What is Medic?
Medic is a highly effective water conditioner used to de-pollute water in both marine and freshwater environments. It contains a reef-safe oxidizing agent and is particularly effective against: Marine Ich - Crytpocaryon irritans, Freshwater Ich - Ichthyophthirius, and Marine Velvet - Amyloodinium ocellatum.
Features
Completely reef-safe
Buffered to maintain physiological pH
Does not harm invertebrates
Does not harm nitrifying bacteria
How Medic Works:
Completely reef-safe, Bufferded to maintain physiological pH. Does not harm invertebrates and does not harm nitrifying bacteria. Many external fish parasites have very similar life cycles. In particular, these parasites have an "attached stage (trophonts), a "matured" stage (protomonts, a "reproductive" stage (tomonts), and a "free-swimming" stage (theronts/dinospores).
Most available Products do not target the free-swimming stage of the parasite which is one of the primarily difficulties in dealing with these problems. Research with dilated protozoans has shown that the "free-swimming" stage of parasites have remarkably consistent hatching times. Our conditioner targets the trophont stage of the parasite but is also disrupting the life cycle during the "free-swimming timeframe - when the oxidative component in the conditioner is particularly effective against theronts/dinospores.
Directions:
For in tank treatment: Use one level scoop of Medic for every 190L (50 Gallons) of your system volume twice per day For serious problems use (3) level scoop for every 190L (50 Gallons) of your system volume. Add once in the morning, and once in the evening. Continue to Add for 10 days up to a maximum of 20 days.
Note: Ozone and carbon must not be used during the treatment. Protein skimmers can be run as as normal. UV filter can be used one hour after dosing. The problem may seem to disappear when white specks are no longer visible on the fish. This is merely part of the natural cycle of the parasite and you must continue adding the product for the minimum entire course (10 days). Once complete, run granular activated carbon for 2 or 3 days.
Take professional pictures of coral and fish directly from your phone!
Using a phone to take pictures of a saltwater aquarium can be difficult with the high amount of blue that is emitted from the light and the glare off the glass from external light sources. Taking a decent picture usually requires changing your lighting spectrum and playing with your camera's settings. Professional photographers use colored filters to accentuate colors, and shooting photos of reef tanks are no different. Just clip the PolypLab Coral View Lens onto your phone, attach your preferred filter lens and start showing off your corals and fish.
Polyp Lab's Coral View Lens is ideal for reef tanks with their modular lens system. You can use one filter or if you need a little more fine-tuning, use multiple lenses to get the perfect photo. You no longer need to adjust your lighting spectrum just to take a photo.
New & Improved Orange 15K Filter Lens
Perfect for full tank shots
Great for pictures of frags
Can be stacked on top of Macro Lens
All-In-One Polarized V2 Filter Lens
Perfect for filtering out glare from glass
Sharp detail
Stack behind 15K & 20K lens
What's Included?
1x Lens Holder Clip1x All In One Polarized V2 Filter Lens1x Orange 15K Filter Lens1x Cleaning Cloth
Reef-Roids from Polyplab is a specially engineered coral food to enhance the growth and coloration of your reef corals.
Ingredients: Marine planktons containing a species of zooplankton unique to Reef-Roids
Formulated to minimize water degradation
Feed all filter feeding corals such as Goniopora, Zoanthids, mushrooms
Particle size: 150-200 microns
Reef-Roids was originally produced for feeding the Goniopora genus but later became popular for feeding all filter feeding corals in your saltwater aquarium. Reef-roids is NOT made with processed fish meals or other ingredients that can rapidly degrade water quality. Reef-roids is a mixture of naturally occurring marine planktons including a specific species of zooplankton that is unique to our product. It mixes well into water and does not float to the surface minimizing food waste. For best results, turn off any circulation in your reef tank and use a bottle, syringe or feeding tool to target feed your corals.
Sizes Available
75 Gram - feeds 100 gallon reef tank for 3 months using 2 times per week
37 Gram - feeds 50 gallon reef tank aquarium for 3 months using 2 times per week
For every 100 gallons of tank volume, mix 1 teaspoon of Reef-Roids (25 gallons of tank volume, mix 1/4 teaspoon) with some of the tank water to create an even paste. Target feed your corals or disperse into a high flow area of the tank and then turn off circulation.
Guaranteed Analysis:
Crude Protein (min) - 60%
Crude Lipid (min) - 20%
Crude Fiber (max) - 8%
Ash (max) - 6%
Moisture (max) - 6%
Astaxanthin 150-200 ppm
Extra Thick Coral Frag Super Glue!
Not all super glues are the same and Polyplab's Premium Coral Frag Glue is the perfect solution for larger frags and extended fragging sessions. The ultra-thick super glue gel has a bunch of uses, from regular fragging, aquascaping, or even placing entire colonies on rocks. The composition of the glue allows it to be workable for an extended period of time, allowing you to work with the coral for the perfect placement. If you need to work underwater, the tube design keeps water from being sucked back into the tube, keeping the glue within the tube from being compromised. Every tube comes with its own applicator stem, and initial use child protection ring.
8-hour working time
Perfect for long fragging sessions
Ultra-thick for large gaps and support
Tube design leads to less waste
Reacts and bonds in water within 5-15 seconds
Made for use with freshwater or saltwater
Rapidly trigger coral feeding responses in corals, inverts and other marine life within seconds of it being introduced to your tank. The increased feeding response give your corals the ability to absorb more food each feeding.
18 Amino Acids
12 Fatty Acids
Natural Astaxanthan pigment
Polyp-Booster is an additive that helps increase responses in LPS and SPS corals. Using high quality components and ingredients that provide superior nutrition for your corals, helping increase their overall color and coloration. Polyp-Booster contains 18 different Amino-acids, and 12 different Fatty acids that corals require for digestion, health, and vibrance.
Directions for use: Add 1mL per 60 gallons of aquarium water 30-60 seconds before using Reef-Roids or other coral foods.
Ingredients:
Amino Acids (60% dry weight)
Fatty Acids (20% dry weight)
Astaxanthan Pigments from natural sources
Reef-Roids from Polyplab is a specially engineered coral food to enhance the growth and coloration of your reef corals.
Ingredients: Marine planktons containing a species of zooplankton unique to Reef-Roids
Formulated to minimize water degradation
Feed all filter feeding corals such as Goniopora, Zoanthids, mushrooms
Particle size: 150-200 microns
Reef-Roids was originally produced for feeding the Goniopora genus but later became popular for feeding all filter feeding corals in your saltwater aquarium. Reef-roids is NOT made with processed fish meals or other ingredients that can rapidly degrade water quality. Reef-roids is a mixture of naturally occurring marine planktons including a specific species of zooplankton that is unique to our product. It mixes well into water and does not float to the surface minimizing food waste. For best results, turn off any circulation in your reef tank and use a bottle, syringe or feeding tool to target feed your corals.
Sizes Available
75 Gram - feeds 100 gallon reef tank for 3 months using 2 times per week
37 Gram - feeds 50 gallon reef tank aquarium for 3 months using 2 times per week
For every 100 gallons of tank volume, mix 1 teaspoon of Reef-Roids (25 gallons of tank volume, mix 1/4 teaspoon) with some of the tank water to create an even paste. Target feed your corals or disperse into a high flow area of the tank and then turn off circulation.
Guaranteed Analysis:
Crude Protein (min) - 60%
Crude Lipid (min) - 20%
Crude Fiber (max) - 8%
Ash (max) - 6%
Moisture (max) - 6%
Astaxanthin 150-200 ppm