Pre Order

Q6 Commercial Protein Skimmer Great for commercial systems: 6,500-10,000 gallons The Q6 is a commercial-size foam fractionator that is extremely efficient at removing dissolved organics and pollutants from seawater. Utilizing a group of 3 Bubble Blaster 10000 pinwheel pumps that efficiently chops and injects a mass amount of microbubbles into its 24in diameter body where it mixes in with approximately 70 gallons of water. The dissolved organics and pollutants are attracted to the microbubbles and rise into a waste collection cup. These foam fractionators are compatible with ozone with direct venturi ports installed for added safety. Foam collection cups remove easily for maintenance. Applications include aquaculture recirculating systems, commercial displays, large aquaculture facilities, aquarium/ zoological exhibits, mammal exhibits, seafood-holding systems, ornamental ponds, and shrimp systems. The Power The quiet yet powerful Reef Octopus Bubble Blaster HY-10000 is a super-efficient pinwheel skimmer pump that comes backed by a 2 year warranty. Our Bubble Blaster skimmer pumps are a true innovation to the aquarium hobby. Equipped with a calcium inhibiting silicone nitride shaft and bearings our Bubble Blaster skimmer pumps the increasing life of the pump and decreasing maintenance. While all other skimmer pumps on the market are modified water pumps from a water pump manufacturer the Bubble Blaster pumps were designed and built to be a skimmer pump! Enhanced with a digital control circuit board that controls the pumps' directional start-up and RPM speeds. This smart circuit board will shut the pump off if it detects a problem. Another unique feature is the clear volute housing which allows you to see inside the pump without having to take it apart allowing you to see if something is stuck inside the volute housing or pinwheel. The key feature of the Bubble Blaster pumps is the enormous amount of air they pull per watt. Air and water volume is the key to aggressive protein skimming and there is no other pump on the market that compares.   Bioload Handling The bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system. (EXCLUDING SUMP) Heavy Medium Light 6,500 gallons 8,000 gallons 10,000 gallons   Features Super Efficient Filtration High-Performance Recirculating pinwheel pumps with Max injection Venturi System Refined Hybrid (half cone) Skimmer Body for Greater Foamate Stabilization & Collection Over-Sized Collection Cup with Neck Cleaner and Drain Ozone Injection Port(s) Precision Water Level Control Output Valve Solid Acrylic Construction Service Drains   The Skimmer Hybrid body skimmers have been a huge hit amongst budget-wise professionals and hobbyists due to the ideal conical transition from the body to the neck. This reduces turbulence, directs the flow gently up to the neck, and reduces head pressure off of the re-circulation pump providing enhanced performance.   Terms of purchase This skimmer requires 8-10 week lead time and a 50% deposit upfront to begin the building of the skimmer. Skimmers can only ship by freight and are required to cover the cost of shipping. We can ship directly to the job site if desired.   Technical Specs Body Size: 24inFootprint: 37.5in x 37inTotal Height:69in Collection Cup Diameter:17.7inCollection Cup Volume:6galNeck Size: 10in Main Chamber Volume: 70gal Output Size: 90mm \ 3in PVCOutput Height: 12.24inFeed Inlet Size: (x1) 1.5in, (x1) 2inRetention Time: 1.5min   Note: Suggested Feed Rate of 2700-3500GPH Recommended feed pump: x1-Reef Octopus Water Blaster 10,000   Pump Information X3 -Reef Octopus Bubble Blaster HY-10000sPinwheel PumpVoltage: 220v/50HzTotal Wattage: 375wTotal Air draw: 13627 L/H (476 SCFH)Total GPH: 2,610 - Efficiency: 95%*Air and water results will vary depending on aquarium setup   Neck Cleaner Power: 15wattType: Twin Blade   Warranty 2 Year on Pump Body 2 Year Pump Rotor 1 Year on Skimmer Body Reef Octopus can not be responsible for consequential damages arising from the installation or use of this product. Reef Octopus warrants the pump to be free from defects in material and workmanship under normal use and conditions for the warranty period from the date of purchase. ReefAmorous liability under this warranty shall be limited to repairing or replacing at ReefAmorous’s discretion, without charge. ReefAmorous will not be liable for any cost of removal, installation, transportation, or any other charges which may arise in a warranty claim. *Reef Octopus reserves the right to change/modify this product without notice.

Read more less

Commercial Protein Skimmer Great for commercial systems: 20,000-26,500 gallons The Q8 is a commercial-size foam fractionators that is extremely efficient at removing dissolved organics and pollutants from sea water. Utilizing a group of six Bubble Blaster 10000 pinwheel pumps that efficiently chops and injects a mass amount of microbubbles into its 40in diameter body where it mixes in with approximately 250gallons of water. The dissolved organics and pollutants are attracted to the microbubbles and rise into a waste collection cup. These foam fractionators are compatible with ozone with direct venturi ports installed for added safety. Foam collection cups remove easy for maintenance. Bioload Handling The bioload of an aquarium refers to its ability to process waste in proportion to tank volume. Protein skimmers work best when properly matched with the bioload of the system. (EXCLUDING SUMP) Heavy Medium Light 20000 gallons 24500 gallons 26500 gallons Features Super Efficient Filtration High-Performance Recirculating pinwheel pumps with Max injection Venturi System Refined Hybrid (half cone) Skimmer Body for Greater Foamate Stabilization & Collection Over-Sized Collection Cup with Neck Cleaner and Drain Ozone Injection Port(s) Precision Water Level Control Output Valve Solid Acrylic Construction Service Drains Applications include aquaculture recirculating systems, commercial displays, large aquaculture facilities, aquarium/ zoological exhibits, mammal exhibits, seafood-holding systems, ornamental ponds, and shrimp systems. The Power The quiet yet powerful Reef Octopus Bubble Blaster HY-10000 is a super-efficient pinwheel skimmer pump that comes backed by a 2-year warranty. Our Bubble Blaster skimmer pumps are a true innovation to the aquarium hobby. Equipped with a calcium inhibiting silicone nitride shaft and bearings our Bubble Blaster skimmer pumps the increasing life of the pump and decreasing maintenance. While all other skimmer pumps on the market are modified water pumps from a water pump manufacturer the Bubble Blaster pumps were designed and built to be a skimmer pump! Enhanced with a digital control circuit board that controls the pumps' directional start-up and RPM speeds. This smart circuit board will shut the pump off if it detects a problem. Another unique feature is the clear volute housing which allows you to see inside the pump without having to take it apart allowing you to see if something is stuck inside the volute housing or pinwheel. The key feature of the Bubble Blaster pumps is the enormous amount of air they pull per watt. Air and water volume is the key to aggressive protein skimming and there is no other pump on the market that compares. The Skimmer Hybrid body skimmers have been a huge hit amongst budget-wise professionals and hobbyists due to the ideal conical transition from the body to the neck. This reduces turbulence, directs the flow gently up to the neck, and reduces head pressure off of the re-circulation pump providing enhanced performance. Terms of purchase This skimmer requires 8-10 week lead time and a 50% deposit upfront to begin the building of the skimmer. Skimmers can only ship by freight and are required to cover the cost of shipping. We can ship directly to the job site if desired. Technical Specs Body Size: 40inFootprint: 60in x 50inTotal Height:85in Collection Cup Diameter:23.6inCollection Cup Volume:14.5galNeck Size: 14in Main Chamber Volume: 250gal Output Size x2: 90mm \ 3in PVCOutput Height: 12.24inFeed Inlet Size :(x3) 1.5in (x3) 2inRetention Time: 1.5min Note: Suggested Feed Rate of 9300-12000GPH Recommended feed pump: x3-Reef Octopus Water Blaster 12,500 Pump Information x6 - Reef Octopus Bubble Blaster HY-10000sPinwheel PumpVoltage: 220v/50HzTotal Wattage: 1290wTotal Air draw: 24000 L/H (840 SCFH)Total GPH: 5200 - Efficiency: 95%*Air and water results will vary depending on aquarium setup Neck Cleaner Power: 15wattType: Twin Blade

Read more less

Q7 Commercial Protein Skimmer Great for commercial systems: 12,500-18,000 gallons The Q7 is a commercial-size foam fractionators that is extremely efficient at removing dissolved organics and pollutants from sea water. Utilizing a group of 4 Bubble Blaster 10000 pinwheel pumps that efficiently chops and injects a mass amount of microbubbles into its 31.5in diameter body where it mixes in with approximately 130 gallons of water. The dissolved organics and pollutants are attracted to the microbubbles and rise into a waste collection cup. These foam fractionators are compatible with ozone with direct venturi ports installed for added safety. Foam collection cups remove easy for maintenance. Applications include aquaculture recirculating systems, commercial displays, large aquaculture facilities, aquarium/ zoological exhibits, mammal exhibits, seafood-holding systems, ornamental ponds and shrimp systems. The Power The quiet yet powerful Reef Octopus Bubble Blaster HY-10000 is a super efficient pinwheel skimmer pump that comes backed by a 2 year warranty. Our Bubble Blaster skimmer pumps are a true innovation to the aquarium hobby. Equipped with a calcium inhibiting silicone nitride shaft and bearings our Bubble Blaster skimmer pumps increasing life of the pump and decreasing maintenance. While all other skimmer pumps on the market are modified water pumps from a water pump manufacturer the Bubble Blaster pumps were designed and built to be a skimmer pump! Enhanced with a digital control circuit board that controls the pumps directional start-up and RPM speeds. This smart circuit board will shut the pump off if it detects a problem. Another unique feature is the clear volute housing which allows you to see inside the pump without having to take it apart allowing you to see if something is stuck inside the volute housing or pinwheel. The key feature of the Bubble Blaster pumps is the enormous amount of air they pull per watt. Air and water volume is the key to aggressive protein skimming and there is no other pump on the market that compares. The Skimmer Hybrid body skimmers have been a huge hit amongst budget wise professionals and hobbyists due to the ideal conical transition from the body to the neck. This reduces turbulence, directs the flow gently up to the neck and reduces head pressure off of the re-circulation pump providing enhanced performance. Terms of purchase This skimmer requires 8-10 week lead time and a 50% deposit up front to begin the building of the skimmer. Skimmers can only ship by freightand are required to cover the cost of shipping. We can ship directly to the job site if desired. Technical Specs Body Size: 31.5inFootprint: 53.2in x 41.5inTotal Height:75in Collection Cup Diameter:23.6inCollection Cup Volume:14.5galNeck Size: 14in Main Chamber Volume: 130gal Output Size: 90mm \ 3in PVCOutput Height: 12.24inFeed Inlet Size: (x2) 1.5in (x1) 2inRetention Time: 1.5min Note: Suggested Feed Rate of 5280-8000GPH Recommended feed pump:x2-Reef Octopus Water Blaster 10,000 Pump Information X4 - Reef Octopus Bubble Blaster HY-10000sPinwheel PumpVoltage: 220v/50HzTotal Wattage: 500wTotal Air draw: 18170 L/H (635 SCFH)Total GPH: 3480 - Efficiency: 95%*Air and water results will vary depending on aquarium setup Neck Cleaner Power: 15wattType: Twin Blade

Read more less

Commercial Calcium Reactor The Reef Octopus 350PRO Commercial Calcium Reactor is developed specifically for the needs of the commercial sector including public aquariums, fish farms, and aquaculture centers up to 4,000 US Gallons.  High-performance reverse flow design, superior craftsmanship, and efficient recirculation pump2-year pump warranty are just a few of the features of the Super Reef Octopus calcium reactors.  Our Commercial Calcium Reactors come with our very own high water volume Water Blaster pumps which come standard with Silicone Carbide shafts and bearings, this means no worries of moving parts freezing up causing broken shafts. Equipped with a pH probe holder to monitor PH inside the first chamber of the reactor and built-in bubble counters to monitor Co2 drip rates. to help you meet the challenging task of maintaining alkalinity, calcium, and trace elements, consider adding a Super Reef Octopus calcium reactor to your aquarium system.  Equipped with the dependable and super-efficient Water Blaster 12500W recirculation pump, and features independent flow valves so the user can independently control the flow of media within the reactor.   Technical Specs: Footprint: 24 x 11.5in | Body Diameter: Ф14in | Height: 52in Recirculation Pump: Water Blaster 12500 | Wattage: 175wMedia Capacity: 70L (18.5Gal)* | Required Feed Pump: 600-1000gph (Suggested pump: WaterBlaster 3000)

Read more less

Commercial Calcium Reactor The Reef Octopus 300PRO Commercial Calcium Reactor is developed specifically for the needs of the commercial sector including public aquariums, fish farms, and aquaculture centers up to 2,700 US Gallons.  High-performance reverse flow design, superior craftsmanship an efficient recirculation pump, and a 2-year pump warranty are just a few of the features on the Super Reef Octopus calcium reactors.  Our Commercial Calcium Reactors come with our very own high water volume Water Blaster pumps which come standard with Silicone Carbide shafts and bearings, this means no worries of moving parts freezing up causing broken shafts. Equipped with a pH probe holder to monitor PH inside the first chamber of the reactor and built-in bubble counters to monitor Co2 drip rates. to help you meet the challenging task of maintaining alkalinity, calcium, and trace elements, consider adding a Super Reef Octopus calcium reactor to your aquarium system.  Equipped with the dependable and super-efficient Water Blaster 10000 recirculation pump and features independent flow valves so the user can independently control the flow of media within the reactor. Technical Specifications: Footprint: 22.1 x 21.3in | Body Diameter: Ф12in | Height: 49.3in Recirculation Pump: Water Blaster 10000 | Wattage: 125wMedia Capacity: 45L (12Gal)* | Required Feed Pump: 600-1000gph (Suggested pump: WaterBlaster 3000)

Read more less

Commercial Calcium Reactor The Reef Octopus 250PRO Commercial Calcium Reactor is developed specifically for the needs of the commercial sector including public aquariums, fish farms, and aquaculture centers up to 1,500 US Gallons.  High-performance reverse flow design, superior craftsmanship, and an efficient recirculation pump with a 2 year pump warranty are just a few of the features on the Super Reef Octopus calcium reactors.  Our Commercial Calcium Reactors come with our very own high water volume Water Blaster pumps which come standard with Silicone Carbide shafts and bearings, this means no worries of moving parts freezing up causing broken shafts. Equipped with  pH probe holder to monitor PH inside the first chamber of the reactor and built-in bubble counters to monitor Co2 drip rates. to help you meet the challenging task of maintaining alkalinity, calcium, and trace elements, consider adding a Super Reef Octopus calcium reactor to your aquarium system.  Equipped with the dependable and super-efficient Water Blaster 7000 recirculation pump and features independent flow valves so the user can independently control the flow of media within the reactor.   Technical Specifications: Footprint: 18.1 x 17.3in | Body Diameter: Ф10in | Height: 43.3in Recirculation Pump: Water Blaster 7000 | Wattage: 70wMedia Capacity: 25L (6.6Gal)* | Required Feed Pump: 600-1000gph (Suggested pump: WaterBlaster 3000)

Read more less