الأدوية

Salifert Flatworm Exit works on reef aquariums that have flatworm issues.  Flatworms can consume corals and are usually found when new corals are introduced to the tank.  When using Flatworm Exit it is necessary to follow the directions, as flatworms can produce a toxin in your aquarium after the treatment.  Multiple treatments may be necessary as well.  Salifert Flatworm Exit treats up to 300 gallons (1200 L) of water.

يقرأ أكثر أقل

With a balanced combination fo 40 % Aloe vera together with iodine and vitamin C, AQUAVITAL STRESS-PROTECT strengthens the immune system of ornamental fish making them more resistant to pathogens and promoting healing of wounds.

يقرأ أكثر أقل

Methylene Blue is effective against superficial fungal infections of fish. The drug may be used as an alternative to Malachite Green for the control of fungus when it is known that the fish to be treated are sensitive. Methylene Blue is safe for use with fish eggs and fry for the prevention of fungal infections. As a secondary use, it is effective against some external protozoans, such as Ichthyophthirius (Ich), Chilodonella and Costia.   The properties of the drug as an oxygen transporter (it converts methemoglobin to the normal oxygen carrying component of fish blood, hemoglobin) allow it to be used in the treatment of known cyanide and nitrite poisoning of aquarium fishes. It has been suggested that newly arrived marine fish placed in Methylene Blue can have their survival rate increased as Methylene Blue aids in the reversal of nitrite and/or cyanide poisoning. The therapeutic action of Methylene Blue on bacteria and other parasites is probably due to its binding with cytoplasmic structures within the cell and also its interference with oxidation reduction processes. Treats fungal infections on fertile fish eggs Treats superficial fungal infections of fish For fresh and saltwater Made in U.S.A. SAFE TO USE WITH FRY

يقرأ أكثر أقل

Aquarium Münster Ektomor is a treatment against infections of ornamental fish in freshwater and seawater with Protozoa (e.g. Ichthyobodo (formerly Costia), Chilodonella, Ichthyophthirius), Bacteria (e.g. Columnaris) and Fungus (e.g. Saprolegnia). Especially in cases of an unsecure diagnosis ektomor has a powerful effectiveness against most infections that may be shown through the following symptoms: White-yellowish velvet-like coatings, cottonwool-like coatings, ulcers, wounds, inflammations, bloody spots, loss of skin and scales, raised scales, fin rot, clouded mucous memrane, white mouths, staggering, popeye (Exophthalmus), swollen abdomen. The special combination of active ingredients in Aquarium Münster Ektomor results in a mild and long lasting splitting off of oxygen, rendering it particularly tolerable. It is used for the treatment of ornamental fish in marine and fresh water as well as for invertebrates and for prevention of fungal infections of spawn and for disinfection of new fish, aquatic plants (also to prevent snail infestation), decorations, etc. Dosage and application of Aquarium Münster Ektomor:1. Long-term bath treatment:Allow 20 g of ektomor for every 100 l of aquarium water, dissolve it in a little aquarium water before adding it to the aquarium and then stir to distribute it evenly in the aquarium. 2. Short-term bath treatment:Dissolve 10 g of ektomor in 5 l of aquarium water and leave the fish to bathe in this solution for 3 hours. Provide adequate ventilation during the treatment and keep the fish under close observation. Stop the treatment if there are signs of intolerance. 3. Disinfection bath:A disinfection bath is advisable as a precautionary measure for newly acquired ornamental fish and for newly acquired aquatic plants and decorative objects, etc. Dissolve 10 g of ektomor in 5 l of aquarium water and leave the fish, plants or decorative objects to bathe in this solution for 30 minutes. 4. Regular preventive action:As a regular weekly precaution to prevent the spread of germs and pathogens, take 10 g of ektomor for every 100 l of aquarium water, dissolve it in a little aquarium water before adding it to the aquarium and then stir to distribute it evenly in the aquarium.

يقرأ أكثر أقل

Aquarium Münster Dessamor has been formulated for the treatment of fungal infections (Saprolegnia, Achlya) and accompanying bacterial infections of tropical fish. The visible signs of fungal infection are cotton-wool-like patches. Lower organisms (invertebrates) such as anemones, snails and shellfish will not tolerate treatment with dessamor. Active substances: 1 ml dessamor contains: 10.00 mg copper sulphate, 4.00 mg ethacridine lactate, 2.75 mg tetramethylthionin chloride, 2.00 mg acriflavine chloride. Dosage and application of Aquarium Münster Dessamor:Day 1: Add 60 drops (3 ml) of dessamor to the aquarium for each 100 l of water and stir to distribute. Do not feed the fi sh. Remove the fi lter from the aquarium and place it over a separate container to continue running in order to keep the microorganisms in the fi lter. Oxygenate the aquarium water. If the water cannot be oxygenated without operating the fi lter then we recommend running the fi lter without fi ltration media in order to ensure suffi cient water circulation. In this case keep the fi ltration media cool in a container with aquarium water. Day 2: Add 20 drops (1.5 ml) of dessamor to the aquarium for each 100 l of water and stir to distribute. Do not feed the fi sh. Day 3: Do not add any medication to the water. Feed the fi sh as normal. Put the fi lter back into operation. If the fi ltration media has been stored separately then the water must not be put back in the aquarium. In this case partially wash the fi ltration media out with lukewarm water - but not too thoroughly in order to retain some of the microorganisms. Day 4 - 6: Do not add any medication to the water. Feed the fi sh as normal. Day 7: Follow the instructions for Day 1. Day 8: Do not add any medication to the water. Feed the fi sh as normal. Change approx. 30% of the aquarium water. Put the fi lter back into operation. If the fi ltration mediahas been stored separately then the water must not be put back in the aquarium. In this case partially wash the fi ltration media out with lukewarm water - but not too thoroughly in order to retain some of the microorganisms. the following bottle sizes are available:20 ml for 400 l of water100 ml for 2,000 l of water1000 ml for 20,000 l water

يقرأ أكثر أقل

Aquarium Münster Protomor is a treatment against protozoa. Visible symptoms include pale grey to dark, velvet-like films or barely visible spots which, during subsequent stages, spread to the gills fins and the entire body. The gills remain open and the fish exhibits increased respiratory activity which can reach levels of acute respiratory distress. Aquarium Münster Protomor is a specialized treatment for ornamental fish against velvet diseases such as Oodinium ocellatum (coral fish disease), Cryptobia, Brooklynella, Trichodina and Cryptocaryon. Protomor is used especially for the initial stage of infections and slight diseases. It is tolerable for invertebrates like corals, anemones, snails, mussels. Available are the following contents:- 20 ml solution for 400 l of water- 100 ml solution for 2,000 l of water- 1000 ml solution for 20,000 l of water

يقرأ أكثر أقل

Aquarium Münster Faunamor as a liquid remedy has been an approved medicine for decades, for fast and efficient help against Ichthyophthirius (White Spot). The Ichthyophthirius parasite is found under the mucous membrane of the fish. After a few days it breaks through the mucous membrane and falls to the bottom of the aquarium, onto the plants and stones where it then seperates into 1,000 to 2,000 cells (swarm). This swarm then sheds its skin and looks for a new base (in this case the fish). They pierce the skin and form small white balls. Aquarium Münster faunamor prevents the swarming of the spawn and stops the development cycle of the Ichthyophthirius pathogene. Not only does it fight the illness, but it also protects against the frequently occurring accompanying bacterial infections. The treatment should last about 8 days until the swarm is dead. Aquarium Münster faunamor brings fast help. The specific combination of active ingredients prevents the Ichthyophthirius parasite from multiplying in the aquarium water. In this way, faunamor interrupts the disease's development cycle, successfully fighting Ichthyophthirius and providing reliable protection against potential associated bacterial infections. Dosage an application of Aquarium Münster Faunamor:Day 1: Add 20 drops (1 ml) of faunamor to the aquarium for each 100 l of water and stir to distribute. In severe cases the dose can be doubled as long as there are no extremely delicate ornamental fish in the aquarium (e.g. catfish). Do not feed the fish. Remove the filter from the aquarium and place it over a separate container to continue running in order to keep the microorganisms in the filter. Oxygenate the aquarium water. If the water cannot be oxygenated without operating the filter then we recommend running the filter without filtration media in order to ensure sufficient water circulation. In this case keep the filtration media cool in a container with aquarium water. Day 2: Add 20 drops (1 ml) of faunamor to the aquarium for each 100 l of water and stir to distribute. Do not feed the fish. Day 3: Do not add any medication to the water. Feed the fish as normal. Put the filter back into operation. If the filtration media has been stored separately then the water must not be put back in the aquarium. In this case partially wash the filtration media out with lukewarm water (not too thoroughly in order to retain some of the microorganisms). Days 4 - 6: Do not add any medication to the water. Feed the fish as normal. Day 7: Follow the instructions for Day 1. Day 8: Do not add any medication to the water. Feed the fish as normal. Change approx. 30 % of the aquarium water. Put the filter back into operation. If the filtration media has been stored separately then the water must not be put back in the aquarium. In this case partially wash the filtration media out with lukewarm water (not too thoroughly in order to retain some of the microorganisms Available are the following contents:- 20 ml solution for 600 l of water- 100 ml solution for 3,000 l of water- 1000 ml solution for 30,000 l of water

يقرأ أكثر أقل

API General Cure is a medication that treats a wide variety of parasitic diseases including velvet, anchor worm, fish lice, hole-in-the-head disease (Hexamita spp. & Spironucleus spp.), and gill & skin flukes (Dactylogyrus spp. & Gyrodactylus spp.). It can be used in both freshwater and saltwater aquariums. Features Treats a wide variety of parasitic diseases Safe for use in both freshwater and saltwater aquariums Treats up to 100 gallons (10 gallons per packet) Fast acting   Directions Empty one packet directly into the aquarium for each 10 gallons of water Repeat dose after 48 hours Wait another 48 hours then change 25% of the aquarium water and add fresh activated carbon or replace filter cartridge

يقرأ أكثر أقل

PI Furan-2 powder is a strong antimicrobial compound for use in both freshwater and saltwater systems.  Features Combats a wide variety of gram-positive & gram-negative bacterial diseases Treats bacterial gill disease, open red sores (Aeromonas spp.), body slime & eye cloud, black molly disease (Flavobacterium columnaris) and fin & tail rot For use in both freshwater and saltwater aquariums Includes 10 packets to treat up to 100 gallons of water   Directions: Empty one packet directly into aquarium for each 10 gallons of water Repeat dose after 24 hours Change 25% of the aquarium water 24 hours after second dose Repeat treatment for a second time, for a total of 4 doses, followed by a final 25% water change Add fresh activated carbon or replace filter cartridge after treatment Note: This medication will cause a slight discoloration of water which can be removed with activated carbon.

يقرأ أكثر أقل

Thanks to its special formulation, Copper Power is one of the safest and yet most effective copper solutions for treatment of external parasites, such as ich and velvet. Copper Power contains a very stable form of copper medication with low levels of precipitation, and thanks to this it is able to be maintained at higher concentrations of up to 2.5 ppm copper, which is nearly five times the normal toxic level in saltwater. This allows for higher copper concentrations than some medications and more effective treatment protocols, and Copper Power has become the copper treatment of choice for many in the hobby.  Features Highly effective against external parasites such as ich & velvet Super low rate of precipitation of 0.01 mg/1/24 hr- won’t clog fish gills Very stable in saltwater and much less toxic form of copper Will not be removed by carbon filtration & will not cloud the water Because of Copper Power’s extremely low rate of precipitation, it does not have to be constantly reapplied in order to be effective. One application of Copper Power remains at an active level in the water for months. Copper Power is also a very consistent solution, providing accurate and reliable dosing concentrations. Always Test We Recommend the Hanna High Range Copper Checker (HI702) Whenever treating with copper, we recommend regular testing of copper concentrations to ensure safe and effective treatment. One of the best tools for this is the Hanna Copper Checker. This handheld colorimeter is well worth the cost and allows for precise and highly accurate measurement of copper concentration in your quarantine tank. The copper reading is provided on the digital display with no guessing or color charts to compare.  When using a medication like copper, there can often be a fine line between the helpful, therapeutic dose and a lethal dose. Don't guesstimate. We recommend using precise, graduated dosing syringes when measuring out copper medication.   Recommended Treatment It is not necessary to treat at the maximum 2.5 ppm concentration, but a mimimum level of 1.5 ppm copper must be maintained to be effective. We recommend a starting range of 1.5 to 2.0 ppm copper for most treatment protocols, based on community experiences with copper treatment. For the safest and least stressful treatment, we recommend slowly raising copper levels over the course of several days.  1.475 mL per gallon = 2.5 ppm 1.18 mL per gallon = 2.0 ppm .89 mL per gallon = 1.5 ppm   Take your total copper dose required for the system volume, and divide this dose into several smaller doses, applied over the course of a week, in order to reach the desired concentration.

يقرأ أكثر أقل