اشترك في نشرتنا الإخبارية
اشترك في قائمتنا البريدية
خصومات
-
Tropic Marin تروبيك مارين بوتاسيوم ٥٠٠ مل
Potassium is an essential macronutrient for all living organisms and occurs in natural seawater at a concentration of 408 mg/l. Adjusting the potassium concentration to the natural level with Tropic Marin® Potassium in case of a potassium deficiency can sometimes give a vitality boost to various corals. Before using Tropic Marin® Potassium, carefully determine the potassium concentration with a water test (e.g. Tropic Marin® K+ Test Pro). Advantages: Provides potassium in the aquarium Essential macronutrient for plants and corals Improves coral coloration and vitality Tropic Marin® Potassium contains 100 mg/ml potassium. A dosage of 10 ml Tropic Marin® Potassium per 100 litres of water increases the potassium concentration in the water by 10 mg/l. A daily dosage of 20 ml potassium per 100 litres of water should not be exceeded. Individual coral species can react to low potassium concentrations in aquarium water with stunted growth and weak coloration. Potassium is present in seawater in a concentration of approximately 408 mg/l. The potassium concentration should never be increased above the natural concentration – too high potassium concentrations are dangerous for sensitive animals. Therefore, before using Tropic Marin® Potassium, carefully determine the potassium concentration with our Tropic Marin® K+ Test Professional.
18.000 JD 16.000 JD
-
Tropic Marin تروبيك مارين - معزز يود (ايوداين)
من بين جميع العناصر النزرة الموجودة في مياه البحر الطبيعية، يُعد اليود من أكثرها ارتباطًا بمجموعة واسعة من التأثيرات. يساعد اليود في الوقاية من تضخم الغدة الدرقية كونه مكونًا أساسيًا لهرمونات الغدة الدرقية. كما أنه ضروري لتقوية وتصلب الهيكل الكيتيني للقشريات. تقوم الطحالب الحمراء الكلسية بترسيب اليود في بنيتها السطحية، كما تقوم المرجانيات (Gorgonians) بترسيبه في الهيكل المحوري. أظهرت التجارب بوضوح أن Tropic Marin Pro-Coral Iodine يحسن تكيف الكائنات مع الإضاءة ويعزز تلوّن الأنثوزوا، خاصة الشعاب المرجانية الصلبة. ونظرًا لعدم استقرار اليود في المحاليل، يجب إضافته إلى أحواض المياه المالحة بشكل منتظم. يحتوي المنتج على اليود في أكثر أشكاله فعالية، وهو اليود العنصري (I²). Tropic Marin Pro-Coral Iodineمحلول لوغول (Lugol’s solution) لأحواض المياه المالحة عنصر نزر أساسي للكائنات البحرية يحسن التكيف مع الإضاءة ويعزز تلوّن الأنثوزوا، خاصة الشعاب المرجانية الصلبة الجرعة الموصى بها:أضف قطرة واحدة من Tropic Marin Pro-Coral Iodine لكل 200 لتر من الماء يوميًا في مسار تدفق النظام.في حال نسيان يوم جرعة، يتم تخطيها دون تعويضها. لا تقم بإضافة جرعات مضاعفة لتعويض الأيام الفائتة. تزداد حاجة اليود مع زيادة كثافة الكائنات في الحوض. في الأحواض ذات الكثافة العالية يمكن زيادة الجرعة حتى الحد الأقصى: قطرة واحدة لكل 100 لتر من الماء يوميًا.
12.000 JD
-
Tropic Marin تروبيك مارين A- إيليمنتس 1000 مل
Essential Anionic Trace Element Supplement for Reef Aquariums Dose with Pro-Coral K- Trace 1 For the best results! In the ocean, there are tiny amounts of essential trace elements such as iodine, lithium, manganese, etc. that can be depleted rapidly in household aquariums as corals and invertebrates grow. Tropic Marin Pro-Coral A- and Pro-Coral K+ are formulated to replenish those elements in an easy to dose balanced, liquid additive. When trace element levels start to get low corals can lose their color and stop growing completely. Doser Ready Easy to use No mixing required to use Contains required anionic trace elements Supports natural coral color and growth Instructions: For a complete trace elements supply, we recommend the use of both trace element solutions, Pro-Coral A- and Pro-Coral K+. Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand for trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Maximum dosage: Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Pro-Coral A- Trace 2 Contains: Bromine Fluorine Iodine Lithium Molybdenum Selenium Vanadium
30.000 JD 29.000 JD
-
Tropic Marin تروبيك مارين K+ إيليمنتس 1000 مل
Essential Cationic Trace Element Supplement for Reef Aquariums Dose with Pro-Coral A- Trace 2 For the best results! In the ocean, there are tiny amounts of essential trace elements such as iodine, lithium, manganese, etc. that can be depleted rapidly in household aquariums as corals and invertebrates grow. Tropic Marin Pro-Coral K+ and Pro-Coral A- are formulated to replenish those elements in an easy to dose balanced, liquid additive. When trace element levels start to get low corals can lose their color and stop growing completely. Doser Ready Easy to use No mixing required to use Contains required cationic trace elements Supports natural coral color and growth Instructions: For a complete trace elements supply, we recommend the use of both trace element solutions, Pro-Coral A- and Pro-Coral K+. Add 1 ml trace elements of each solution per 100 l / 25 US-Gal. of aquarium system water volume daily. The trace elements solution must not get directly onto the animals. The demand for trace elements increases with increased aquarium population density. In heavily populated aquariums, dosage may be increased up to the maximum dosage below. Maximum dosage: Do not exceed a dosage of 2 ml per 100 l / 25 gallons of aquarium system water volume per day. Pro-Coral K+ Trace 1 Contains: Barium Boron Chrome Cobalt Iron Copper Manganese Nickel Strontium Zinc
29.000 JD
-
Tropic Marin ملح البحر تروبيك مارين برو-ريف 10 كجم
Tropic Marin PRO-REEF Sea Salt 25kg Features: The pharmaceutical grade sea salt especially for modern reef aquaria. Tropic Marin® PRO-REEF Sea Salt has been designed to meet the special requirements of reef aquariums with optimized concentrations of calcium and magnesium, which promote the growth of corals. The lower buffering and the correct pH value serve to stabilize the natural water values, and particularly, the hardness of carbonates, even with the use of calcium reactors. Natural and stable conditions for delicate marine life are achieved only by accurately balancing all influencing factors. Tropic Marin® PRO-REEF is thus the ideal foundation for the care and growth of fish, corals and other aquatic invertebrates in modern reef aquariums. Use seawater prepared with Tropic Marin® PRO-REEF for regular water changes in your seawater aquarium, to start a new aquarium and to re-equilibrate the pH of a tank. Benefits: • Optimizes calcium- and magnesium concentrations as well as alkalinity and pH. • Designed to meet the special requirements of modern reef aquaria with higher calcium requirements. • Especially designed for use with calcium reactors or mineral additives. • To maintain the alkalinity in a 7-8° dKH range. • Manufactured from pure, pharmaceutical grade salts. • Contains all major- and minor elements in the exact proportions found in tropical sea water. • The 70 trace elements are completely soluble due to the use of the mixed-crystal method. • Compliance with the most stringent quality control measures for the production of pharmaceuticals ensures nature-identical seawater. • Free from nitrates, phosphates and other unwanted chemicals. How to use: To achieve a salinity level of 32-35 ‰ (psu), dissolve 35 ml of Tropic Marin® PRO-REEF per liter or approximately ½ cup of Tropic Marin® PRO-REEF per US gallon water. Dissolve almost all of the salt in a clean container already filled with the full volume of RO/DI water at a temperature of 73-77°F / 23-25°C while circulating/stirring the water. Do not concentrate the mixture by adding the full amount of salt to a smaller amount of water. Note: Always add the salt to the water, never the water to the salt. Making a concentrated mixture will cause a calcium carbonate precipitate to form. When you have added ALMOST all of the salt and the mixture is fully dissolved and clear, start measuring the specific gravity with a hydrometer or similar instrument. Keep adding small amounts of salt until the specific gravity is the value you desire. The specific gravity of the sea salt solution should range from 1.025 to 1.027 (at 73-77°F / 23-25°C) and the pH-value should be in the range of 8.0 – 8.4. If all parameters are correct, the salt water is ready to use. After setting up a new aquarium it takes a few weeks of water being circulated and correct lighting conditions to achieve the biologically stable environment required for the care and breeding of delicate marine organisms. A weekly, partial water change, replacing 10 % of the total water volume with Tropic Marin® PRO-REEF, will help to maintain the water quality that your livestock needs for good health. Parameters: approx. 7° KH, calcium approx. 440 ppm, magnesium approx. 1350 ppm Application: For reef tanks with higher calcium requirements. To maintain the alkalinity in a 7-8° dKH range; particularly suitable when using a calcium reactor. Use the new dosing calculator for an easy determination of the required amount of salt for your aquarium.
40.000 JD 38.000 JD
-
Tropic Marin تروبيك مارين إليمي-فوس رابيد ٥٠٠ مل
Don't let excess phosphate ruin your tank with nuisance algae and poor coral health. Elimi-Phos Rapid is a Lanthanum-based treatment for extremely rapid and highly-effective phosphate reduction. Particularly during new aquarium "break-in" and during rock curing and cycling, phosphate can often rapidly accumulate in the water. During this time Lanthanum chloride products are ideal for rapidly precipitating phosphate from the water column to prevent future issues in a maturing aquarium. In some cases in an established aquarium, an accumulation of phosphates from various sources may benefit from rapid but controlled phosphate reduction in order to restore recommended levels. Excessive phosphates in the water can lead to strong algae growth and a reduction in the growth of corals. This is why it is important to monitor the phosphate concentration in an aquarium regularly and maintain the level in the optimum range. We recommend a general range of phosphate from 0.02 ppm to 0.15 ppm and in reef aquariums from 0.02 ppm to 0.1 ppm. Elimi-Phos Rapid is a highly-effective solution based on Lanthanum which binds phosphates rapidly and eliminates them from the water. Phosphate can be lowered quickly to a range between 0.2 – 0.4 mg/l (ppm). Lanthanum-based phosphate removers are also convenient because they can be dosed by hand or with the use of a dosing pump in very precise amounts for specific targeted reductions. Key Benefits Extremely rapid removal of high phosphates Highly-effective Lanthanum based solution Phosphate concentration can be lowered quickly to a range between 0.2 – 0.4 mg/l (ppm) Directions for Use 500 ml of Elimi-Phos Rapid will bind up to 5 grams of phosphates, i.e. 10 mL per 26 gallons will reduce phosphate concentrations by up to 1 ppm. Phosphate reduction treatment is most effective with a skimmer or fine mechanical filter which will remove the precipitated phosphate from the system. A dropwise addition directly before filtration using a dosing pump is optimal. Measure the phosphate concentration in your aquarium and then calculate the required amount of Elimi-Phos Rapid. We recommend reducing the phosphate concentration by no more than 0.1 ppm per day. This equates to a maximum of 1 ml per 26 gallons of system water volume. Note: All organisms require traces of phosphate. 0.00 ppm phosphate is not recommended. The optimum range for a reef tank is .02 ppm to .1 ppm. Caution: 1. Some tangs and potentially other fish may be sensitive to Lanthanum treatments. Excercise caution and do not dose to the display. In tanks where this may be a concern, we recommend starting at a very low dosage followed by careful observation. Should you observe any signs of stress in individual organisms, you should stop the treatment for 1 – 2 days or until the symptoms have disappeared and then continue at a half dose.2. Keep an eye on the carbonate hardness as occasionally it can drop slightly.
18.000 JD
-
Tropic Marin تروبيك مارين كاربون 400 جرام
Tropic Marin Carbon are highly efficient activated carbon pellets for use in fresh and marine water aquaria. The Carbon combats yellow matter an harmful substances from the aquarium water. Yellow matter and harmful substances have an adverse effect on the conditions in an aquarium. The water needs to be free of yellow matter if the light is to be allowed to penetrate unfiltered to the corals, plants and fish and bring out their natural colours. Tropic Marin Carbon is a highly efficient activated carbon with a powerful capacity for adsorbing yellow matter and harmful substances without releasing excessive amounts of phosphate and silicate. Tropic Marin Carbon highly efficient activated carbon to combat yellow matter and harmful substances powerful capacity for adsorbing substances for an optimum light availability in the aquarium only very small amounts of phosphates and silicates are released corals, plants and fish and bring out their natural colors Tropic Marin Carbon use and dosage:400 g Tropic Marin Carbon are sufficient for 800 l of aquarium water. For continuos use of activated carbon it is recommended to filtering approx. 1% of the tank volume per hour through the carbon. Experience has shown that it is advisable to change Tropic Marin Carbon after no more than 8 weeks. Alternatively the carbon can, if necessary (for example after application of medications), be run through a rapid-flow filter over 1 to 3 days.
16.000 JD
-
Tropic Marin مجموعة اختبار مختبر تروبيك مارين المدمجة
One Set - 5 Parameters - Over 250 Tests! 100 pH Tests 100 Alkalinity Tests 50 Phosphate Tests 50 Nitrite/Nitrate Tests 50 Ammonium/Ammonia Tests Being able to make quick and precise water quality assessments is vital and Tropic Marin Compact Lab Essentials Test Kit includes the necessary test kits every professional reefer needs. Instructions: pH - Up to 100 Tests Shake the dropper bottle before use! Rinse out the glass cuvette with tap water and then several times with aquarium water. Fill the glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Add 1 drop of pH test reagent, close the glass cuvette using the stopper and briefly shake the solution. Place the glass cuvette on the white inner circles of the color card and compare it to the surrounding color fields. To do this, look into the open cuvette from above. Read off the measured pH value under the relevant color field. Rinse out the glass cuvette and the syringe thoroughly with tap water after the measurement process. Alkalinity/dKH - Up to 100 Tests Shake the dropper bottle before use! Rinse out the glass cuvette with tap water and then several times with aquarium water. Fill the glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Now add the KH test reagent drop by drop (shake the cuvette after each drop), until the color of the solution changes from TURQUOISE to PINK. The number of drops indicates the alkalinity of the solution in dKH, e.g. 8 drops = 8 dKH. To increase the accuracy of the measurement, a 10 ml water sample (instead of 5 ml) can be used. In that case, 1 drop corresponds to 0.5 dKH, i.e. 15 drops = 7.5 dKH. Rinse out the glass cuvette and the syringe thoroughly with tap water after the measurement process Phosphate/PO4 - Up to 50 Tests Shake the dropper bottles before use! Assemble and prepare the comparator. Rinse out both glass cuvettes with tap water and then several times with aquarium water. Fill each glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Put one of the two water samples aside as a reference. Add 10 drops (for saltwater) or 12 drops (for freshwater) of test reagent A to the test cuvette, close the glass cuvette using the stopper and briefly shake the sample. After that, add 4 drops of test reagent B, close the glass cuvette once again and briefly shake it. After 2 minutes of development time place the open test cuvette and the reference cuvette with the water sample into the comparator. Place the comparator on the color card in such a way that the reference cuvette is sitting on a colored field and the test cuvette on a white field. Now compare the opposing fields. To do this, look into the open cuvettes from above. Move the comparator on the color card until both cuvettes match exactly. Read off the phosphate concentration under the relevant color field. If the colors do not match exactly, an intermediate value can be estimated. Rinse out the glass cuvettes and the syringe thoroughly with tap water after the measurement process. Nitrite/Nitrate - Up to 50 Tests Determining the nitrite level: Shake the dropper bottles before use! Rinse out the glass cuvette with tap water and then several times with aquarium water. Fill the glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Add 5 drops of test reagent A, close the glass cuvette using the stopper and briefly shake the solution. Add 2 drops of test reagent C, close the glass cuvette once again and briefly shake it. After 3 minutes of development time, place the glass cuvette on the white circles of the nitrite color card and compare it to the opposing color fields by daylight conditions. To do this, look into the open cuvette from above. Move the sample on the color card until the cuvette and the color field match exactly. If the colors do not match exactly, an intermediate value can be estimated. Read off the measured nitrite value under the relevant color field. Determining the nitrate level: Shake the dropper bottles before use! Rinse out the glass cuvette with tap water and then several times with aquarium water. Fill the glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Add 10 drops of test reagent A, close the glass cuvette using the stopper and briefly shake the solution. Shake the bottle with test reagent B vigorously in a horizontal direction for approx. 30 seconds (the reagent must be well-shaken). Then add 10 drops of test reagent B, close the cuvette again, shake it briefly and set it aside. After 3 minutes of development time, add 4 drops of test reagent C, close the glass cuvette once again and briefly shake it. After another 3 minutes of development time, open the test cuvette and place it on the white circles of the nitrate color card and compare it to the opposing color fields by daylight conditions. To do this, look into the open cuvette from above. Move the sample on the color card until the cuvette and the color field match exactly. If the colors do not match exactly, an intermediate value can be estimated. Read off the measured nitrate value under the relevant color field. Correct the result if necessary. Rinse out the glass cuvette and the syringe thoroughly with tap water after the measurement process. Ammonia - Up to 50 Tests Determining the total concentration of ammonium/ammonia: Shake the dropper bottles before use! Rinse out the glass cuvette with tap water and then several times with aquarium water. Fill the glass cuvette with exactly 5 ml of aquarium water using the dosing syringe. Now add 10 drops of test reagent A to the water sample, close the glass cuvette using the stopper and briefly shake the solution. Then add 5 drops of test reagent B to the test cuvette; shake the glass cuvette briefly again and set it aside. After approx. 1 minute of development time, add 1 spoonful of test reagent C (powder), shake the glass cuvette briefly and then set it aside. After 5 minutes of development time, place the glass cuvette on the white inner circles of the color card and compare it to the surrounding color field. To do this, look into the open cuvette from above. Move the sample on the color card until the cuvette and the color field match exactly. A slight cloudiness in the salt water sample will not affect the result of the test. Take note of the measured total concentration value under the relevant color field. If the colors do not match exactly, an intermediate value can be estimated. Rinse out the glass cuvette and the measuring spoon thoroughly with tap water after the measurement process. What's Included? 2x Test Vials 1x Syringe 1x Measuring Spoon Individual Color Instructions 1x Reagent A Phosphate 1x Reagent B Phosphate 1x Reagent A NO2/NO3 1x Reagent B NO2/NO3 1x Reagent C NO2/NO3 1x Reagent A Ammonia 1x Reagent B Ammonia 1x Reagent C Ammonia 1x Reagent A Alkalinity 1x Reagent A pH
48.000 JD 45.000 JD
-
Polyplab غراء بوليبلاب الممتاز للقطع المتشابكة 4 غرام (عبوة واحدة)
Extra Thick Coral Frag Super Glue! Not all super glues are the same and Polyplab's Premium Coral Frag Glue is the perfect solution for larger frags and extended fragging sessions. The ultra-thick super glue gel has a bunch of uses, from regular fragging, aquascaping, or even placing entire colonies on rocks. The composition of the glue allows it to be workable for an extended period of time, allowing you to work with the coral for the perfect placement. If you need to work underwater, the tube design keeps water from being sucked back into the tube, keeping the glue within the tube from being compromised. Every tube comes with its own applicator stem, and initial use child protection ring. 8-hour working time Perfect for long fragging sessions Ultra-thick for large gaps and support Tube design leads to less waste Reacts and bonds in water within 5-15 seconds Made for use with freshwater or saltwater
2.000 JD
-
Salifert مجموعة اختبار درجة الحموضة من ساليفيرت
If the pH is too low then the cause may be a too low alkalinity and/or insufficient aeration. A low pH can be corrected by improving aeration and by increasing the alkalinity to NSW (Natural seawater) value or upto approx 25% above NSW levels. The Salifert pH test kit is sufficiently accurate to monitor pH fluctuations of approx 0.2 pH units. Our KH + pH Buffer allows fast and efficient correction of alkalinity. Approx. 50 tests per kit. Range pH 7.4 - 8.6. The pH value can have a major impact on the growth of corals and calcareous algae and on many biological processes. The pH should not be allowed to fluctuate more than approx. 0.3 units during 24 hours and should preferably be kept between 8.0 and 8.2.
15.000 JD 10.000 JD
-
Maxspect سدادات ماكسبيكت النانوية التقنية الحيوية (20 سدادة)
Frag Plugs with a Dual Purpose Extremely porous Stimulates coral growth Serves as bio-media Completely inert-- wont affect water chemistry Rapidly colonized by beneficial bacteria Stable ceramic base that will not decompose over time Maxspect's Nano-Tech Bio-Plugs are created using stabilized microbial sewage treatment technology with Biological Aerated Filter (W-BAF). This proprietary technology is formed into inert ceramic plugs which serve a dual function as both a coral frag base and a biological filtration media. Due to the extremely porous nature of each plug, water current is able to penetrate the Bio-Plug to reach the surface of the coral frag from all sides, allowing the coral to extract necessary nutrients from the water column with ease. Each plug also has an ultra-high surface area for colonization by beneficial bacteria strains that can work to lower nitrites, nitrates, and ammonia naturally. The bacterial colonies can also be captures by the coral frag polyps as an additional food source, increasing their growth rate.
7.000 JD
-
Flipper منظف الطحالب المغناطيسي 2 في 1 لأحواض السمك الزجاجية أو الأكريليكية - قياس عادي
نظّف، اقلب، واكشط الطحالب بسهولة مع Flipper Float المطوّر! يُعد Flipper Float الأداة المثالية للحفاظ على زجاج الحوض نظيفًا وخاليًا من الطحالب المزعجة. بفضل تصميم Flipper الحاصل على براءة اختراع، ستحصل على منظف مغناطيسي 2 في 1 يمكنه التحول بسرعة من ليفة تنظيف إلى كاشط بمجرد تدوير المقبض. يتميز بجهة داخلية منخفضة الارتفاع ومغناطيس نيوديميوم قوي، ما يتيح لك تنظيف حتى أصعب الطحالب دون الحاجة لإدخال يديك في الماء. المميزات: مناسب للأحواض متوسطة الحجم (زجاج أو أكريليك حتى سماكة 1/2 إنش) الجزء الداخلي (Wet Side) يطفو على السطح في حال انفصاله سطح مقبض محسّن وأكثر متانة وعمرًا أطول مغناطيس قوي من عناصر نادرة لتنظيف فعال حتى للطحالب الكلسية الصعبة جانب الكاشط يحتوي على 3 نقاط تماس فقط، مما يخلق فجوة 3 مم لتقليل احتمالية احتجاز الرمل ومنع الخدوش يتضمن شفرة من الستانلس ستيل مخصصة للأحواض الزجاجية يُنصح باستبدال الشفرات كل 3–6 أشهر للحفاظ على أفضل أداء المقاسات المتوفرة: Flipper Nano Float: للأحواض حتى سماكة 1/4 إنش Flipper Standard Float: للأحواض حتى سماكة 1/2 إنش Flipper Max Float: للأحواض حتى سماكة 1 إنش الأبعاد: الجزء الخارجي (Dry Side): 4 × 2 × 1 إنش الجزء الداخلي (Wet Side): 5 × 2.5 × 0.75 إنش الخلاصة:Flipper Float يجمع بين القوة والذكاء في التصميم، ليمنحك تنظيفًا سريعًا وآمنًا واحترافيًا دون عناء.
40.000 JD 38.000 JD
-
DVH ماصة تغذية DVH - 560 مم
The Easy Feed is an affordable multi use feeding and cleaning pipette.Due to its 3 parts, it is easy to take apart and easy to clean. With an inner diameter of 5mm, it is capable of dosing larger particles than most feeding pipettes on the market. The tip is made from food grade silicone rubber suitable for (reef) aquarium use. The end of the tip has an opening of 1mm. The inside of the tip is tapered which makes it easy to enlarge the hole by cutting a piece off for your personal needs. The ball is made from rubber with soft top control. The soft top control need to be operated from the top with your thumb. By using your thumb, you are able to control your dosing much better compared to standard balls which are operated by squeezing from the sides. Easy Feed is available in 385mm and 560mm length.
12.000 JD
-
D-D The Aquarium Solution دي-دي - إيبوكسي أكواسكيب (لون مرجاني)
Underwater bonding putty with a natural coralline algae color Two-part epoxy putty Specifically designed for underwater applications Suitable for freshwter and saltwater Ideal for bonding rocks for aquascapes, preparing coral frags, or cementing clam bases Also suitable for pipework, repairs, and bonding items to aquarium glass Dries to the color of coralline algae* *Please note: color is most true to natural coralline algae when cured underwater. Curing the epoxy outside of the water will result in a darker, deeper red color. D-D Aquascape Epoxy is a two-part putty designed for use in both freshwater and saltwater systems. It's ideal for bonding live rocks to create or solidify aquarium aquascapes, prepping and positioning coral frags, creating clam bases, or even reparing aquarium equipment or pipework and bonding items to aquarium glass. This putty has been developed to be stickier than competitor epoxies so that it can bond easier to wet substrates, making aquarium repairs a breeze. D-D Aquascape Epoxy can be cured either underwater or outside of the water; however, the coralline red algae color will take on a more natural color when cured underwater. Once fully cured, D-D Aquascape Epoxy can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted (if desired). It is heat resistant up to 130 degrees Celsius. Aquascape will bond to any of the following materials: wood, brick, cement, metals, concrete, rock, plastic, glass; making it an excellent general adhesive. Please note that it is not designed to be used as a thin layer bonding agent where a conventional glue is indicated. The epoxy will become semi-hard within 3-4 hours and fully cures hard as rock overnight. It is necessary to support heavy rocks, corals and overhangs until the putty sets. During use, take care not to overmanipulate underwater. If the aquarium water starts to become cloudy, stop using immediately and allow the water to clear.
13.000 JD
-
D-D The Aquarium Solution مقياس انكسار مياه البحر الحقيقي D-D
A refractometer truly made for sea water Calibrated specifically for the refractive index of natural sea water Accurate auto temperature compensation (ATC) Easy to read display The D-D True Seawater Refractometer is a handheld instrument for the measurement of the TRUE Salinity and Specific Gravity (S.G.) of sea water by refractive index. Almost all other handheld saltwater refractometers available to the hobby are designed and calibrated for the testing of brine solutions (i.e. sodium chloride) and are not calibrated for the refractive index of natural sea water. Even though the largest percentage of salt in the sea is sodium chloride, the presence of other significant ions such as magnesium and calcium in natural sea water results in a different refractive index relative to that of brine. A standard salt (brine) refractometer will therefore not give the correct salinity for natural sea water (NSW) and a conversion factor must be applied. After extensive development, D-D’s new ATC refractometer addresses this issue as the scale is calibrated for seawatergiving true salinity results for aquarium use when correctly calibrated and greater accuracy than previously attainable. Easier to Read One of the other problems with most refractometers is that the scale displayed normally reads from 0-100ppt when we are really only interested in the region from 30-40ppt. Our new Seawater Refractometer has therefore been specifically designed to read from 0-40ppt which gives you 2.5 times the resolution of a normal 0-100 scale. Auto Temperature Compensation (ATC) There is a lot of misunderstanding concerning the way the ATC feature works and its effect on the refractometer at different ambient room temperatures. Salinity is a measurement of a mass of salt in a mass of water and therefore does not vary with temperature however a refractometer does not measure salinity directly but measures the refractive index which is then displayed as salinity. The refractive index of a solution does vary with temperature therefore the reading that you measure with a refractometer is always temperature dependant. An ATC refractometer has a bimetal strip inside the instrument that moves the reading scale as the temperature changes to compensate for the change in refractive index. What people do not generally understand is that it is the temperature of the instrument and not the water temperature that is important as the small sample of water used for testing will equilibrate within seconds to the temperature of the refractometer. Once correctly calibrated at the set calibration temperature of 20oC the refractometer can then be used in environments where the ambient temperature and therefore instrument temperature would heat up or cool down within the range of the ATC which is between 10 and 30 centigrade. Calibration Calibration should always be carried out with the instrument at 20C, which is close to the average room temperature in most cases. Allow the refractometer to stand at this temperature for 30 minutes to equilibrate. The D-D refractometer is designed with a copper body which is more expensive to manufacture but responds faster to ambient temperature changes than other materials. Note that the refractive index is also dependant on the wavelength of light, therefore a light source closest to daylight should be used. D-D refractometers are calibrated at 20C and so the calculated specific gravity at 35ppt displays a reading of 1.0266. This is the equivalent to a specific gravity reading of 1.0264 for a water sample temperature of 25C using a standard hydrometer that has a calibration temperature of 77F or 25C.
55.000 JD
-
Flipper جهاز عرض أحواض السمك المغناطيسي فليبر ديب سي، 4 بوصات
Flipper DeepSee Clear 4" Magnified Viewer Optical Grade Magnifying Lens Held in Place by Strong Magnets Ideal for Disease and Pest Checks or Aquarium Photography Safe for Glass and Acrylic up to 5/8" (16mm) Thick Enhance your aquarium experience with the Flipper DeepSee Clear 4" Magnified Viewer. This top-quality optical grade magnifying lens provides a 4-inch viewing portal, perfect for capturing stunning aquarium photographs. With a focal range of approximately 3 to 8 inches, it allows you to examine every detail with crystal-clear precision. The DeepSee viewer is secured by strong magnets, making it suitable for tanks with a glass or acrylic thickness of up to 5/8" (16mm). This innovative design allows you to easily move the viewer around the tank, offering flexibility to view your aquarium from any location. This viewer allows you to easily check for early signs of disease or pests on your coral or fish, making it a versatile addition to your reefing toolkit. Too much blue light? An optional DeepSee Orange Filter Lens is available! (sold separately) What's Included? DeepSee Clear 4" Magnified Viewer
45.000 JD 41.000 JD
-
Flipper مكشطة يدوية فليبر بلاتينيوم لأحواض السمك الزجاجية أو الأكريليكية - 18 بوصة
لن تحتاج لشراء شفرات بديلة مرة أخرى! استخدم أي بطاقة قديمة مثل بطاقة ائتمان، بطاقة هدايا، مفتاح غرفة فندق وغيرها كشفرة تنظيف يمكنك قص البطاقات بأشكال مخصصة للوصول إلى الأماكن الصعبة تصميم حامل الشفرة يقبل إدخال البطاقات بأي اتجاه مقبض متين مصنوع من الألياف الزجاجية الصلبة يتضمن شفرة واحدة آمنة للاستخدام على الزجاج والأكريليك الطول: 18 إنش وصف المنتج:كاشطات Fl!pper Platinum اليدوية هي الأداة المثالية لمحبي التوفير وأعمال الـ DIY لإزالة الطحالب من زجاج الحوض. يتميز التصميم المبتكر (قيد براءة الاختراع) لحامل الشفرة بإمكانية تحويل أي بطاقة قديمة مثل بطاقات الهدايا أو الائتمان أو مفاتيح الفنادق إلى أداة فعالة لإزالة الطحالب. يمكنك إدخال البطاقات بأي زاوية، بل وحتى قصها بأشكال مخصصة للوصول إلى الأماكن الضيقة أو تنظيف الزجاج المنحني. خيارات التنظيف لا حدود لها! والأفضل من ذلك أنك لن تحتاج لشراء شفرات بديلة مرة أخرى. لا تملك بطاقات قديمة كافية؟ يأتي المنتج مع شفرة واحدة مناسبة للاستخدام على الأحواض الزجاجية أو الأكريليك. كما يمكن شراء شفرات إضافية بشكل منفصل حسب الحاجة: شفرات من الستانلس ستيل لإزالة الطحالب الصعبة في الأحواض الزجاجية شفرات بلاستيكية مناسبة للأحواض الزجاجية والأكريليك
27.000 JD
-
Fauna Marin فاونا مارين ريد إكس سبيشال - 250 مل
RED X is a special formula that prevents algae growth in the aquarium. Red X safely treats unwanted algae in a biological / organic way and is very gentle to aquarium inhabitants. When used correctly at the intended dosage, RED X is 100% safe to use and harmless to corals, fish, and invertebrates. RED X is effective against: Green and red cyanobacteria Mild dinoflagellate infestation (Ostreopsis sp., Amphidinium sp., Prorocentrum sp., Coolia sp., Symbiodinium and others) Gold and armor algae Diatoms Dosage: Add 10ml per 100 liters (26 US gal) daily for 6 days, then wait for an additional 5 days for full effects to occur. During treatment period, DO NOT do water changes. Do not use any carbon, PO4 removers, Adsorbers, Ozone or UV. After 11 days, you may resume normal aquarium care. After Red X treatment, we recommend dosing Fauna Marin REBIOTIC to repair and maintain a healthy biological balance in the aquarium. By adding Rebiotic, you can effectively prevent unwanted coverings from coming back. Ingredients:Water, sodium chloride, salicylic acid Safety note:RED X is intended for use in Saltwater aquariums only. Keep away from children, not for human consumption.ATTENTION CORROSIVE! Use biocidal products with care. Always label containers and read product information before use. BAuA Reg.No.: N-77208 H 413: May be harmful to aquatic life with long-term effect. Contains no antibiotics or prescription medicine!
35.000 JD 29.000 JD
-
Eheim سخان حوض السمك إيهيم - ثيرموكونترول-إي 300 وات
With the EHEIM thermocontrol-e heating element your fish get the right temperature even more precisely - in every aquarium. The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the meantime the EHEIM controller heater has become an ultra-modern thermal device. The temperature can be set precisely and is measured even more precisely and kept more constant by the electronics. The coating made of special laboratory glass increases the heating surface, serves as a heat shield and ensures even heat emission. And whether you want to heat a 20 or 1200 litres aquarium - you can choose from 10 sizes.Advantages of the EHEIM control heater thermocontrol-e Precise temperature adjustment from 20 to 32 °C No readjustment necessary Control accuracy ± 0.5 °C The heat is kept constant Control lamp indicates the heating function (red: heating up; green: temperature reached) Fully submersible (waterproof) With dry-running protection (Thermo Safety Control) Glass coating increases the heating surface and ensures optimum, even heat output Convenient cable length approx. 170 cm Including double suction holder 10 sizes for aquariums from 20 to 1200 litres Suitable for fresh and marine water Highest safety and reliability - 3 years warranty Precision, comfort, quality and safety.As you know, fish from tropical and subtropical waters need a certain constant water temperature. Before the engineer Eugen Jäger invented the aquarium heater decades ago, there was no really satisfactory solution to produce the appropriate water temperature. They dealt with complicated and sometimes curious methods. Some put the aquarium in the sun or by the heater or stove.The EHEIM thermocontrol aquarium control heater is a further development of the legendary heating element and thermocontrol-e is the latest electronically controlled variant.The temperature can be precisely adjusted from 20 to 32 °C. The control accuracy is ± 0.5 °C.The heat is kept constant. A control lamp indicates the heating function.The heater is absolutely waterproof, can be fully immersed, has a dry run protection (Thermo Safety Control) and is suitable for fresh and marine water. One of the most important innovations is the glass coating: • It increases the heating surface,• compresses the heat, ensures optimum, uniform heat output and• forms a heat shield (the aquarium inhabitants do not mind touching it).The coating is made of special laboratory glass. This was created for research purposes. It is therefore free of pollutants that could be released into the water. Chemical and biological substances do not attack it. There are no cracks and hairline cracks through which condensation water could pass. It is impact resistant. And even extreme temperature fluctuations, such as those that may occur during water changes, do not affect this glass. Dimensions in Ø: 36 mm For aquariums of about.: 600l For aquariums up to approx.: 1000l Freshwater: Yes Height: 496 Manufacturer guarantee: 3 Year(s) Max. temperature: 32 Min. temperature: 20 Packing: 6 Part (s) Performance at 50 Hz: 300 Watt Sea water: Yes
50.000 JD 43.000 JD
-
Other مقياس الانكسار الأساسي
The Refractometer is specifically designed for use in saltwater aquariums and delivers consistent, reliable measurements. Thanks to automatic temperature compensation (ATC), you do not need to account for temperature fluctuations, which improves accuracy. Advantages: Accurately measure the salt content or specific gravity Equipped with automatic temperature compensation (ATC) Easy to read through a clear viewing window Made of durable, corrosion-resistant materials Includes calibration fluid and storage case
37.000 JD
-
Two Little Fishies مفاعل فوسفان GFO من نوع Two Little Fishies رقم 150
The PhosBan Reactor 150 is designed to push water upwards from the bottom and through the media. This forces an even distribution of water throughout the media and prevents channeling from occurring. This is also great for fluidizing media such as GFO where the filter media needs to tumble gently and evenly. The PhosBan 150 media reactor has a low profile and built-in hanging bracket making it ideal for "hang on the back" applications. The Phosban reactor works with a variety of filter medias such as activated carbon, GFO, and biopellets. Great for HOB applications Includes ball valve Works great with Phosban Media Requires feed pump The PhosBan 150 can be mounted under the aquarium or hung on the back of the aquarium. It comes with barb hose fittings for 1/2" tubing and a 1/2" barbed ball valve included for flow control. The Phosban 150 is compatible with any pump that uses 1/2" tubing and a flow rate between 100 and 250gph. Specifications: Max Media Capacity - 200 grams Inlet Tube - 1/2" Outlet Tube - 1/2" Max Flow Rate - 250 gph Dimensions - 14.25" H x 3.0" W x 4.0" L Distance required behind tank for HOB application - 4.0" min What's Included? Phosban 150 body Phosban 150 Lid Ratchet Clip Sponges (2x) Dispersion Plate Ball Valve 2" Tube 9" Tube
55.000 JD
-
IceCap حامل تجزئة مغناطيسي احترافي (متوسط، 23 فتحة) - آيس كاب
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems. The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals. Available in 3 models.
54.000 JD 48.000 JD
-
Tropic Marin تروبيك مارين ريف أكتيف 60 جرام
Tropic Marin Reef Actif – تغذية للبكتيريا (Nutrition for Bacteria) يُعتبر Reef Actif من شركة Tropic Marin خليطًا من مواد عضوية طبيعية (Biopolymers) مصمم لدعم النظام البيولوجي في أحواض المياه المالحة وتحسين جودة المياه بشكل مستمر بين تغييرات الماء. يعمل المنتج على ربط المواد العضوية الزائدة والملوثات في الماء، مما يسهل على الكائنات الدقيقة البحرية المتخصصة تحليلها وتفكيكها. هذا يؤدي إلى تعزيز الميكروبيوم الطبيعي داخل الحوض والحفاظ على ماء شديد الصفاء. الفوائد الرئيسية: يحافظ على استقرار جودة المياه بين تغييرات الماء يساعد على تقليل الملوثات العضوية عن طريق ربطها وتسهيل تحليلها يحسن كفاءة واستمرارية عملية الـ Skimming (الفرّاز البروتيني) يعزز النشاط البكتيري الطبيعي داخل الحوض يدعم توازن النظام الحيوي البحري (Microbiology) يساهم في إظهار ألوان المرجان بشكل أوضح وأكثر حيوية يدعم صحة الأسماك ويعزز نشاطها ومظهرها الطبيعي يضيف فيتامينات ومركبات حيوية بشكل طبيعي عبر تنشيط الميكروفلورا طريقة الاستخدام: إضافة ملعقة قياس واحدة لكل 500 لتر من ماء الحوض أسبوعيًا يُفضل خلط الجرعة أولاً في كوب من ماء الحوض ثم إضافتها لتوزيع أفضل الحد الأقصى: 3 مرات أسبوعيًا (ملعقة لكل 500 لتر) ملاحظات مهمة: يمكن استخدامه مع باقي منتجات نظام Tropic Marin Bio-Actif لا يوجد خطر من زيادة الجرعة في المواد العضوية ضمن الاستخدام الطبيعي يساعد بشكل غير مباشر على تحسين صفاء الماء واستقرار النظام الحيوي
15.000 JD
-
Tropic Marin تروبيك مارين ريف سنو 60 غرام
Product description The high level of biological activity prevalent in intact coral reefs means that high concentrations of biopolymer substances can be found there. Contact with nutrient particles and colonisation with specific bacteria lead to the formation of particles that have a heightened level of nutritional value and are even visible to the naked eye. These flaky and filamentous particles are referred to as reef snow. Tropic Marin® Reef Snow contains these natural marine biopolymers. Together with other feedstuffs, they form nutrient-rich flakes that resemble natural reef snow which are then passed on to the corals and other filter feeders. The concentration of a Tropic Marin® Reef Snow solution can be varied in order to adapt the size of the flakes to suit the filter feeders contained in the tank. Benefits natural source of nutrients for corals and other filter feeders increases the filterability of the particles for many corals and filter feeders improves nutrient utilisation lowers the nutrient content of the water variable flake size larger particles constitute healthy feed with a prebiotic effect for fish ideal for binding vitamins and other feed enrichments Ingredients algae, alga extract Application & Dosage Stir approx. 1.5 measuring spoons of Tropic Marin® Reef Snow into 100 ml of reverse osmosis water and allow it to soak for one to two hours, stirring occasionally. Next, stir in the feed or the plankton substitute and allow it to soak for another 30 minutes before dispersing it throughout the aquarium. A prepared Tropic Marin® Reef Snow stock solution (without feed/plankton substitute) can be stored for two weeks at room temperature. The size of the Tropic Marin® Reef Snow particles formed can be altered by varying the dosage from 1 to 2 measuring spoons per 100 ml.
15.000 JD 13.000 JD
تم عرض 120 من اصل 437 منتج