Revive is a revolutionary product developed by Julian Sprung for safely cleansing live stony and soft corals, zoanthids, and anemones. It is a surface cleaning dip based on plant extracts. Use for all general purpose live coral cleansing, as a part of acclimation to aquariums when corals or anemones are first received, for rinsing prior to shipping, and for rinsing newly fragmented corals, such as at coral farming facilities. 500 ml (16.8 fl oz) bottle.
odine cleaning bath for corals
Tropic Marin Coral Clean is an iodine dip for corals to prevent the unwanted introduction of parasites and/or impurities into your reef aquarium.
The Coral Clean solution is phosphate-free and less aggressive than Lugol’s solution or a freshwater bath. It will reliably remove the most common epiphytes, parasites, and impurities so that you may introduce your new corals to your tank worry-free.
Features
Gentle, effective coral dip
Removes common epiphytes, parasites, and impurities
Does not contain phosphates
Instructions:
Add 1mL of Coral Clean per each 100mL of aquarium water in a glass or plastic container. Fully immerse corals for 10-15 minutes, then shake corals lightly to remove any remaining undesirable organisms.
Carefully remove coral crabs prior to treatment. You may place them back in the coral after treatment.
Note: In some cases, it can take up to two days for corals to open fully again after the bath.
World’s first 2-stages immersion bath coral dip! Free of iodine or oxidant. C-Dip contains penetrating substances that will affect egg strands of pests.
C-Dip 1 is a professional coral dip extremely effective against parasites and bacterial infections. Free of iodine or oxidant. C-Dip contains penetrating substances that will affect egg strands of pests.
How to use: Add 12 drops for each 1 liter. Mix well, then place and gently shake the corals several times in the coral dip. You can use a small powerhead to keep the water moving. After 5 minutes, remove the corals and move them to the C-Dip 2 coral dip (make sure to have it ready before starting with C-Dip 1). Do not reuse the prepared coral dip as parasites may release toxins. Use only as an immersion bath!
WARNING! It may cause serious eye & skin irritation. Use it with caution, and wash your hand after use!
C-Dip 2 is the second protective layer of our professional coral dip against parasites and bacterial infections. C-Dip 2 also assists with the recovery of corals from stress and damage caused by pests or the shipping process. Free of iodine or oxidant.
How to use: Shake vigorously! Add 12 drops for each 1 liter. Mix well, then place the corals in the coral dip. You can use a small powerhead to keep the water moving. After 30 minutes, remove the corals and move them directly to your reef or quarantine aquarium. You can repeat the entire process of C-Dip 1 and C-Dip 2 four times each five days. Do not reuse the prepared coral dip as parasites may release toxins. Use only as an immersion bath!
Save your floors from leaking pipes and buy yourself time to make proper repairs with Aquarium Munster’s Orca Tape. If you've ever been in a situation where your plumbing has sprung a leak, you know that every second matters. Turning your circulation off may stop the water flow, but you'll want to get your life-support system back up and running as quickly as possible. This self-fusing tape can be applied to many different materials and can be used to provide a temporary waterproof seal in an emergency situation, buying you time to get replacement plumbing. The thick rubber material of the tape also acts as an electrical insulator and can be used to remedy exposed electrical cables.
Features
Seals to many surfaces
Seal leaking/damaged pipes for temporary repair
Insulate exposed electrical wires
Waterproof seal
This tape is not meant to be a permanent fix for damaged plumbing, and should only be used as an emergency measure. As soon as possible, you’ll need to arrange to get proper plumbing materials to make repairs to minor damage or leaks.
Specifications
Length: 9.8 feet ( 3 meters)
Width: 1 inch (25.4 mm)
Hotmelt connector for fixing corals
ORCA CONNECT is a hotmelt connector for fixing corals and aquarium decoration. ORCA CONNECT is very easy and clean to handle, chemically neutral and does not release any undesirable substances into the aquarium water.
Instructions for ORCA CONNECT:
Take care that the surface is clean and fat-free. Roughen up, if applicable. Pour the required amount of white plastic beads in a container with approx. 60 ° C hot water. The beads change from white to transparent and can be used as a modeling dough. After cooling down a few minutes the mass converts to white again and hardens completely.
Any unused material residues can be used by remelting fully again.
Now you can safely handle your corals without damaging their delicate tissues with these silicone-tipped Coral Tweezers from Maxspect. As an added bonus these tweezers will hover in the water column if you lose your grip, allowing you to get back to coral keeping quickly without any fuss.Features
Neutral Buoyancy -- the tweezers will hover in the water column if dropped
Made from High Strength Carbon Fiber -- lightweight but strong enough to lift heavy objects in your aquarium
Silicone Coated Tips -- Designed to avoid hurting delicate corals when you pick them up
14 Inches Long
Underwater bonding putty with a natural coralline algae color
Two-part epoxy putty
Specifically designed for underwater applications
Suitable for freshwter and saltwater
Ideal for bonding rocks for aquascapes, preparing coral frags, or cementing clam bases
Also suitable for pipework, repairs, and bonding items to aquarium glass
Dries to the color of coralline algae*
*Please note: color is most true to natural coralline algae when cured underwater. Curing the epoxy outside of the water will result in a darker, deeper red color.
D-D Aquascape Epoxy is a two-part putty designed for use in both freshwater and saltwater systems. It's ideal for bonding live rocks to create or solidify aquarium aquascapes, prepping and positioning coral frags, creating clam bases, or even reparing aquarium equipment or pipework and bonding items to aquarium glass. This putty has been developed to be stickier than competitor epoxies so that it can bond easier to wet substrates, making aquarium repairs a breeze. D-D Aquascape Epoxy can be cured either underwater or outside of the water; however, the coralline red algae color will take on a more natural color when cured underwater.
Once fully cured, D-D Aquascape Epoxy can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted (if desired). It is heat resistant up to 130 degrees Celsius. Aquascape will bond to any of the following materials: wood, brick, cement, metals, concrete, rock, plastic, glass; making it an excellent general adhesive. Please note that it is not designed to be used as a thin layer bonding agent where a conventional glue is indicated. The epoxy will become semi-hard within 3-4 hours and fully cures hard as rock overnight. It is necessary to support heavy rocks, corals and overhangs until the putty sets.
During use, take care not to overmanipulate underwater. If the aquarium water starts to become cloudy, stop using immediately and allow the water to clear.
Immerse yourself in the world of aquascaping with our high quality coral frag set!
With our 8-piece tool set made of premium steel, you are perfectly equipped for the artistic design of your aquarium. The blue titanium coating ensures a long service life and makes the tools even more rust-resistant than a pure stainless steel surface. With our selection of scissors, pliers, cutting and straightening tools and tweezers, you can design and maintain your underwater landscape exactly as you want it.
Thanks to our high-quality coating, rust deposits are optimally prevented. This ensures long-term use. The ergonomic design ensures comfortable and safe operation, so you can fully concentrate on your creative projects.Whether you have a freshwater or saltwater aquarium, our coral frag set is versatile: perfect for caring for plants, decoration and substrate, but also for creating offshoots and designing reef decorations. But that's not all - this set is also suitable for a wide range of other care and design tasks.
With the high-quality case made of washable artificial leather, you will always have your tools safely stored and at hand. Discover the endless possibilities of aquascaping now and buy our coral frag set!
8-piece tool set made of high-quality polished stainless steel
Titanium coating ensures long life and makes the tool more rust resistant
Consisting of a selection of scissors, pliers, cutting and straightening tools and tweezers
Ergonomically designed for easy and safe use
Ideal for caring for plants, decoration and substrate in freshwater aquariums and in marine aquariums for creating cuttings and caring for and setting up reef decorations
Can be used for various other maintenance and furnishing activities
Safely stored in a high-quality case made of washable imitation leather
The IceCap Coral Frag Racks feature a new elegant looking magnetic black shelf that will easily blend into the side of your aquarium. Each hole has a clever membrane that securely grips the frag plugs to keep them in position even if they have different sized stems. The racks modular design allows the user to move the rack for easy maintenance or acclimation of small corals. Available in 3 models.
Extra Thick Coral Frag Super Glue!
Not all super glues are the same and Polyplab's Premium Coral Frag Glue is the perfect solution for larger frags and extended fragging sessions. The ultra-thick super glue gel has a bunch of uses, from regular fragging, aquascaping, or even placing entire colonies on rocks. The composition of the glue allows it to be workable for an extended period of time, allowing you to work with the coral for the perfect placement. If you need to work underwater, the tube design keeps water from being sucked back into the tube, keeping the glue within the tube from being compromised. Every tube comes with its own applicator stem, and initial use child protection ring.
8-hour working time
Perfect for long fragging sessions
Ultra-thick for large gaps and support
Tube design leads to less waste
Reacts and bonds in water within 5-15 seconds
Made for use with freshwater or saltwater
Frag Plugs with a Dual Purpose
Extremely porous
Stimulates coral growth
Serves as bio-media
Completely inert-- wont affect water chemistry
Rapidly colonized by beneficial bacteria
Stable ceramic base that will not decompose over time
Maxspect's Nano-Tech Bio-Plugs are created using stabilized microbial sewage treatment technology with Biological Aerated Filter (W-BAF). This proprietary technology is formed into inert ceramic plugs which serve a dual function as both a coral frag base and a biological filtration media. Due to the extremely porous nature of each plug, water current is able to penetrate the Bio-Plug to reach the surface of the coral frag from all sides, allowing the coral to extract necessary nutrients from the water column with ease. Each plug also has an ultra-high surface area for colonization by beneficial bacteria strains that can work to lower nitrites, nitrates, and ammonia naturally. The bacterial colonies can also be captures by the coral frag polyps as an additional food source, increasing their growth rate.
BRS General Bonding Super Glue has a water-like consistency. If you need thicker super glue for your project, we have BRS Extra Thick Super Glue Gel available.
The BRS General Bonding Glue has been selected to provide the perfect consistency for aquascaping projects where a thinner glue is needed to get into small gaps between rocks and bond them together. BRS General Bonding Glue is reef safe and ideal for aquascaping with dry live rock. Lower viscosity super glues work better in these cases because they will quickly move to fill in tight gaps between bonding surfaces better than thicker superglues and will provide a fast and secure bond with lower cure times. This allows them to work well for placement between smaller rock pieces when creating a larger structure. This glue can also be used in conjunction with a small amount of mortar or epoxy where there is a need to fill a slightly larger gap between rocks. Thinner glues like this work well for close surface to surface bonds and can also work well for attaching some coral types such as zoanthid mats.
Note: Dispensing tips may clog after use, but can be cleaned with acetone to remove excess glue.
Insta-set accelerator will help speed up the set time of any cyanoacrylate super glue. The most frustrating thing about fragging coral is the time you need to wait for the glue to set, or the frag may simply just fall over and get glue all over. With the accelerator that time spent waiting will be significantly reduced leaving more time for gluing more frags and enjoying your tank. Insta-set is not like other accelerators that smell horrible and have a very strong chemical smell. Bob Smith has put a strawberry scent in their accelerator to make use enjoyable.
Insta-set is very easy and safe to use, simply just glue your frag to your plug or tile like you normally would, and then spray a very small amount of Insta-set on the glue, and place in tank water immediately after applying the accelerator due to the heat that will be generated.
Special Notes:
Keep out of reach of children
When using a super glue accelerator it is important to manage the heat that can be produced. With live rock it is not as important to monitor the heat that will be generated from the reaction that will occur, however with coral it is imperative to place the frag in water immediately after applying the Insta-set. Just as long as the heat is monitored Insta-set is very safe to use for many different purposes in the reef tank and around the house.
IC-Gel Insta Cure Cyanoacrylate is a widely used super glue within the hobby. With its quick dry time, and extra thick consistency you can use the IC-Gel on vertical surfaces and it will not run. It is great for heavier frags that you need to stand vertical or heavier rock work. IC-Gel comes in a tube like toothpaste which makes it very easy to dispense the amount needed, and when it comes down to the last few drops you can still get it out, unlike the harder plastic bottles.
Super glue (cyanoacrylate) is widely used for mounting coral frags to plugs, rocks, and what ever you may need to attach them to. Super glue can also be used to bond rock work when aquascaping for a seamless look. We find that if larger gaps are needed to be bridged when aquascaping either building up layers of glue, or placing a smaller rock that fits in the gap and then gluing over the top works really well. Usually when using super glue with aquascaping we will take a small amount of large grain sand to help give the glue some texture and blend it into the rock as well.
IC-Gel Insta Cure Cyanoacrylate is a widely used super glue within the hobby. With its quick dry time, and extra thick consistency you can use the IC-Gel on vertical surfaces and it will not run. It is great for heavier frags that you need to stand vertical or heavier rock work. IC-Gel comes in a tube like toothpaste which makes it very easy to dispense the amount needed, and when it comes down to the last few drops you can still get it out, unlike the harder plastic bottles.
Super glue (cyanoacrylate) is widely used for mounting coral frags to plugs, rocks, and what ever you may need to attach them to. Super glue can also be used to bond rock work when aquascaping for a seamless look. We find that if larger gaps are needed to be bridged when aquascaping either building up layers of glue, or placing a smaller rock that fits in the gap and then gluing over the top works really well. Usually when using super glue with aquascaping we will take a small amount of large grain sand to help give the glue some texture and blend it into the rock as well.
