Multi-Function WiFi Controller
The Octo Pulse WiFi Controller can now power two Pulse Flow Pumps simultaneously and easily adjust flow modes via onboard control or with the intuitive OCTO App available for both IOS and Android devices. The controller works with all Octo Pulse Flow Pumps.*
Features
App Controllable
4 Pre-programmed Flow Patterns
Dual Feed Mode (15-60min)
Single Controller to Control 2 Wave Pumps from one Power Source
0-10V 3rd Party Control Capable
Works with Octo Pulse 2, Octo Pulse 4, Octo Pulse 2+, and Octo Pulse 4+*
Universal 0-10v Control
For all those that desire more versatility, the Octo Pulse can link up to most 3rd Party Controllers by using an available 0-10v port. This makes the pump very versatile and almost universally compatible with most system controllers, including the HYDROS Control X4 and X10, HYDROS WaveEngine, APEX by Neptune Systems, or the Reef Angel, and others.
Power Supply Legend
1.0A: OP2/OP2+OP22.5A: OP4/OP4+OP24.0A: OP4/OP4+OP4
*Each pump and combination of pumps require a particular power supply to properly drive the Octopulse pump.
Aquarium Temperature Control by InkBird
On/Off Control, Heating and Cooling
High and Low Temperature Alarms
Dual Relay Design for Redundancy
A heater controller is a crucial safeguard in an aquarium, as heater failure is one of the leading causes of aquarium crashes. ITC-308S is an easy-to-use, safe and reliable dual relay output temperature controller. The ITC-308S has two outlets - one for a heater and the other for a cooling device such as a fan or chiller. This controller can also be used to control a single heating or cooling device if you don't wish to use the other outlet.
Specifications
Temperature Resolution: 0.1 °C/ 0.1 °F
Temperature Accuracy: ±2 °F
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Sensor Length: 2m / 6.56ft
Controller Dimensions: 140x68x33mm (5.5" x 2.7" x 1.3")
What's Included?
ITC-308S Temperature Controller
Temperature Probe
Manual
EHEIM classicLEDcontrol+e allows you to control the brightness level in your aquarium easily without cables.
Sunrise, sunset, cloud effects, moonlight ... The natural changes in brightness in your aquarium contributes a lot to the well-being of plants and animals. With our classicLEDcontrol+e lighting control system, you can simulate the natural course of light in the day - and even set a natural moon cycle. The controller offers you maximum performance, high power, a stable connection, and compatibility with all devices of the EHEIM Digital family.The classicLEDcontrol+e is quick to install, and you simply programme and control it via smartphone, tablet, or PC. You can even select one of the pre-installed lighting scenarios. Or you can create your own scenario and adjust the brightness level individually.
The lighting control only works in conjunction with EHEIM classicLED luminaires. When changing the light source (e.g. T5/T8 to classicLED) or when setting up your aquarium from scratch, you can use the acclimatisation function to help you. In addition, the controller automatically checks whether a new software update is available if a network connection is existing. All updates can also be downloaded free of charge from the EHEIM website.
Advantages of the EHEIM classicLEDcontrol+e
Optimised controller with maximum performance, high power, and a stable connection.
Compatible with all devices of the EHEIM Digital family.
Control the aquarium lighting - only available with EHEIM classicLED luminaires and EHEIM classicLED power supplies.
Wireless operation via WLAN-capable end devices (smartphone, tablet, PC/Mac).
Two connections can be controlled separately; allowing two individual lighting scenarios to be used together, i.e., several luminaires can be controlled individually or in synchronicity.
Simulate the lighting over of the course of the day as in nature.
Use pre-installed lighting scenarios for different living spaces.
Use/create individually programmable lighting sequences.
Create moonlight scenarios with natural moon phases.
Freely configurable scenarios: sunrise, sunset (each lasting up to 3 hours), cloud effects, moonlight, etc.
Lighting scenarios can be saved, loaded and shared online.
Comes with an expert mode with additional setting options.
Comes with an acclimatisation mode, e.g. when changing light source (T5/T8 to classicLED) or when setting up new aquariums.
Built in-optimum settings for the luminaires: "classicLED daylight" and "classicLED plants“
Has a quick run feature to test selected settings.
Automatic changeover of summer and winter time.
Software updates free of charge for download on the EHEIM website.
Automatic update with existing internet connection.
Energy consumption display.
Highest safety and reliability - 3 years warranty.
Depth:
28
Freshwater:
Yes
Height:
97
Manufacturer guarantee:
3 Year(s)
Packing:
1 Part (s)
Packing dimensions(Depth):
4,4 cm
Packing dimensions(Height):
19 cm
Packing dimensions(Width):
11,1 cm
Power of:
2x36 Watt
WiFi:
Yes
Width:
97
EHEIM pHcontrol+e – the smart controller for monitoring and readjusting the pH value in your aquariumWith the EHEIM pHcontrol+e you can easily monitor and optimize the pH in your aquarium via a smartphone, tablet, or PC/MAC simply via a WiFi connection and your web browser. A pH sensor measures the current pH value of the water, and the pHcontrol+e automatically provides the necessary CO2 supply. By controlling the magnetic valve connected in series to the CO2 system it adds as much CO2 as required until the desired pH value is reached.To achieve this you must connect your CO2 system, i.e., a CO2 bottle via pressure reducer as well as magnetic valve (see the EHEIM CO2 sets) and a CO2 diffuser. The pHcontrol+e has a day/night control and can be linked to the lighting control EHEIM LEDcontrol+e (see the EHEIM DIGITAL family).In addition to light, nitrogen, phosphate, trace elements, etc., the plants in your aquarium need CO2 above all as an important nutrient. The better they thrive, the more oxygen they release, which the fish need to breathe. Thus, the EHEIM pHcontrol+e indirectly provides oxygen and the optimal pH value for your fish by adding CO2. This is usually between pH 6 and pH 8; pH 7 is considered a neutral value for reference.Note:The basis for measuring and stabilising the pH value is the carbonate hardness ("KH") of the water. Therefore, the EHEIM pHcontrol+e (in Smart mode) initially queries the KH value. Because KH, CO2 and pH value influence each other.Features of the EHEIM pHcontrol+e
A smart controller for monitoring and controlling the pH value in the aquarium by regulating the addition of CO2.
Includes Wireless WiFi connection with a WLAN-enabled end device (smartphone, tablet, PC/MAC).
Has connection and compatibility with devices of the EHEIM DIGITAL family.
Measures the pH value through the pH sensor (measuring range: pH 0 to pH 14).
Control range of the controller pH 6 to pH 9.
Needs to be coupled via pressure reducer with CO2 bottle (EHEIM CO2 set).
Electronically controls addition of CO2 through interposed magnetic valve.
Adjusts CO2 addition by linking with LEDcontrol+e (day/night control) in smart mode or simple and extended bio mode with own day/night control.
Queries the KH value (carbonate hardness) in advance.
Sets water test and calibration reminders.
Guided calibrations of the pH sensor.
Sends warning for deviation of pH value (up/down).
Notes if EHEIM pH sensor needs to be replaced.
Provides best performance, high power, stable connection, and large memory capacity through new improved chip generation
Highest safety and reliability - 3 years warranty
H2Ocean Compact Auto Top-UpThis ultra-compact smart auto top-up unit is simple to mount, easy to use and has twin optical sensors for added security.
Features
• Auto Top-Up Unit (ATO)• Compact intelligent sensor with twin optics and visual alarm• Built-in real-time failsafe protection• No moving parts to fail• Small footprint• Easy to install• Plug & Play• Complete with DC Top-Up Pump
Specifications
Power input: 100˜240 VAC 50-60 HZ
DC Pump: Head 250cm, Flow rate: 280 lph
Glass mounting thickness 12.5mm
Pipe size 9mm OD - 6.5mm ID , 2 meters Long
Recomended for aquariums above 50L in volume, for nano or pico tanks below this volume the AutoAqua Smart Nano ATO can be used.
With the EHEIM streamcontrol you can control several individual pumps with two programs
Most aquarium inhabitants need changing (fluctuating) water currents, such as in rivers or coral reefs, depending on their origin. With the appropriate circulation and / or flow pumps you can achieve constant movement - but how do you generate a varied flow?EHEIM streamcontrol offers the ideal solution. Simply plug the pump's mains plugs into the supplied double connector strip, switch on the device and then set the flow intervals. Two programs are available: a) alternating pump frequency and b) synchronous pump frequency. You simply determine the time intervals with two dials.Before feeding, simply use the pause button (Food) to interrupt the flow and the pumps will switch off for 10 minutes. After feeding, the set program continues automatically or simply press the (Food) button again.
Advantages of the EHEIM streamcontrol flow simulator
Controller for aquarium pumps
Suitable for circulation and flow pumps
Dual connector strip (supplied)
Connection for two (or more) pumps
Load per socket max. 100 W
Two different programs:
a) alternating flow this means the pumps are switched on and off alternately or
b) synchronous flow – meaning both pumps are switched on and off simultaneously.
Individually adjustable time intervals from 1 to 60 minutes
Program runs permanently - for an unlimited period of time
Break button for feeding (food button)
Suitable for fresh and marine water
Highest safety and reliability - 3 years warranty
Freshwater:
Yes
Manufacturer guarantee:
3 Year(s)
Packing dimensions(Depth):
21 cm
Packing dimensions(Height):
13 cm
Packing dimensions(Width):
13 cm
Sea water:
Yes
EHEIM TWINfeeder
If you don’t always have time an automatic fish feeder is ideal. Also when on holiday. You can easily programme the feeding times as well as the amount of food and the fish feeder ventilates the food at precisely the correct doing time into the water. With a simple press of a button “snacks” are also possible at any time.
The function keys are splash proof. A warning system quickly shows low battery level. And of course the feeders fit feeder openings on the VARILUX aquarium hoods;.
There are two models: the smaller fish feeder for flakes and the TWIN with two separate chambers for different types of food.
EHEIM TWINfeeder
Automatic feeder with 2 separate chambers for different types of food
2 separate feed chambers for granules, sticks, pellets, flakes
Drums are individually programmable
Random dosing for natural feeding
Both drums are aerated
2 types of food can be fed in parallel; the advantage of this is a food supply for all livestock in the swimming zones
Large display
Warning system quickly indicates low battery level
Includes batteries
Freshwater:
Yes
Manufacturer guarantee:
3 Year(s)
Packing:
1 Part (s)
Packing dimensions(Depth):
16.3 cm
Packing dimensions(Height):
12.3 cm
Packing dimensions(Width):
8 cm
Sea water:
Yes
With the automatic EHEIM Refill+ you can be certain that your aquarium water is always on a healthy level.
Water is permanently evaporating in aquariums without cover. This is a major problem and can be life-threatening for the aquarium inhabitants, due to the fact that harmful substances (like nitrate among others) and metabolic products concentrate in the water. Marine water tanks also have the added risk that the salinity increases (density).
EHEIM Refill+ automatically refills the evaporated water. For this purpose a sensor is permanently measuring the water level. You simply place the EHEIM Refill+ outside on the glass pane of the aquarium – or in case of a marine water aquarium alternatively at the filter tank in the cabinet (sump). As soon as the water level sinks, the refill pump starts.Thereby an intelligent controller monitors the refilling process and adapts the quantity of water to the needs and registers changes. In case of significant changes the refilling process will be stopped and like that nothing can happen.
Advantages of the automatic EHEIM Refill+
Automatic refilling of evaporated water, perfect during holidays.
The sensor with LED display is permanently measuring the water level
Fastening of the sensor easily accessible outside of the glass pane of the aquarium – or in case of a marine water tank alternatively at the filter tank in the cabinet (sump).
Intelligent controller with LED display regulates the refilling. It memorizes the filling quantity and the filling times and this way adapts the water quantity to the tank size and the changes (e.g. seasonal).
Safety: In case of significant irregularities the refilling process will be stopped and this prevents an overflowing.
Energy saving low voltage pump (4,5 W), maintenance-free when operating with ultrapure water (osmosis water).
Refilling tube and drainage elbow with mounting bracket for glass thicknesses 4-12 mm.
All components are of high quality and work extremely reliable.
Intelligent filling level control with safety stopEHEIM Refill+ is an electronically controlled automatic refill for all (open top) fresh water and marine water tanks; it refills evaporated water regularly and at the same time adjusts the refill quantity to the tank size and the evaporation rate.
The automatic refill consists of power supply unit, controller with LED display, sensor with LED display, refill pump as well as refill tube and drainage elbow with mounting bracket and clamp.
SensorThe sensor monitors the water level. It is glued outside on the glass pane of the aquarium - in case of a marine water tank alternatively at the at the filter tank in the cabinet (sump). As soon as the water level sinks, the refill pump starts.ControllerThe intelligent electronics memorize the tank size (refill quantity and duration) and the e.g. seasonally evaporation (refilling frequency). In case of significant deviations the security stop is released and this prevents an overflowing.The refilling process is stopped,- if it needs twice as long as before – or- if the time between the refill intervals is significantly shorter or longer (shorter than the half or twice as long).The automatic refill can be switched off at a button (e.g. for water change or work in the aquarium).Refill pumpEnergy saving low voltage pump (4,5 W), is placed in the refill reservoir (tank, bucket, canister or others). As it normally has only contact with ultrapure water or with osmosis water it is not necessary to clean it.It is suggested for refilling to use ultrapure water or osmosis water because if you refill tap water, the salt concentration and the level of unwanted substances increases (nitrate, phosphate, silicic acid, total hardness, carbonate hardness etc.)
Freshwater:
Yes
Packing:
1 Part (s)
Packing dimensions(Depth):
9 cm
Packing dimensions(Height):
23.6 cm
Packing dimensions(Width):
16 cm
Sea water:
Yes
With the EHEIM autofeeder+ we offer you the smart version of our (basic version) autofeeder with additional functions and advantages.The EHEIM autofeeder+ is our intelligent automatic feeder with digital control via WLAN. All functions can be programmed and monitored via smartphone, tablet or PC/MAC. You can set both feeding times and quantities individually and generate a fasting day. There is protection against overfeeding and you will also receive an email message when the food in the drum is running low. In addition, synchronisation with other devices in our WiFi programme is also possible. For example, when linked to the EHEIM thermocontrol+e aquarium heater, you will be warned by email before feeding if the water temperature is too high and, when linked to the EHEIM professionel 5e external filter, the flow rate can be automatically reduced or increased for 10 minutes during feeding.EHEIM autofeeder+ has a power supply unit so it is not battery operated like the standard autofeeder. Maximum safety and reliability are a matter of course and the feeder comes with a 3-year guarantee.Advantages of EHEIM autofeeder+
Electronic feeder with integrated WLAN function; programming and control via smartphone, tablet or PC/MAC
No need to install an app
Integration with a home WLAN network is possible
Programming of different feeding times and feed quantities
Optional; one randomly generated fasting day per week
Overfeeding protection can be switched on to prevent accidental overdosing
A new type of slider on the feed drum makes it possible, for example, to supply even fish fry with very small amounts of feed.
Query of the current feed level
Predicting the range of the residual feed
Notifications by e-mail as soon as the fill level falls below 30 % - also as soon as the feed drum is empty
Smart linking with other electronically controlled devices: When feeding, for example, the flow rate of a linked EHEIM professionel 5e external filter can be reduced or increased for 10 minutes.
Various devices of the EHEIM WIFI programme can be grouped together, either by aquarium, room, family member or similar.
Protection against oxygen deficiency and tipping of the water quality: If the water temperature exceeds 30 °C, a warning is sent by e-mail providing the EHEIM thermocontrol+e aquarium heater is linked
Feeding stops during water changes or maintenance: If the linked filter is not running, no feeding takes place.
Actively vented feed chamber
Capacity approx. 125 ml
All functions and the WLAN network can be switched on and off at any time
Manual feed programming is also possible at any time
Operated with a safety power supply unit with protective extra-low voltage (not battery operated)
Convenient cable length approx. 200 cm
Incl. bracket for mounting on open aquariums or terrariums
High safety and reliability plus a 3-year warranty
EHEIM autofeeder
If you don’t always have time an automatic fish feeder is ideal. Also when on holiday. You can easily programme the feeding times as well as the amount of food and the fish feeder ventilates the food at precisely the correct doing time into the water. With a simple press of a button “snacks” are also possible at any time.
The function keys are splash proof .A warning system quickly shows low battery level. And of course the feeders fit feeder openings on the VARILUX aquarium hoods; they are also equipped with a bracket for open-top aquariums and terrariums – also for nano aquariums.
EHEIM automatic fish feeder
Compact equipment with a feeding chamber; mainly for flake food
Easy to understand programming
An additional programme for double feeding
Actively aerated food chamber
Capacity ca. 100 ml
Additional “snacks“ possible at the touch of a button
Function keys are splash resistant
Warning system quickly indicates low battery level
Including bracket for mounting on an open-top aquarium or terrarium
Includes batteries
Freshwater:
Yes
Manufacturer guarantee:
2 Year(s)
Packing:
5 Part (s)
Packing dimensions(Depth):
8.7 cm
Packing dimensions(Height):
14.9 cm
Packing dimensions(Width):
6.8 cm
Sea water:
Yes
Max Tank Thickness - 1/2"
The VeggieMag uses a strong magnet to hold your SeaVeggies clip in place on windows up to 3/4” thick. Easy to position at any level in the aquarium and easy to retrieve because it floats.
Multi-purpose tool for feeding, applying solutions, siphoning or blowing:
Feed corals, anemones, zoanthids, seahorses or any timid or slow moving tank inhabitant
Apply solutions to pests
Siphon out small items
Remove sand from jets with blow function
Disposable replacement tips sold separately
Tiny, Reliable and Long-lasting Auto Top Off System
*NEW Controller programming & circuitry for added system protection
*NEW Improved sensor design for longer durability
World’s smallest dual-sensor ATO
Two layers overfill protection
Intelligent QST programming
Secondary optical sensor
Super precise water level control
Super easy installation; plug-and-play
No programming or adjustments required
Works in complete darkness
With huge features jammed in a tiny package, the Duetto2 is the perfect ATO for your aquarium. XPAqua’s proprietary dual-optical sensor packs two precise level sensors in one incredibly small package, which has been redesigned for even better lifespan and durability! In addition to keeping your water level constant, the two sensors also work in concert with the updated controller's intelligent QST programming to help prevent overfilling.
All the installation parts are included and a magnetic coupling allows you to easily mount or adjust the dual-sensor. Installation takes just seconds so you can spend less time working on your aquarium and spend more time enjoying your aquarium.
Specifications:
ATO DC Pump Max Head - 8.2 ft
ATO DC Pump Flow Rate - 74 gph
Controller Dimensions - 2.2" H x .88" W x 1.9" L
Sensor Cable Length - 10 feet
Pump Cable Length - 69 inches
Max Tank Mounting Thickness: 1/2"
Power Supply Cable Length: 67 inches
Tubing ID: 6.5mm
Tubing OD: 9.0mm
What's Included?
1x Duetto Optical Controller
1x Power Supply
1x Water Pump
1x Siphon Break
7ft 6.5 mm ID / 9.0 mm OD Water Tubing
Replenish Evaporated Water... with Confidence!
The WaveReef ATO System is an easy-to-use pump and sensor combo that offers peace of mind when replenishing evaporated water to an aquarium. Its twin optical sensors extend the device’s life and reliability by limiting the frequent powering on and off of the refill pump.
This system also includes a third (safety) sensor that provides another level of security to prevent overflows. The WaveReef NATO-3M ATO is a well-thought-out automated system with a fail-safe design that uses two (2) optical sensors to monitor the fluid level of your aquarium or sump. The third optical sensor provides real-time protection against the failure of the second sensor. Best of all, it is very easy to install and contains no moving parts that can fail.
Automated Testing for the Three Most Critical Reef Parameters
Fully Automated Alkalinity, Calcium, and Magnesium Testing
Includes 2-Month Trident ACM Reagent Kit
Seamless Integration with Neptune Systems Apex Controllers
Precision Testing with Consistent, Repeatable Results
Test Your Aquarium Water up to 24 Times Per Day
Apex Fusion Graphing, Alerts, and Automation Support
Compatible with Automatic Dosing Control When Paired with DŌS
Includes 2-Month Trident ACM Reagent Kit
The Neptune Systems Trident ACM is an automated testing device designed to continuously monitor alkalinity, calcium, and magnesium in saltwater reef aquariums. By removing the need for manual test kits, the Trident delivers consistent, high-frequency data that helps reef keepers better understand consumption trends, detect issues early, and maintain long-term stability.
The Trident connects directly to a compatible Neptune Systems Apex controller and logs every test result into Apex Fusion, where results are graphed over time and can trigger alerts or automated actions. When paired with a Neptune Systems DŌS or DŌS QuietDrive dosing pump, the Trident becomes the foundation of a closed-loop testing and dosing system that can automatically adjust additive delivery to maintain target parameters.
How it Works
The Trident uses automated titration combined with an internal colorimeter to replicate the same chemical testing process used in manual hobby test kits, but with far greater consistency. On a scheduled basis, the Trident draws a small water sample from the aquarium, mixes it with reagent, and precisely measures the color change using a controlled peristaltic pump system.
Once the test is complete, the sample and reagent are expelled to an external waste container, and the measured value is logged into the Apex. This process repeats automatically based on the testing schedule you define.
Apex Integration & Alerts
All Trident test results are displayed in Apex Fusion, where data is stored, graphed, and analyzed over time. Users can configure alerts to notify them if alkalinity, calcium, or magnesium move outside of a defined safe range.
Beyond notifications, Trident data can also be used to trigger automated responses such as pausing dosing, adjusting output, or activating other connected equipment to help protect the aquarium from instability.
Automatic Dosing Control with Neptune DŌS
When paired with one or more Neptune Systems DŌS dosing pumps, the Trident allows you to enable optional Automatic Dosing Control (ADC). ADC takes results from the Trident and uses them to gradually adjust what the DŌS delivers. Built-in safeguards protect your aquarium by comparing measured changes against dosing adjustments. Dosing changes are limited to ±35% per adjustment. If no expected change is detected, ADC will shut down auto tuning, notify you, and revert to the original dosing levels.
Setup & Operation
Installation is designed to be quick and straightforward. The Trident connects via a single cable to the Apex's EB832 Power Bar, uses two lengths of tubing for sample intake and waste output, and is configured through guided setup tasks in Apex Fusion. No manual calibration, reagent mixing, or probe tuning is required.
Testing is quiet and compact enough to run inside most aquarium cabinets without drawing attention.
Compatible Neptune Systems Apex Controllers
A3 Apex (Apex Pro, Apex, Apex Jr.*)
A2 Apex (Apex, Apex EL)
*Note: If you're using an A3 Apex Jr., you'll need a 36W 24VDC Power Supply and Aquabus cable.
Requires:
Open 1Link port or 24V power supply + Aquabus cable
Neptune Systems DŌS or DŌS QuietDrive required for automated dosing
Specifications
Dimensions: 9.8" x 12.4" x 4.9"
Alkalinity Precision: ±0.05 dKH
Calcium Precision: ±15 ppm
Magnesium Precision: ±15 ppm
Test Duration: Approximately 7 minutes per test
Sample Volume: ~8 mL per test
Maximum Head Height: Must be less than 4 ft from water source
What's Included?
Neptune Systems Trident ACM Tester
1Link Cable
Black Sample Tubing (5 feet)
Clear Waste Tubing (5 feet)
2-Month Trident ACM Reagent Kit
The Trident Waste Line Tubing from Neptune Systems is a replacement part for maintaining the operation of your Trident system. This tubing is designed to replace worn, dirty, or damaged waste lines, helping ensure accurate water testing.
High quality, American-made ORP probe to meet your saltwater aquarium needs.
Made in the US under strict quality control
High-grade platinum rod
Double junction designed specifically for contact with proteins or heavy metals
Longer lifespan than single junction
BNC connector with superior insulators
Cable has low noise design with conductive copper layer between braid and center conductor
Less frequent and quicker calibration
10 Ft Cord
BRS Lab Grade ORP Probe Features:
Double Junction Probe: A double junction probe has a second seal and junction found at the center of the probe. The double junction design adds to the cost and complexity of the probe but they are recommended in instances where the probe will come in contact with proteins or heavy metals. When these elements come in contact with the silver within the probe gel they can precipitate on the porous junction and clog it which can cause drift and shorten the life of probe.
The double junction design used in this probe has a second junction in the center of the probe which creates two chambers within the probe. The first one is filled with the reference gel containing mostly potassium chloride, silver chloride and reference probe. The second chamber has just reference gel containing mostly potassium chloride. This design prevents precipitation by keeping the silver away from the second porous junction at the bottom of the probe which is exposed to the aquarium water.
The BRS Lab Grade probe uses pelon strips as a junction material which is a true electrochemical insulator which allows a complete circuit between the reference probe and the tank but allows a very minimal transfer of elements found within the probe or tank. The pelon strip is also much easier to re-wet than the ceramic junctions in the case of accidental drying out of the probe.
The BNC connector is also made to higher quality specifications with superior insulators between the shell and center pin to reduce noise and increase accuracy. The outer shell on the BRS Lab Grade Probe is made using Ultem rather than less expensive polycarbonate which is what most probes use because it is the most inexpensive material available. The Ultem shell is a highly resistant material and inert to a wide range of materials making this one of the more chemically compatible options available for probes like this.
What's Included?
1x BRS Double Junction ORP Probe
Neptune Systems A3 Apex Pro System
The Ultimate Smart Aquarium Controller for Complete Monitoring & Automation
Take full control of your reef aquarium with the A3 Apex Pro System, the most advanced monitoring and automation solution in the Neptune ecosystem. Designed for serious aquarists, this powerful system combines intelligent control, real-time monitoring, and seamless connectivity to keep your aquarium stable, safe, and thriving.
Why Choose Apex Pro?
The Apex Pro isn’t just a controller—it’s a complete ecosystem that helps prevent disasters, automate routine tasks, and optimize your aquarium’s performance with precision.
Advanced Monitoring & Control
Monitor temperature, pH, ORP, salinity, and water level*
Real-time alerts via smartphone when parameters go out of range
Built-in WiFi & Ethernet connectivity
Energy Bar 632 – Smart Power Management
Control up to 13 devices
8 independent AC outlets with power monitoring
3x 1LINK ports + 2x 24V DC outputs
Detect equipment failure (heaters, pumps, lights)
Intelligent Automation with Apex Fusion
Cloud-based control from anywhere
Custom dashboards with drag & drop interface
Log dosing, testing, and maintenance
No app installation required
Smart Features You’ll Love
Liquid Level Sensor (LLS)
Measures exact water depth (not just on/off)
Tracks evaporation, dosing, and reservoir levels
Prevents ATO failures and dry runs
Optical Leak Detection (LD-3)
Works on any surface (even metal)
Reusable & corrosion-resistant
Instant leak alerts
Lab-Grade Probes
High-precision pH, ORP, and temperature probes
Stable readings with less frequent calibration
Seamless Expansion
Fully compatible with previous Apex modules
Expand infinitely with Neptune accessories
Integrates with WAV pumps, DOS systems, and more
What’s Included
A3 Apex Pro Base Unit
Energy Bar 632
Temperature Probe
pH Probe
ORP Probe
Liquid Level Sensor (LLS)
Optical Leak Sensor (LD-3)
Aquabus Cable
Calibration Solutions (pH 7 & 10)
Mounting Accessories
Note
Salinity probe sold separately.
Neptune Systems A3 Apex
The A3 Apex System provides the control but scaled back monitoring with room to grow for the everyday aquarist. This kit offers you more options than the Apex jr. ...
Core Control and Daily Surveillance'.
The A3 Apex System provides the control but scaled back monitoring with room to grow for the everyday aquarist. This kit gives you more options than the Apex jr.
The A3 Apex is the perfect monitoring system for you if you:
want to monitor your aquarium at any time and from any device
control critical parameters, such as temperature
want to be notified via SMS or e-mail when the parameters are out of specification
want to know when the power or Wi-Fi connection to your aquarium is lost
want to be alerted to a possible overflow or leak around your aquarium
want to automate equipment to respond to parameter changes or emergency situations
wants to know which equipment works efficiently and correctly
want to be alerted or take action based on wawter above or below a certain level.
The A3 APEX has the following features:
Temperature monitoring
pH monitoring
3x FMM portals
6x Controllable outputs
3x 1Link output
2x DC 24V output
6x Digital inputs
Audible alarm Buzzer
Wi Fi
Wired Ethernet
Analog leak detection
Optical sensor (Solid Surface Leak Sensor)
Characteristics
Monitors critical parameters (temperature and pH)
Track changes from any device
Warns you of changes
Easy to install
Seamless Control, Enhanced Visibility
View Essential Parameters at a Glance
Access Your Apex Without a Smart Device or Computer
Orange Backlit LCD Display
Compatible with all Apex Controllers
The Apex Display Module by Neptune Systems is all about making your aquarium keeping life easier. It allows you to view your aquarium's essential water parameters at a glance and gives you access to your Apex controller, all without having to open Apex Fusion on your smart device or computer. With the ability to program and cycle through multiple display screens and activate feed modes or maintenance tasks with the push of a button, managing your aquarium has never been more straightforward or efficient. The Apex Display Module also features a built-in speaker that can play one of many sounds if an alarm on your Apex is triggered.
Specifications
Display: Orange Backlit LCD
Compatibility: All Neptune Systems Apex Aquarium Controllers
Connection: Wired via Aquabus Port
Please note: must be used with a Neptune Systems Apex System EL or Neptune Systems Apex System When Neptune decided to create an Energy Bar for this new Apex, they have designed it from the ground up. Not only does the Energy Bar 632 have six 220V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports.And, each individual outlet has independent power monitoring and there are individual LED indicators for each outlet.CERTIFIED TO CE STANDARDS
Your safety is important to Neptune Systems. This is why we design every product to established safety standards. In the case of the Energy Bar 632, and given it is a line-voltage device, we have taken that a step further and confirmed it meets CE Safety Standards.POWER MONITORING
For years we have been asked to provide power monitoring of the individual devices connected to each outlet – but it just wasn’t possible without pricing the product out of the range of most consumers. Now it’s here and with comes tons of benefits. With this power information regularly monitored, you now know when your pump, skimmer, powerhead, UV, or any other device is not operating normally and an alert message can be sent. This enables you to catch issues right when they happen – or better yet when they are on the road to failure. Also, for many of us the cost of the electricity to run a successful aquarium is a major concern in our household. Even for those where electricity is cheap, we believe most aquarists care a great deal about their energy consumption and its effect on the environment. Ironically, our energy usage could be directly connected to excess greenhouse gasses, the warming of the oceans, and the bleaching of the corals! However, armed with this power usage information, we believe aquarists will not only be able to make operating and purchase decisions that will save them hundreds of dollars a year, but they will also be able to reduce their carbon footprint.BUILT-IN 1LINK AND 24VDC PORTS
This Energy Bar has a built-in 100W, 24VDC power supply that can control up to three Neptune Systems 1LINK products like the WAV and DOS. It also includes two switchable 24V DC on/off outlets that are compatible with any 24V device under 30W and Neptune Systems 24V accessories like our Practical Multi-purpose Utility Pump (PMUP) and solenoid valve.INDIVIDUAL OUTLET INDICATOR LED
Each Energy Bar AC outlet as well as the two 24VDC accessory ports have their own status LED. This LED tells you when that outlet is energized. The LED will also blink rapidly if a device is plugged in that exceeds the current capability for that outlet.ALARMS AND DECISIONS BASED ON POWER
Since the Apex is receiving continual power usage data from the Energy Bar 632, it can be configured to send you notifications when a device is not using power as it should be. An example would be a return pump showing no power consumption when the outlet is on. Or, tell you when a skimmer has a clogged airline because power consumption will show differently than normal operation. These high and low limits are completed customizable by individual outlet. You can even use this power data to control other devices.ALL OUTLETS RELAY SWITCHED
Times have changed and it is fairly uncommon now for aquariums to have AC devices that must be cycled on and off continuously. This means that we could now switch all AC outlets to relay switching.
The Dual Digital Temperature Controller is designed to allow precise control of the temperature in an aquarium and has 2 modes which allow control of both heating and cooling at the same time.
Double mains power socket – one power socket for heater control and the other for fan/chiller control.
Display with temperature sensor – used to set and display temperature and alarms and measure temperature.
The plastic coated temperature sensor is waterproof and suitable for use in a marine aquarium.
Features
Plug and play - no wiring required.
Heating/cooling can be set to within 0.3 deg C of target temperature e.g. Control Range of 24.7 - 25.3 deg C (with set temp of 25 deg C).
Audible and Visual Alarm Function e.g alarm sounds if temp below 24 deg C or above 26 deg C (with alarm set to 1 deg C).
2m long plastic coated temperature sensor with mounting suction cup.
Heating Control (resistive load, such as heater) max 1600W.
Cooling Control (inductive load, such as a chiller) max 600W.
Display: Back lit blue LCD – permanently lit.
Power off memory function
Specifications
Size:
Display panel size: 95mm x 50mm x 15mm
Control socket size: 160mm x 70mm x 45mm
Technical Parameters:
Temperature control range: 10 - 32 deg C
Temperature differential setting range 0.3 – 2.0 deg C
Alarm function range: 0.5 – 5 deg C of set point temperature
Resolution: 0.1 deg C
Accuracy: ±1 deg C (30 - 50 deg C)
Power supply: 220VAC±10%, 50/60Hz
Power consumption: ≤3W
Product Code TC125
A3 Apex Jr: Aquarium Monitoring for All
Essential Monitoring of Temperature, pH, and Water Levels
Leak Detection Sensor Included
Expandable: Add on other Apex Modules to Expand Your System
Built-In WiFi & Remote Access via Apex Fusion
Notifications when Parameters Fall Outside Set Safe Zones
Why Do I Need an Aquarium Monitor?
An aquarium monitor is a valuable tool for any aquarist. It serves as your eyes and ears, continuously checking and reporting the vital parameters that ensure the health and stability of your aquarium. By keeping track of temperature, pH, water level, and potential leaks, an aquarium monitor:
Prevents Disasters: Early detection of abnormal conditions, such as temperature, allows for immediate intervention, preventing potential damage and loss.
Saves Time and Money: Automated monitoring reduces the need for frequent manual testing and can help avert costly repairs from unnoticed issues.
Enhances Peace of Mind: With real-time alerts and remote access, you can be assured that your aquarium is functioning well, even when you're not home.
Why Should I use the A3 Apex Jr. on my Aquarium?
The A3 Apex Jr is an affordable, entry-level monitoring solution that keeps tabs on only your most essential tank needs. Track temperature and pH plus water level and leak detection to protect your aquarium and home.
The A3 Apex Jr features two AquaBus ports that will allow you to connect additional modules and accessories to continue building out your control system. This gives you the option to add on what you need, when you need it. Want to add Salinity monitoring? Just connect a PM2 module and conductivity probe. How about control and monitoring of pumps, lights, and other equipment? Pick up an EB832 Power Bar.
The Apex Fusion App - Apex Fusion is a free cloud-based service that allows you to connect to your Apex from anywhere in the world! This user-friendly platform allows effortless monitoring of your aquarium's vital parameters. With features like drag-and-drop customization, easy-to-use task functions to set up new equipment, and real-time alerts, Apex Fusion ensures that maintaining optimal conditions in your aquarium is hassle-free and efficient.
What Else Do I get with the A3 Apex Jr?
Aside from the A3 Apex Jr. itself, included in the box are four monitoring probes/sensors that give you temperature, pH, water level, and leak detection.
Temperature Probe: If the temperature falls outside of the specified safe zone, you'll receive a notification so that you can correct the issue. Crucial for detecting malfunctioning heaters early, allowing you to fix the problem before it's too late.
pH Probe: Knowing your aquarium's pH is helpful in a number of ways, but particularly useful if you're dosing two-part or kalkwasser to your aquarium. For example, the pH probe might help you detect a potential overdose due to a stuck dosing pump.
Magnetic Optical Sensor (MOS): This low-profile level sensor can be used for a number of purposes such as a high or low level warning in your sump or dosing container. It can be mounted on any type of material up to 1/4" thick.
LD-2 Leak Detection Sensor: Protect your floors by placing this sensor inside your aquarium stand or any other flat surface where an overflow may cause issues. If water ever touches the sensor, your A3 Apex Jr. can notify you so you can take action.
What's Included?
A3 Apex Jr Base Unit
Power Supply
Temperature Probe
pH Probe
MOS Magnetic Optical Sensor
LD-2 Leak Detection Sensor
Calibration Solutions (7 & 10)
Mounting Screws
Getting Started Card
