اشترك في نشرتنا الإخبارية
اشترك في قائمتنا البريدية
For use with Maxspect Nano-Tech Anaerobic-Blocks to foster the growth of anaerobic heterotrophic bacteria in your aquarium. Recommended Use: Stack two Anaerobic-Blocks horizontally directly in sump, placing a Denitrification Catalyst between the two blocks. The Denitrification Catalyst should be replaced every 2 months, while the blocks themselves will need to be cleaned or replaced roughly every 6 months. Specifications Package Contents - 5 Anaerobic Catalyst pieces Maintenance - Replace every 2 months Requires two Maxspect Anaerobic-Blocks for use
9.000 JD
The Neptune Systems 1Link Male x Male 4 pin cable lets you directly connect your DŌS Fluid Metering System to a 1Link module or EnergyBar 832. By having your DŌS system connected through a 1Link port will let you remove the bulky power supply brick saving room and removing clutter. Features Less Clutter One Cable Installation of DŌS Pump System 10 Feet Long 4 Pin Male x Male Connection Now you no longer need the power supply or Aquabus cable for your DŌS Fluid Metering System. By having the Male x Male 4 pin cable you can now fully control the DŌS pump through your apex with just a single cable through the 1Link module or the EnergyBar 832.
30.000 JD
طقم شفرات لمنظف الزجاج Tunze Care Magnet المميزات: شفرات بديلة مصنوعة من الستانلس ستيل والبلاستيك متوافقة مع Tunze Care Magnet Long (0220.015) وTunze Care Magnet Strong (0220.020) يمكن استخدامها أيضًا كترقية لمنظف Tunze Care Magnet Nano (0220.010) المواصفات: المواد: بلاستيك وستانلس ستيل
14.000 JD
BRS General Bonding Super Glue has a water-like consistency. If you need thicker super glue for your project, we have BRS Extra Thick Super Glue Gel available. The BRS General Bonding Glue has been selected to provide the perfect consistency for aquascaping projects where a thinner glue is needed to get into small gaps between rocks and bond them together. BRS General Bonding Glue is reef safe and ideal for aquascaping with dry live rock. Lower viscosity super glues work better in these cases because they will quickly move to fill in tight gaps between bonding surfaces better than thicker superglues and will provide a fast and secure bond with lower cure times. This allows them to work well for placement between smaller rock pieces when creating a larger structure. This glue can also be used in conjunction with a small amount of mortar or epoxy where there is a need to fill a slightly larger gap between rocks. Thinner glues like this work well for close surface to surface bonds and can also work well for attaching some coral types such as zoanthid mats. Note: Dispensing tips may clog after use, but can be cleaned with acetone to remove excess glue.
6.000 JD
Insta-set accelerator will help speed up the set time of any cyanoacrylate super glue. The most frustrating thing about fragging coral is the time you need to wait for the glue to set, or the frag may simply just fall over and get glue all over. With the accelerator that time spent waiting will be significantly reduced leaving more time for gluing more frags and enjoying your tank. Insta-set is not like other accelerators that smell horrible and have a very strong chemical smell. Bob Smith has put a strawberry scent in their accelerator to make use enjoyable. Insta-set is very easy and safe to use, simply just glue your frag to your plug or tile like you normally would, and then spray a very small amount of Insta-set on the glue, and place in tank water immediately after applying the accelerator due to the heat that will be generated. Special Notes: Keep out of reach of children When using a super glue accelerator it is important to manage the heat that can be produced. With live rock it is not as important to monitor the heat that will be generated from the reaction that will occur, however with coral it is imperative to place the frag in water immediately after applying the Insta-set. Just as long as the heat is monitored Insta-set is very safe to use for many different purposes in the reef tank and around the house.
8.000 JD
Excellent For All Types Of Fish! Great source of protein High levels of fatty acids and HUFA Easy to use and feed Quickly digested Mysis Shrimp is the perfect addition to any fish's diet. With high levels of unsaturated fatty acids, Bulk Reef Supply's Freeze Dried Mysis Shrimp are usually preferred over brine shrimp or krill. The mysis are wild-caught and quickly freeze-dried preserving the natural nutritional characteristics of the shrimp. With any dry food, it is common to soak the pieces in additive powders or solutions like paracoccus, selcon, and other nutritional additives. Typical Analysis Protein - 75.54% Fat - 7.42% Ash - 9.8% Moisture - 2.3%
13.000 JD
Particulate Nutrient Supply for New Reef Aquariums Use for the First 2-3 Months of Cycling Phase Stimulates the Microbiome Includes Trace Elements Like Iodide, Fluoride & Bromide Tropic Marin Phos-Start contains natural marine biopolymers as bacterial food to stimulate the microbiome in the startup phase of the new marine aquarium. Phos-Start is particularly well suited for starting reef tanks using dry rock or for bare bottom tanks. These aquariums typically have a low supply of organic bacterial food and nutrients to stimulate bacterial and coralline algae growth. Phos-Start will fill the gap in nutrient and mineral supply and works to promote good coralline algae growth. It also prepares the aquarium to support and grow corals, including the most sensitive SPS. The microbiome is supplied with vital particulate phosphate as well as bacterial food, calcium, and trace elements as fine particles. The nutrients are dosed in a targeted manner, avoiding unwanted nutrient increases in the water column. Later, these particles can be easily filtered out of the water and/or utilized by the corals resulting in increased coral growth with natural forms in the skeletal structure and bright colors, just like in a thriving coral reef under natural conditions. After completion of the system cycling and first 2-3 months of the system’s operation, we recommend Tropic Marin Phos-Feed for targeted phosphate dosing. Directions for Use: Use for the first 2-3 months during initial cycling phase and in the young aquarium. Tropic Marin Phos-Start can be added at any time of the day or night, but since the application clouds the water somewhat, it's ideal to dose Phos-Start around the time the lights on the aquarium are turned off. This also takes advantage of the nocturnal polyp opening of the corals. Half fill a container with approximately 200ml of water from the aquarium (Do NOT use reverse osmosis water) and add the calculated amount of Phos-Start. Mix powder and water well by stirring. Pour the mixture into a high flow area of the aquarium and rinse the cup with aquarium water. Dosage: Start with a daily dosage of 1 ml (small measuring spoon) Tropic Marin Phos-Start per 100 US gallons of aquarium water. If after four weeks a phosphate concentration between 0.05 ppm and 0.15 ppm is not reached in the aquarium, double the dosage to 2 ml (larger measuring spoon) per 100 US gallons. We recommend not to exceed a maximum dosage of 4 ml per 100 US gallons. Ingredients: Natural calcium carbonate microparticles, phosphate mineral powder, natural biopolymers, iodide, fluoride and bromide. Note: A temporary increase in algae growth is a normal part of a functioning startup phase in marine aquariums. This should not be a cause for concern. An initial temporary brownish discoloration of corals is an indication of the desired nutrient regulation in the aquarium and should also not be any cause for concern.
20.000 JD
Targeted Coral Nutrient Supply Inspired by Natural Biological Principles For Stronger Growth & More Intense Colors Includes Trace Elements Like Iodide, Fluoride & Bromide Phosphate is one of the nutrients with high consumption and often low availability in the reef aquarium. Phosphate is essential in numerous growth processes of the skeleton and tissue of the coral. In a natural coral reef environment, insoluble particulates supply corals with phosphate essential for metabolism and growth. These particles can be very easily filtered out of the water and utilized by the corals. Phos-Feed is modeled after this natural phosphate supply process. Insoluble particulate phosphates are the most effective way to deliver this essential nutrient to the corals. Now, for the first time in your reef aquarium, phosphate is dosed in a targeted manner, without continuously increased phosphate concentration of the water column. As a result, coral growth is stimulated and the corals show natural patterns of skeletal development and bright colors. Directions for Use: Tropic Marin Phos-Feed can be added at any time of the day or night, but since the application clouds the water somewhat, it's ideal to dose Phos-Feed around the time the lights on the aquarium are turned off. This also takes advantage of the nocturnal polyp opening of the corals. Half fill a container with approximately 200ml of RO water and add the calculated amount of Phos-Feed. Stir well to mix the powder and water. Pour the mixture into a high flow area of the aquarium and rinse the cup with aquarium water. Dosage: Start with a daily dosage of 1 ml (small measuring spoon) Tropic Marin Phos-Feed per 50 US gallons of aquarium water. If after four weeks a phosphate concentration between 0.05 ppm and 0.15 ppm is not reached in the aquarium, double the dosage to 2 ml (larger measuring spoon) per 50 US gallons. We recommend not to exceed a maximum dosage of 4 ml per 50 US gallons. Ingredients: Phosphate Mineral Powder, Trace Elements (iodide, fluoride, and bromide); Inactive ingredient: Pro-Reef Sea Salt
25.000 JD 22.000 JD
Tropic Marin Professional Lab is a complete test kit for monitoring water values in marine aquariums. It contains highly precise tests for phosphate, nitrite, nitrate, calcium, magnesium, and carbonate hardness. Reference solutions for Multi-Standard and NP-Standard, as well as illustrated instruction manuals, are also included. Features Comprehensive saltwater testing in a handy, organized case Contains tests for calcium, magnesium, KH/alkalinity, phosphate, nitrite & nitrate Enough for approximately 50 applications As soon as reagents are exhausted, the Professional Lab kit can be easily refilled with Tropic Marin Refill Packs. What’s Included? 1 x Pro Calcium/Magnesium Test (50 individual tests) 1 x Pro KH Test (50 individual tests) 1 x Pro Nitrite/Nitrate Test (50 individual tests) 1 x Pro Phosphate Test (50 individual tests) 1 x Multi-Standard Solution 1 x NP-Standard Solution
110.000 JD
Ultraviolet Light for Clarifying Aquatic Environments The WaveReef UV Sterilizer is an effective tool for controlling and eradicating parasites, algae, fungi, bacteria, and protozoa in saltwater, freshwater, and pond environments. By using high-output UV light, this sterilizer ensures a chemical-free solution to clarify your aquatic ecosystem. When installed and operated correctly, the sterilizer eliminates free-floating microorganisms and enhances overall water quality. WaveReef UV Sterilizers Feature: Secure Mounting Brackets included for stable installation. Optional Molded Hose Barbed Fittings for flexible hose installation (1/2", 3/4", or 1" options available). Can be easily plumbed using standard PVC fittings. Kills most suspended bacteria and viruses in the water column with optimal flow rates for sterilization. Improves Redox Balance in aquariums or ponds, creating a healthier environment. Aids in Parasite Control by reducing their numbers, thereby boosting the immune system of aquatic life. Available Models: HO-UV-18W: 18W HO-UV-27W: 27W HO-UV-40W: 40W HO-UV-90W: 90W Impressive Performance / Smart Ballast The WaveReef HO-UV Sterilizer is designed for ponds, aquariums, and water features, providing impressive performance and user-friendly features. With a high-output T5 UV bulb, this sterilizer ensures optimal sterilization efficiency while occupying minimal space. Its compact design enables easy installation and maintenance, ensuring clear water in as little as 3 to 5 days, and sometimes even overnight. Compared to normal T5 UV bulbs of the same power, the WaveReef UV bulbs are nearly half the length, making them ideal for use in marine hobby setups. Key Features: Maximum Operating Pressure: 30 PSI. Quartz Sleeve Protection for added safety and performance efficiency. Temperature-Adjusting UV Bulb ensures long-lasting performance, extending the bulb life to up to 10,000 hours. Waterproof Smart Electronic Ballast enhances safety and functionality, ensuring smooth operation across various water conditions. HO-UV-18W: Wattage: 18W T5 HO- UV Lamp Length: 212mm Current: 800mA UVC Output: 50 µW/cm² UV Power: 5.0W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 400 gph Max Tank Volume (Saltwater): 80G/120–300L Max Flow Rate (Freshwater): 500 gph Max Tank Volume (Freshwater): 100G/150–375L HO-UV-27W: Wattage: 27W T5 HO- UV Lamp Length: 287mm Current: 800mA UVC Output: 75 µW/cm² UV Power: 7.5W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 600 gph Max Tank Volume (Saltwater): 140G/200–500L Max Flow Rate (Freshwater): 750 gph Max Tank Volume (Freshwater): 175G/265–660L HO-UV-40W: Wattage: 40W T5 HO- UV Lamp Length: 400mm Current: 800mA UVC Output: 105 µW/cm² UV Power: 11.5W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 1000 gph Max Tank Volume (Saltwater): 400G/600–1500L Max Flow Rate (Freshwater): 1250 gph Max Tank Volume (Freshwater): 500G/750–1875L HO-UV-90W: Wattage: 90W T5 HO- UV Lamp Length: 530mm Current: 800mA UVC Output: 270 µW/cm² UV Power: 30.0W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 3000 gph Max Tank Volume (Saltwater): 1000G/2000–4000L Max Flow Rate (Freshwater): 3750 gph Max Tank Volume (Freshwater): 1250G/2500–5000L
140.000 JD
Ultraviolet Light for Clarifying Aquatic Environments The WaveReef UV Sterilizer is an effective tool for controlling and eradicating parasites, algae, fungi, bacteria, and protozoa in saltwater, freshwater, and pond environments. By using high-output UV light, this sterilizer ensures a chemical-free solution to clarify your aquatic ecosystem. When installed and operated correctly, the sterilizer eliminates free-floating microorganisms and enhances overall water quality. WaveReef UV Sterilizers Feature: Secure Mounting Brackets included for stable installation. Optional Molded Hose Barbed Fittings for flexible hose installation (1/2", 3/4", or 1" options available). Can be easily plumbed using standard PVC fittings. Kills most suspended bacteria and viruses in the water column with optimal flow rates for sterilization. Improves Redox Balance in aquariums or ponds, creating a healthier environment. Aids in Parasite Control by reducing their numbers, thereby boosting the immune system of aquatic life. Available Models: HO-UV-18W: 18W HO-UV-27W: 27W HO-UV-40W: 40W HO-UV-90W: 90W Impressive Performance / Smart Ballast The WaveReef HO-UV Sterilizer is designed for ponds, aquariums, and water features, providing impressive performance and user-friendly features. With a high-output T5 UV bulb, this sterilizer ensures optimal sterilization efficiency while occupying minimal space. Its compact design enables easy installation and maintenance, ensuring clear water in as little as 3 to 5 days, and sometimes even overnight. Compared to normal T5 UV bulbs of the same power, the WaveReef UV bulbs are nearly half the length, making them ideal for use in marine hobby setups. Key Features: Maximum Operating Pressure: 30 PSI. Quartz Sleeve Protection for added safety and performance efficiency. Temperature-Adjusting UV Bulb ensures long-lasting performance, extending the bulb life to up to 10,000 hours. Waterproof Smart Electronic Ballast enhances safety and functionality, ensuring smooth operation across various water conditions. HO-UV-18W: Wattage: 18W T5 HO- UV Lamp Length: 212mm Current: 800mA UVC Output: 50 µW/cm² UV Power: 5.0W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 400 gph Max Tank Volume (Saltwater): 80G/120–300L Max Flow Rate (Freshwater): 500 gph Max Tank Volume (Freshwater): 100G/150–375L HO-UV-27W: Wattage: 27W T5 HO- UV Lamp Length: 287mm Current: 800mA UVC Output: 75 µW/cm² UV Power: 7.5W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 600 gph Max Tank Volume (Saltwater): 140G/200–500L Max Flow Rate (Freshwater): 750 gph Max Tank Volume (Freshwater): 175G/265–660L HO-UV-40W: Wattage: 40W T5 HO- UV Lamp Length: 400mm Current: 800mA UVC Output: 105 µW/cm² UV Power: 11.5W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 1000 gph Max Tank Volume (Saltwater): 400G/600–1500L Max Flow Rate (Freshwater): 1250 gph Max Tank Volume (Freshwater): 500G/750–1875L HO-UV-90W: Wattage: 90W T5 HO- UV Lamp Length: 530mm Current: 800mA UVC Output: 270 µW/cm² UV Power: 30.0W Bulb Life: 10,000 hours Inlet & Outlet: 2"– 2" Max Flow Rate (Saltwater): 3000 gph Max Tank Volume (Saltwater): 1000G/2000–4000L Max Flow Rate (Freshwater): 3750 gph Max Tank Volume (Freshwater): 1250G/2500–5000L
180.000 JD
Smart roller automatic filter rollers eliminate the need for filter socks and automatically remove particles from your aquarium water. The result? Crystal clear water, waste removal before it breaks down, and reduced daily maintenance.
160.000 JD
Replacement fleece rolls for the Wavereef Fleece Roller Filter. Although specific lifespan will vary according to system parameters such as volume, bio-load, feeding schedule, and initial water quality; each 105' roll of filter fleece should last roughly 4 weeks on a moderately stocked reef system. Bare-bottom tanks will typically exhaust rolls at a faster rate. Additionally, usage rate may be significantly higher for the first few weeks after installing a filter while your system adjusts to the new level of mechanical filtration.
10.000 JD
Replacement fleece rolls for the Wavereef Fleece Roller Filter. Although specific lifespan will vary according to system parameters such as volume, bio-load, feeding schedule, and initial water quality; each 105' roll of filter fleece should last roughly 4 weeks on a moderately stocked reef system. Bare-bottom tanks will typically exhaust rolls at a faster rate. Additionally, usage rate may be significantly higher for the first few weeks after installing a filter while your system adjusts to the new level of mechanical filtration.
11.000 JD
Replacement fleece rolls for the Wavereef Fleece Roller Filter. Although specific lifespan will vary according to system parameters such as volume, bio-load, feeding schedule, and initial water quality; each 105' roll of filter fleece should last roughly 4 weeks on a moderately stocked reef system. Bare-bottom tanks will typically exhaust rolls at a faster rate. Additionally, usage rate may be significantly higher for the first few weeks after installing a filter while your system adjusts to the new level of mechanical filtration.
9.000 JD
The Best-In-Class Just Keeps Getting Better! The newest generation of EcoTech Radion continues to lead the way in the industry with mind-blowing improvements in light output and color. With a new LED cluster, Hybrid Hemispherically Edge Illuminating (HEI2) optical system, and diodes pushing deeper into the UV spectrum; the G6 Radions are bound to become your new favorite LED reef light. Why does BRS recommend the EcoTech Marine Radion? Quite simply, EcoTech Marine Radions are the LED’s we most often choose to light our own tanks. With the chance to use just about any light we want, there are probably more Radions in use around BRS than any other LED fixture. Through years of experience, we’ve seen the proven results in our growing, thriving reefs. From Aquaculture to the home aquarium, there is a high likelihood that the coral you know and love has been grown or “colored-up” under a generation of Radions. Features and Improvements to the Radion G6 Radions are the standard in aquarium lighting for a reason. Each generation has built upon the successful results of the last, incorporating the latest in design and technology to bring us a state-of-the-art light that blends proven results with greater ease of use. Ecotech Marine has spent significant time and effort in developing and testing lighting programs, such as the popular SPS AB+, that deliver maximum results from their fixtures and bring out the best in our corals. The Radion G6 incorporates a new Hemispherically Edge Illuminating optic system with redesigned LED placement to deliver beautiful shimmer, superior color mixing, even PAR, incredible spread, and even adjustable hues! New HEI2 Optic System Super-Wide 126.3 Degree Spread 395nm Diodes for Ultimate Fluorescence Rebalanced Color Channels and LED Mix Even PAR & High Output-- Almost 4ft of Coverage Area Moonlight & Weather Simulation Proven CoralLab AB+ Spectrum Fully Programmable Wireless Mobius App control Mind-Blowing Spread with HEI2 Optical System The Radion G6 achieves its mind-blowing 126.3 degree spread through a new and improved optical system. EcoTech implemented a change to the primary lens on the LEDs, which then integrates with the geometry of the existing HEI (Hemispherically Edge Illuminating) secondary lens to increase the output from an already impressive 110.5 to an outstanding 126.3 degrees! The super-wide spread has an added benefit of increasing output by reflecting off the aquarium side glass walls and reflecting light back into the tank, thus reducing shadows and providing light to the undersides of corals. This means that you can now light your tanks with even less fixtures! The G6 has the highest average output out of all Radions and can provide even PAR across almost four feet of coverage area, making it perhaps the most efficient aquarium light made to date. Blue vs. Pro The Radion G6 BLUE has gotten even bluer! Adjustments to the diode mix and the addition of 395nm offer new depths of color intensity and increased fluorescence. With the G6, you now have the ability to tune the Blue between actinic and crisp to find the perfect aesthetics for your tank. The Radion G6 PRO is what you see as the lighting of choice in many public aquariums, aquaculture facilities, and coral spawning laboratories worldwide. It features a balanced LED mix with proven spectrums similar to the output of Metal Halide lighting. Compact & Sleek, High-Quality Design EcoTech Marine aims to produce the most minimally intrusive reef aquarium equipment available. The G6 continues to showcase Radion’s sleek styling, small footprint, and quiet fan with revolutionary heatsink. The Radion boasts a technologically superior design with premium quality components and unmatched customer support. Better yet, the Radion G6 is still backwards compatible with the extensive mounting options and accessories available to the previous generation of Radion, so you can still customize your lighting experience to fit your individual aquarium needs. Mobius Control More colors mean more channels, and with Mobius, programming and controlling your G6 is even easier and faster. Mobius means almost instant setup and programming. Local wireless control and programming can be accomplished with either current OS version iOS or Android smart device. Experience the ultimate app-based control at your fingertips-- no separate controller purchase required! With the Mobius smart control platform, you can connect, control, and program your entire collection of EcoTech equipment easily with your iOS or Android smart device. That means centralized control of pumps, lights, dosing, and flow without needing to purchase expensive modules and controllers. The app's visual interface is intuitive and simplified-- the way aquarium automation should be. You can easily download Mobius for free from the App Store or Google Play. Compatible with MXMNeptune Systems, EcoTech Marine, and AquaIllumination have joined forces to bring MXM to life. Now all your favorite EcoTech and AI pumps and lights can be under the wireless control of Apex & Apex Fusion—the user-friendly, yet powerful, interface you already know and love. No more switching between multiple apps. LED Details 8x Cool White 32x Royal Blue 32x Blue 2x Red 4x UV (395nm) 2x UV (405nm) 4x UV (415nm) 12x Violet (430nm) 4x Warm White Specifications: Dimensions: 11.8" L x 7" W x 1.5" H Weight: 4.5 lbs Cable Length: 13 Feet Power Input: 100-240VAC 4.0A 50/60Hz Variable Usage (MAX): 205W Recommended Mounting Height - 8-10" What's Included? XR30 G6 Blue Radion LED Fixture Power Supply Power Adapter Cable Microfiber Cloth Eyelet Mounts Quick Start Guide Mounting Ecotech offers multiple types of mounting solutions for the G6 family of Radion LED lights. From full tank track systems letting you use multiple G6 Radion lights, to single light RMS mounting arms and hanging kits. RMS Mounting Arm - For mounting a single light fixture over your tank. Lights may be mounted at 90-degree increments. RMS Track System - The 3 piece system lets you mount multiple Radion lights in a single track that lets you slide them back and forth to create the best coverage for your tank. The multi-light rail kit is available in lengths up to 8ft and is perfect for larger tanks, letting you use either a hanging kit to suspend the track system or the RMS Arm Kit for a tank mounting option. RMS multi-light kits work with both XR15 and XR30 model lights or a mixture of both. RMS Hanging Kit - If tank mounting is not an option for your multilight rail - or you prefer an even more minimal aesthetic - hang the multi-light rail.
800.000 JD 740.000 JD
Hanna HI702-25 includes 25 pre-measured reagent packets that can be used with the HI702 High Range Copper Checker. Each package has been designed for a single use and allows for a perfect reagent measurement that will not become contaminated. The reagents use the Bicinchoninate Method which produces a purple tinted water when copper is present, allowing the HI702 Checker to produce a reading in parts per million. What's Included? 25x HI702 High Range Copper Reagents
18.000 JD
Replacement fleece rolls for the Wavereef Fleece Roller Filter. Although specific lifespan will vary according to system parameters such as volume, bio-load, feeding schedule, and initial water quality; each 105' roll of filter fleece should last roughly 4 weeks on a moderately stocked reef system. Bare-bottom tanks will typically exhaust rolls at a faster rate. Additionally, usage rate may be significantly higher for the first few weeks after installing a filter while your system adjusts to the new level of mechanical filtration.
12.000 JD
Replacement fleece rolls for the Wavereef Fleece Roller Filter. Although specific lifespan will vary according to system parameters such as volume, bio-load, feeding schedule, and initial water quality; each 105' roll of filter fleece should last roughly 4 weeks on a moderately stocked reef system. Bare-bottom tanks will typically exhaust rolls at a faster rate. Additionally, usage rate may be significantly higher for the first few weeks after installing a filter while your system adjusts to the new level of mechanical filtration.
16.000 JD
C-Dip Coral Dip – نظام غمس مرجاني من مرحلتين (Two-Stage Coral Dip) يُعد C-Dip أول نظام من نوعه في العالم مكوّن من مرحلتين لمعالجة الشعاب المرجانية، مصمم لحماية المرجان من الطفيليات والالتهابات البكتيرية دون استخدام اليود أو المواد المؤكسدة. يعتمد النظام على مرحلتين متتاليتين تعملان بشكل تكاملي: إزالة وتنظيف أولي للطفيليات (C-Dip 1) دعم الحماية والتعافي وتقليل التوتر (C-Dip 2) C-Dip 1 – المرحلة الأولى (التنظيف والمعالجة) الوظيفة: فعال جدًا ضد الطفيليات والالتهابات البكتيرية يحتوي على مواد نافذة تؤثر على بيوض الطفيليات خالٍ من اليود أو المواد المؤكسدة طريقة الاستخدام: إضافة 12 قطرة لكل 1 لتر ماء خلط جيد للمحلول وضع المرجان وتحريكه بلطف عدة مرات داخل المحلول يمكن استخدام مضخة صغيرة للحركة بعد 5 دقائق يتم نقل المرجان مباشرة إلى المرحلة الثانية (C-Dip 2) لا يُعاد استخدام المحلول بعد الاستخدام تحذير: قد يسبب تهيجًا للعين والجلد – يجب غسل اليدين بعد الاستخدام. C-Dip 2 – المرحلة الثانية (الحماية والتعافي) الوظيفة: يوفر طبقة حماية إضافية ضد الطفيليات والبكتيريا يساعد المرجان على التعافي من الإجهاد والأضرار الناتجة عن النقل أو الإصابة خالٍ أيضًا من اليود والمؤكسدات طريقة الاستخدام: رج العبوة جيدًا قبل الاستخدام إضافة 12 قطرة لكل 1 لتر ماء وضع المرجان في المحلول لمدة 30 دقيقة يمكن استخدام مضخة صغيرة للحركة بعد الانتهاء، يتم نقل المرجان مباشرة إلى الحوض أو حوض الحجر الصحي لا يُعاد استخدام المحلول إعادة الاستخدام (عند الحاجة): يمكن تكرار دورة C-Dip 1 و C-Dip 2 حتى 4 مرات خلال 5 أيام حسب الحاجة كل استخدام يجب أن يكون في محلول جديد ملاحظات مهمة: للاستخدام فقط كحمام غمر خارجي (Immersion dip) لا يُستخدم داخل الحوض الرئيسي لا يتم خلطه مع أي منتجات أخرى يمنع إعادة استخدام المحلول بعد الغمر
45.000 JD 44.000 JD
Modern Reef CyanoCleaner 100ml Product Overview Modern Reef CyanoCleaner is a treatment solution designed to address cyanobacteria issues in marine reef aquariums. It works by oxidising organic buildup while supporting balanced biological activity within the aquarium system. Key Features Treatment formulated for cyanobacteria management in reef aquariums. Works by oxidising organic sludge within the system. Designed to support enzyme balance during treatment. Suitable for use in reef aquariums with fish, invertebrates and corals. 100ml bottle treats up to approximately 1000 litres. Benefits Helps address cyanobacteria-related issues in marine systems. Supports maintenance of biological balance during treatment. Suitable for reef aquariums containing corals and invertebrates. Designed for controlled treatment applications. Specifications Product Type: Aquarium treatment solution Target Issue: Cyanobacteria management Volume: 100ml Recommended Dose: 10ml per 100L aquarium water Treatment Capacity: Up to approx. 1000L Compatibility Suitable for marine reef aquariums containing fish, corals and invertebrates when used according to recommended treatment guidelines. Package Contents 100ml bottle of Modern Reef CyanoCleaner
35.000 JD
نظام Modern Reef RKS 7.7x المتكامل طقم 4×5 لتر (KH1, KH2, CAL, MAG) ارتقِ بحوضك البحري إلى مستوى احترافي مع نظام RKS 7.7x، الحل المتكامل الذي يوفر الاستقرار، النمو، والألوان المذهلة بطريقة ذكية تعتمد على استهلاك KH. لماذا هذا النظام؟ تم تطويره من قبل خبراء الريف، ليقدم نظامًا ذكيًا متوازنًا يلغي الحاجة لعدة منتجات. نظام متكامل يحتوي على جميع العناصر النزرة والأحماض الأمينية يغطي الكالسيوم والقلوية والمغنيسيوم لا حاجة لأي إضافات أخرى تقنية الاستهلاك النسبي يعتمد على استهلاك KH يمنع التراكم الزائد أو الجرعات الخاطئة يتكيف مع أي نظام حوض تحسين الألوان والنمو يعزز الألوان الصعبة مثل الأصفر والبرتقالي يقوي الأحمر والوردي والأزرق والبنفسجي يحسن ألوان وامتداد بوليب الكورال محفز للبروتينات اللونية غير الفلورية الأداء نمو أسرع للكورال تحسين صفاء الماء لا حاجة لفحص الكالسيوم والمغنيسيوم بشكل متكرر خالٍ من النترات والفوسفات التركيز 10 مل لكل 100 لتر ترفع 2 dKH الجرعات الطريقة: إضافة كميات متساوية من الأربعة أجزاء الهدف: KH بين 6.8 – 8 الكالسيوم بين 380 – 420 التعديل: انخفاض الكالسيوم → زيادة الجرعة ارتفاع الكالسيوم → تقليل الجرعة نصائح يفضل استخدام مضخة جرعات 4 قنوات يمكن دمج KH1 و KH2 إذا كانت المضخة 3 قنوات توزيع الجرعات على مدار اليوم ترك فاصل 10–15 دقيقة بين كل جرعة ملاحظات مهمة لا تستخدم منتجات إضافية مشابهة يُحفظ في مكان مظلم وبارد تجنب الضوء المباشر لا يحتاج رج أو خلط
150.000 JD
نظام تربية الشعاب المرجانية المتكامل (All-in-One) باستهلاك نسبي (RKS) مجموعة 4 × 5 لتر(Base KH1, Base KH2, Base CAL, Base MAG) يحتوي هذا النظام على جميع العناصر النزرة الأساسية الموجودة في مياه البحر الطبيعية، بالإضافة إلى المغذيات الدقيقة العضوية وغير العضوية والأحماض الأمينية ضمن مجموعة واحدة مكونة من 4 عبوات. كل ما تحتاجه للحفاظ على حوض شعاب مرجانية حديث مزدهر ومليء بالألوان. تركيبة فريدة تعتمد على الاستهلاك النسبي تم تطويرها واستخدامها من قبل Akil من Euro Corals لإنتاج مرجان عالي الجودة. يُعد Modern Reef – Reef Keeping System الأساس لهذا النظام إلى جانب Complete Reef Food وPolypop. بمجرد تحديد الجرعة المناسبة ومستوى KH المثالي، سيوفر النظام كل ما يحتاجه الحوض للنمو والتلوين بناءً على استهلاك القلوية (KH) والكالسيوم (Ca). المميزات مطور لتعزيز الألوان الصعبة مثل الأصفر والبرتقالييعزز الألوان الأحمر، الوردي، الأزرق والبنفسجي، خاصة في مرجان Acroporaيحفّز البروتينات اللونية غير الفلورية لتحسين التلوينمصمم لأحواض بإضاءة طيف أزرق لتعزيز الفلورسنسيزيد معدل النمو بشكل ملحوظ عند استخدامه مع Complete Reef Foodيحسن صفاء المياه عبر تعزيز نمو الإسفنج والكائنات البحريةلا حاجة لفحص المغنيسيوم والكالسيوم باستمرار، فقط KHلا حاجة لأي منتجات إضافية مثل الأحماض الأمينية أو العناصر النزرةنظام جرعات محسوب لتجنب الجرعات الزائدة أو التراكمات الضارةخالٍ من النترات (NO3) والفوسفات (PO4)يتكيف مع أي إعداد حوض أو نظام تصفيةالتركيز 10 مل لكل 100 لتر ترفع KH بمقدار 1 dKH التحضير المنتج جاهز للاستخدام ويتكون من 4 أجزاء سائلة متساوية. يمكن استخدامه يدويًا، لكن يُفضل استخدام مضخة جرعات، خاصة في أحواض SPS. إذا كانت المضخة تحتوي على 3 رؤوس فقط: يمكن دمج KH1 وKH2 في عبوة واحدةيتم مضاعفة الجرعة الناتجةنصائح لضبط الجرعاتيجب أن تكون أطوال الأنابيب متساويةمعايرة المضخة كل 6 أشهرترك فاصل 10–15 دقيقة بين كل جرعةترتيب الجرعات: KH1 ثم CAL ثم KH2 ثم MAGتوزيع الجرعات على مدار اليومالجرعةيتم إضافة كميات متساوية من جميع المكوناتالحفاظ على KH بين 6.8 – 8 dKHالحفاظ على الكالسيوم بين 380 – 420 ppmمثال 1 إذا كان KH = 7.5 والكالسيوم ينخفض → قم بزيادة الجرعة للحفاظ على KH عند 7.7 ثم أعد الفحص مثال 2 إذا كان KH = 8 والكالسيوم يرتفع → قم بتقليل الجرعة للحفاظ على KH عند 7.8 ثم أعد الفحص بعد تحديد المستوى المثالي، لا حاجة لفحص الكالسيوم بشكل متكرر. ملاحظات لا يحتاج المنتج إلى الرج أو التحريكتجنب استخدام أي مكملات إضافية أثناء الاستخدامالتحذيراتيُحفظ في مكان مظلم أو مظلللا يُعرض لأشعة الشمس المباشرة أو إضاءة الحوضيُفضل استخدام العبوات الأصليةالضوء القوي قد يؤثر على استقرار العناصرقد تنمو كائنات دقيقة في العبوات الشفافة عند التعرض للضوء التخزين لا يحتاج إلى تبريديُحفظ في مكان بارد عند التخزين
110.000 JD
Our extremely compact PLAY water feature pumps have a variety of possible uses for the garden pond: The pumps can be used for decorative fountains and statues or for supplying water to small streams. The PLAY pumps are reliable and silent with max. outputs from 1000 to 3,500 l/h. Energy-saving, silent, durable! Compact dimensions - ideal for small ponds Choice of 2 nozzles for different water features Separately adjustable water outlet for supplying ornamental fountains and streams at the same time Extremely low-maintenance and easy to clean With overheating protection in case of low water levels Scope of delivery: PLAY1000 water feature pum Telescopic pipe with 2 way flow control (can be controlled separately) Choice of 2 water feature nozzles Connection set (3 pieces) 10 m power cable Cable length: 10 m Dimensions w x d x h: 143 x 101 x 109 mm Manufacturer guarantee: 3 Year(s) Maximum delivery head: 1,2 m Maximum flow rate: 870 l/h Power: 9 W Power supply: 220-240 / 50 V/Hz Pressure: 120 mbar
70.000 JD
تم عرض 360 من اصل 437 منتج
اشترك في قائمتنا البريدية