Compatible with both G5 and G6 Radion XR30s.
Multi-Light Radion Mounting System - Slide Mount
The Multi-Light RMS is a modular and customizable Radion LED mounting solution for all XR15 and XR30 systems, Gen 5 and earlier. The RMS Slide Mounts connect your Radion LED to the RMS Track and allow for easy positioning anywhere along the track.
The Radion Slide Mount is designed to work with the RMS track system and requires the purchase of the three main components:
RMS Track - Horizontal piece that spans between the RMS Multi-Light Arms
Multi-Light RMS Arm Kit - Vertical pieces that mount to your tank and support the RMS Multi-Light Track
or
XR717 RMS Hanging Kit - Allows for simple hanging of the RMS Tracks where tank mount arms are not desired. By hanging the tracks you can easily adjust the height of the lights above the tank for a very clean looking install.
RMS Slide Mounts - Adjustable mounting brackets that attach to the RMS Track and support the Radion LED lights
RMS Slide Mount features:
Flexible slide mounts allow for precise placement of your Radions
Can support XR15 and XR30 lights on the same track
Backwards compatible with all generations of Radion
Rigid and light-weight
Mounts Radions approximately 7.5" inches (19cm) above the tank
What's Included?
RMS XR30 G5/G6 Slide Mount
4x Mounting Screws
Compatible with both G5 and G6 Radion XR15s.
Multi-Light Radion Mounting System - Slide Mount
The Multi-Light RMS is a modular and customizable Radion LED mounting solution for the XR15 and XR30 systems. The RMS Slide Mounts connect your Radion LED to the RMS Track and allow for easy positioning anywhere along the track.
The Radion Slide Mount is designed to work with the RMS track system and requires the purchase of the three main components:
RMS Track - Horizontal piece that spans between the RMS Multi-Light Arms
Multi-Light RMS Arm Kit - Vertical pieces that mount to your tank and support the RMS Multi-Light Track
or
XR717 RMS Hanging Kit - Allows for simple hanging of the RMS Tracks where tank mount arms are not desired. By hanging the tracks you can easily adjust the height of the lights above the tank for a very clean looking install.
RMS Slide Mounts - Adjustable mounting brackets that attach to the RMS Track and support the Radion LED lights
RMS Slide Mount features:
Flexible slide mounts allow for precise placement of your Radions
Can support XR15 and XR30 lights on the same track
Rigid and light-weight
Mounts Radions approximately 7.5" inches (19cm) above the tank
What's Included?
RMS XR15 G5/G6 Slide Mount
4x Mounting Screws
The Aqua Illumination Prime Flex Arm was designed to exclusively work with AI Prime LED lights. The mount is very robust, and adaptable allowing you to use the Flex Arm on any type of aquarium rim up to 1.20" (30mm). The flexible portion of the arm has a silicone coating allowing easy cleaning while protecting it from moisture.
The included set screw system allows you to twist the arm within the base letting you fully secure your Prime LED to the screw attachment point. After your Prime has been snugged to the Flex Arm, you can loosen the set screw located within the base and twist the arm until it is perfectly flat, then tighten the set screw (do not over tighten the set screw, hand tighten only).
One of the biggest issues with mounting lights can be wire management, and the Flex Arm even has that covered, supplying clips that can attach directly to the Flex Arm and secure the power cord for the Prime LED, keeping things neat and clean.
Easy Installation
Wire management clips
Soft coated arm
Compatible with Rimmed or Rimless tanks up to 1.20" (30mm)
Flexible Arm Length - 19"
Total Overall Length - 22"
Whats Included
1x 18" Flex Arm
1x Base Screw
1x Base Plug
3x Cable Routing Clips
1x Allen Wrench
1x Base Mounting Gasket
Note: When installing the Flex Arm do not adjust the arm while it is mounted to the rim of any tank. Excess force from adjustments may put excess stress on the glass or acrylic.
The Aqua Illumination Prime Flex Arm was designed to exclusively work with AI Prime LED lights. The mount is very robust, and adaptable allowing you to use the Flex Arm on any type of aquarium rim up to 1.20" (30mm). The flexible portion of the arm has a silicone coating allowing easy cleaning while protecting it from moisture.
The included set screw system allows you to twist the arm within the base letting you fully secure your Prime LED to the screw attachment point. After your Prime has been snugged to the Flex Arm, you can loosen the set screw located within the base and twist the arm until it is perfectly flat, then tighten the set screw (do not over tighten the set screw, hand tighten only).
One of the biggest issues with mounting lights can be wire management, and the Flex Arm even has that covered, supplying clips that can attach directly to the Flex Arm and secure the power cord for the Prime LED, keeping things neat and clean.
Easy Installation
Wire management clips
Soft coated arm
Compatible with Rimmed or Rimless tanks up to 1.20" (30mm)
Flexible Arm Length - 13"
Total Overall Length - 16"
Whats Included
1x 12" Flex Arm
1x Base Screw
1x Base Plug
2x Cable Routing Clips
1x Allen Wrench
1x Base Mounting Gasket
Note: When installing the Flex Arm do not adjust the arm while it is mounted to the rim of any tank. Excess force from adjustments may put excess stress on the glass or acrylic.
Backwards compatible with all generations of Radion.
Single Fixture Radion Tank Mount - Arm Kit
Hanging your EcoTech Marine Radion from the ceiling may not always be practical or possible. For this reason, EcoTech thoughtfully created the Radion Mounting System (RMS) for a simple and secure mounting system for the XR30 lighting fixture. Easily mount your Radion XR30 directly to your standard or rimless tank with the EcoTech Marine XR30 RMS.
Features
Mounts a single Radion fixture
Backwards compatible with all generations of Radion
Position your Radion with the sliding extension bar
Sleek design
Easy set up
Sturdy - won't bow
Innovative clamp system
Integrated Cord Management
Aluminum construction
Adjusts for fine tuning
Grooves to hide cords
Multiple extension rails included in kit for different tank sizes
Product Specifications:
Maximum Tank/Trim Thickness: 1-3/8"
Dimensions of clamp: 3.5" x 3.25" x 3"
Clearance needed above RMS: 13"
What's Included?
RMS XR30 G5/G6 Tank Mount System
Backwards compatible with all generations of Radion
Single Fixture Radion Tank Mount - Arm Kit
Hanging your EcoTech Marine Radion from the ceiling may not always be practical or possible. For this reason, EcoTech thoughtfully created the Radion Mounting System (RMS) for a simple and secure mounting system for the XR15 lighting fixture. Easily mount your Radion XR15 directly to your standard or rimless tank with the EcoTech Marine XR15 RMS.
Features
Mounts a single Radion fixture
Backwards compatible with all generations of Radion
Position your Radion with the sliding extension bar
Sleek design
Easy set up
Sturdy - won't bow
Innovative clamp system
Integrated Cord Management
Aluminum construction
Adjusts for fine tuning
Grooves to hide cords
Multiple extension rails included in kit for different tank sizes
Product Specifications:
Maximum Tank/Trim Thickness: 1-3/8"
Dimensions of clamp: 3.5" x 3.25" x 3"
Clearance needed above RMS: 13"
What's Included?
RMS XR15 G5/G6 Tank Mount System
