Sign up for our newsletter
Subscribe to our emails
Sale
-
Eheim LOOP15000 Set w.flow-through filter
Crystal clear pond water and healthy living conditions for plants and animal life! The biological - mechanical 4 stage process of our LOOP filter system guarantees a natural environment. The water is automatically pumped through several filter layers and then through the integrated UV clarifier, before flowing back into your pond free of algae and dirt particles. All components are perfectly coordinated and very low-maintenance: Connect, start, enjoy! Complete set - ready to install Integrated FLOW5000 energy-saving pump with overheating protection in case of low water levels New spray arm for optimum distribution of pond water onto the filter media Outer container made of shockproof and UV resistant all-weather plastic Includes original EHEIM filter media Scope of delivery: Filter box with lid and filter media 5 m spiral hose (1 inch) Connection accessories FLOW5000 filter pump CLEARUVC 11W Cable length: 10 m Cable length CLEARUVC: 5 Dimensions Pump w x d x h : 241 x 254 x 122 Dimensions w x d x h: 603 x 398 x 368 Hose diameter: 1 Manufacturer guarantee: 3 Year(s) Maximum delivery head: 3,1 Maximum flow rate: 4600 Pond size with fish: 7500 Pond size with koi: 3900 Pond size without fish: 15000 Power: 50 Power CLEARUVC: 14 Power UVC-Lamp: 11 Power supply: 220-240 / 50 V/Hz Pump: FLOW5000 UV clarifier: CLEARUVC-11
380.000 JD
-
Eheim PRESS7000 pond filter with CLEARUVC9W
Crystal clear pond water and healthy living conditions for plant and animal life. The innovative PRESS pressure filter combines maximum filter performance with ease of operation in a way that sets new standards. Thanks to the revolutionary backwash technology, the system can be effectively cleaned without opening the filter: Simply turn the lever in the lid down and the water flows in the reverse direction, cleaning the filter as it goes. Why should you choose a pressure filter? The integrated pressure pump enables the supply of water to higher level streams but can also be used below the water level of your pond. All components are perfectly coordinated and very low-maintenance. Connect, start, enjoy! Complete set - ready to install. High performance complete set with revolutionary BACKWASH cleaning technology: Simply turn the lever in the lid down and the water flows in the reverse direction, cleaning the filter. Integrated FLOW2500 energy-saving pump with overheating protection in case of low water levels Outer container made of shockproof and UV resistant all-weather plastic Includes original EHEIM filter media Scope of delivery: PRESSPressure filter FLOW2500 filter pump CLEARUVC9 UV Clarifier 5 m spiral hose (1 inch) Filter media Connection set Cable length: 10 m Cable length CLEARUVC: 5 Dimensions w x d x h: 241 x 254 x 122 Dimensions w x d x h CLEARUVC: 132 x 263 x 129 Dimensions Ø x h : 320/600 Hose diameter: 1 Manufacturer guarantee: 3 Year(s) Maximum delivery head: 2,4 m Maximum flow rate: 2300 l/h Pond size with fish: 3500 Pond size with koi: 1800 Pond size without fish: 7000 Power: 38 W Power CLEARUVC: 11 Power UVC-Lamp: 9 Power supply: 220-240 / 50 V/Hz Pump: FLOW2500 UV clarifier: CLEARUVC-9
380.000 JD 365.000 JD
-
Eheim Thermocontrol+e 200 WIFI-heater
With EHEIM thermocontrol+ e, we offer you the aquarium heater of the future. Intelligent and ingeniously designed.EHEIM thermocontrol+ e is our first adjustable heater with digital control via WLAN. You can set the precise temperature from 18 to 32 °C via smartphone, tablet or PC/MAC. The selected temperature is accurately measured electronically and kept constant. However, if the temperature deviates by ± 2 °C, you will be notified immediately by e-mail. Automatic synchronisation with filter activity or lighting is also possible, this means you can wirelessly connect to the EHEIM professionel 5e Filter or to the LEDcontrol+.The construction of the thermocontrol+ e conforms to that of our proven thermocontrol heaters. The combination of the special laboratory glass cover, the flawless finish, the high quality materials and the absolute reliability, provides the ultimate heater. The heaters have a 3-year guarantee and there are 4 sizes to choose from - whether you want to heat a 200 or 1000 litre aquarium.Advantages of EHEIM thermocontrol+ e Electronic aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC. Precise temperature setting from 18 to 32 °C Control accuracy ± 0,5 °C Indicator lights show heating function and operating status Notification to stored e-mail address as soon as the temperature deviates by ± 2 °C Smart linking with other electronically controlled devices of the EHEIM.digital family Synchronisation: temperature water flow adjustment or for lowering the set temperature at night, etc.) If necessary, adjustment with external thermometer (expert mode) Waterproof (IPX8) - for optimum wifi signal reception, immerse the heater in water up to the mark Dry-run protection (Thermo Safety Control) Convenient cable length of approx. 170 cm Double suction holder included 4 sizes for aquariums from 200 up to 1000 litres Suitable for both fresh and marine water Highest safety and reliability with a 3 year guarantee. The smart aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC.Adjustment and controlThe EHEIM thermocontrol+ e aquarium heater is the advanced development of the thermocontrol e heater. Unlike the latter, it is not set manually, but programmed and monitored wirelessly via WLAN and by smartphone, tablet or PC/MAC.It can be accurately set from 18 to 32 °C. If the set temperature ever deviates by +/-2 degrees, you will receive an e-mail notification, provided you have stored a corresponding address.Synchronisation with other devicesA special highlight is that the thermocontrol+ e can be synchronised with other devices in the Eheim Digital Family such as the EHEIM professionel 5e filter or the lighting control LEDcontrol+. You can therefore specify that the set temperature rises or falls when, for example, the filter flow (in bio mode) increases or decreases or the LED lighting is switched off or on.Example: The filter flow is increased at night and the lighting is switched off. The set temperature is automatically adjusted accordingly: 25 °C during the day; 23 °C at night. (Please note: Water is not cooled down - the heater has no integrated cooling).WLAN-connectionThe thermocontrol+ e is waterproof and fully submersible. For an optimal WLAN connection, however, the heater may only be immersed up to the "water level" mark.For the security of your device, every EHEIM thermocontrol+ e is encrypted ex works (password can be adjusted). After setting the desired temperature, the wifi network can be switched off. Dimensions in Ø: 32 mm For aquariums of about.: 300l For aquariums up to approx.: 400l Freshwater: Yes Height: 386 Manufacturer guarantee: 3 Year(s) Max. temperature: 32 Min. temperature: 18 Packing: 6 Part (s) Performance at 50 Hz: 200 Watt Sea water: Yes WiFi: Yes
52.000 JD
-
Eheim pHcontrol+e Set
EHEIM pHcontrol+e – the smart controller for monitoring and readjusting the pH value in your aquariumWith the EHEIM pHcontrol+e you can easily monitor and optimize the pH in your aquarium via a smartphone, tablet, or PC/MAC simply via a WiFi connection and your web browser. A pH sensor measures the current pH value of the water, and the pHcontrol+e automatically provides the necessary CO2 supply. By controlling the magnetic valve connected in series to the CO2 system it adds as much CO2 as required until the desired pH value is reached.To achieve this you must connect your CO2 system, i.e., a CO2 bottle via pressure reducer as well as magnetic valve (see the EHEIM CO2 sets) and a CO2 diffuser. The pHcontrol+e has a day/night control and can be linked to the lighting control EHEIM LEDcontrol+e (see the EHEIM DIGITAL family).In addition to light, nitrogen, phosphate, trace elements, etc., the plants in your aquarium need CO2 above all as an important nutrient. The better they thrive, the more oxygen they release, which the fish need to breathe. Thus, the EHEIM pHcontrol+e indirectly provides oxygen and the optimal pH value for your fish by adding CO2. This is usually between pH 6 and pH 8; pH 7 is considered a neutral value for reference.Note:The basis for measuring and stabilising the pH value is the carbonate hardness ("KH") of the water. Therefore, the EHEIM pHcontrol+e (in Smart mode) initially queries the KH value. Because KH, CO2 and pH value influence each other.Features of the EHEIM pHcontrol+e A smart controller for monitoring and controlling the pH value in the aquarium by regulating the addition of CO2. Includes Wireless WiFi connection with a WLAN-enabled end device (smartphone, tablet, PC/MAC). Has connection and compatibility with devices of the EHEIM DIGITAL family. Measures the pH value through the pH sensor (measuring range: pH 0 to pH 14). Control range of the controller pH 6 to pH 9. Needs to be coupled via pressure reducer with CO2 bottle (EHEIM CO2 set). Electronically controls addition of CO2 through interposed magnetic valve. Adjusts CO2 addition by linking with LEDcontrol+e (day/night control) in smart mode or simple and extended bio mode with own day/night control. Queries the KH value (carbonate hardness) in advance. Sets water test and calibration reminders. Guided calibrations of the pH sensor. Sends warning for deviation of pH value (up/down). Notes if EHEIM pH sensor needs to be replaced. Provides best performance, high power, stable connection, and large memory capacity through new improved chip generation Highest safety and reliability - 3 years warranty
180.000 JD
-
Eheim professionel 5e 350 external filter
The EHEIM professionel 5e offers you unique intelligence and several functional advantages.The EHEIM professionel 5e is our best external filter to date, offering everything an aquarium enthusiast could wish for. Each function can be individually programmed and controlled wirelessly. The electronic system monitors all functions and keeps the flow constant as well as delivering strong performance due to the large filter volume. The clever design and the regulation of the electronic flow extend the maintenance intervals for the biological filter material considerably and, in addition, there is the acclaimed smooth EHEIM performance. The skilled workmanship, the high quality materials and the renowned "Made in Germany" reliability, combined with the 3 year warranty, leave nothing to be desired.There are four filter versions available, including a thermofilter (600T) with integrated heater, developed for aquariums ranging from 180 to 700 litres, In addition, the professionel 5e 350 offers two special advantages: It is fully equipped with filter media and you can extend the filter function (Xtender).Advantages of the EHEIM professionel 5e(all versions) Highend technology for the most demanding criteria Electronic professional filter with integrated Wifi function and wireless control via smartphone, tablet or PC/MAC No extra app is required for control Individual program settings: Constant flow, bio mode, pulse mode and manual mode Linking with other devices possible (e.g. lighting control LEDcontrol+) Constant monitoring of the maintenance interval; cleaning instructions are automatically sent to the stored e-mail address Permanent electronic system monitoring (including automatic air removal; fault elimination) Wifi function can be deactivated after configuration Large prefilter easily accessible (directly under the pump head) for quick removal of mechanical contamination without having to disturb the sensitive bio-filter material Large canister and filter volume The filter canister fills quickly due to the integrated suction aid Highquality wear-free ceramic axle and bearings guarantee quiet performance Safety hose adapter with easy-to-operate locking device; the adapter can only be released when the hose valves are closed Large safety closure clips for a tight and safe connection between the pump head and filter canister Easy Clean – easy and safe cleaning of the filter media with the help of the cleaning cover Comes with installation accessories Suitable for fresh and marine water (except thermofilter – for freshwater only) Made in Germany 3 years warranty Special features of the models: EHEIM professionel 5e 350 Fully equipped with original EHEIM filter media and installation accessories Extension of the filter function using the (Xtender) control dial EHEIM professionel 5e 600T Thermofilter with integrated heater Only suitable for fresh water EHEIM professionel 5e – the electronic external filter with wireless control and many advantagesThe EHEIM professionel 5e was developed for aquarium enthusiasts with very high demands for ease of use and quality. It combines powerful pump performance and a large canister and filter volume with clever design advantages and intelligent electronic control. With the integrated Wifi function, it can easily be configured wirelessly via smartphone, tablet or PC/MAC. The individual functions are: constant flow, bio mode, pulse mode and manual mode. In addition, the professionel 5e can be linked with other devices - e.g. with the LEDcontrol+ lighting control system.The individual settings and functions are as follows:output control:Gradual increase of the water flow rate - the maximum capacity exceeds the performance of conventional filters.constant flow:Increased pollution in the filter is electronically detected and automatically adjusted to your programmed output. This guarantees a constant flow rate and extended maintenance intervals.Pulse mode:The electronically controlled alternating current ensures natural flow conditions in the aquarium.bio modus (sun/moon):Changes between 2 adjustable flow rates.service indicator:Constant monitoring of the maintenance interval. Cleaning notification is automatically sent to a stored e-mail address. auto air out:Accumulated air under the filter head are detected and automatically discharged by an electronic program.electronic error indicator:Permanent electronic system monitoring. This starts a program that automatically attempts to eliminate the cause of any errors.Wifi off:Optionally, the integrated Wifi function can be deactivated after each configuration. The filter can still be operated without Wifi. To use the functions again, the Wifi function must be reactivated. You can download the current software here: EHEIM Downloads Container volume: 7.4 l Depth: 244 Filter volume: 4.5 l For aquariums of about.: 180l For aquariums up to approx.: 350l For outdoor use: No Freshwater: Yes Height: 398 Hose Ø Suction side: 16.0/22.0 mm Hose Ø Suction side: 16.0/22.0 mm Installation height: 180 cm Manufacturer guarantee: 3 Year(s) Packing: 1 Part (s) Packing dimensions(Depth): 24 cm Packing dimensions(Height): 44 cm Packing dimensions(Width): 29.8 cm Power of: 35 Watt Power to: 10 Watt Pre filter volume: 0.5 l Pumping head approx. (H max): 2.2 m Pump power per hour of approx.: 1500l Sea water: Yes WiFi: Yes Width: 238
350.000 JD
-
Eheim Thermocontrol+e 300 WIFI-heater
With EHEIM thermocontrol+ e, we offer you the aquarium heater of the future. Intelligent and ingeniously designed.EHEIM thermocontrol+ e is our first adjustable heater with digital control via WLAN. You can set the precise temperature from 18 to 32 °C via smartphone, tablet or PC/MAC. The selected temperature is accurately measured electronically and kept constant. However, if the temperature deviates by ± 2 °C, you will be notified immediately by e-mail. Automatic synchronisation with filter activity or lighting is also possible, this means you can wirelessly connect to the EHEIM professionel 5e Filter or to the LEDcontrol+.The construction of the thermocontrol+ e conforms to that of our proven thermocontrol heaters. The combination of the special laboratory glass cover, the flawless finish, the high quality materials and the absolute reliability, provides the ultimate heater. The heaters have a 3-year guarantee and there are 4 sizes to choose from - whether you want to heat a 200 or 1000 litre aquarium.Advantages of EHEIM thermocontrol+ e Electronic aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC. Precise temperature setting from 18 to 32 °C Control accuracy ± 0,5 °C Indicator lights show heating function and operating status Notification to stored e-mail address as soon as the temperature deviates by ± 2 °C Smart linking with other electronically controlled devices of the EHEIM.digital family Synchronisation: temperature water flow adjustment or for lowering the set temperature at night, etc.) If necessary, adjustment with external thermometer (expert mode) Waterproof (IPX8) - for optimum wifi signal reception, immerse the heater in water up to the mark Dry-run protection (Thermo Safety Control) Convenient cable length of approx. 170 cm Double suction holder included 4 sizes for aquariums from 200 up to 1000 litres Suitable for both fresh and marine water Highest safety and reliability with a 3 year guarantee. The smart aquarium heater with integrated WLAN function and digital control via smartphone, tablet or PC/MAC.Adjustment and controlThe EHEIM thermocontrol+ e aquarium heater is the advanced development of the thermocontrol e heater. Unlike the latter, it is not set manually, but programmed and monitored wirelessly via WLAN and by smartphone, tablet or PC/MAC.It can be accurately set from 18 to 32 °C. If the set temperature ever deviates by +/-2 degrees, you will receive an e-mail notification, provided you have stored a corresponding address.Synchronisation with other devicesA special highlight is that the thermocontrol+ e can be synchronised with other devices in the Eheim Digital Family such as the EHEIM professionel 5e filter or the lighting control LEDcontrol+. You can therefore specify that the set temperature rises or falls when, for example, the filter flow (in bio mode) increases or decreases or the LED lighting is switched off or on.Example: The filter flow is increased at night and the lighting is switched off. The set temperature is automatically adjusted accordingly: 25 °C during the day; 23 °C at night. (Please note: Water is not cooled down - the heater has no integrated cooling).WLAN-connectionThe thermocontrol+ e is waterproof and fully submersible. For an optimal WLAN connection, however, the heater may only be immersed up to the "water level" mark.For the security of your device, every EHEIM thermocontrol+ e is encrypted ex works (password can be adjusted). After setting the desired temperature, the wifi network can be switched off. Dimensions in Ø: 32 mm For aquariums of about.: 600l For aquariums up to approx.: 1000l Freshwater: Yes Height: 486 Manufacturer guarantee: 3 Year(s) Max. temperature: 32 Min. temperature: 18 Packing: 6 Part (s) Performance at 50 Hz: 300 Watt Sea water: Yes WiFi: Yes
60.000 JD
-
Milwaukee Milwaukee pHliquid 7,01 calibration liquid
Milwaukee Calibration Solution sold in single use packets are great for calibrating your pH probe or pen. Many pH probes will start to loose their calibration in as short as a month or two depending on your probe. We suggest calibrating probes every 30-60 days for the most reliable readings. Compatible with all pH meters and probes. Milwaukee Calibration Solution sold in single use packets. Almost all pH monitors and controllers will require two points of reference to accurately monitor the pH that the probe is reading. You will want to use calibration solutions that are on either spectrum of the pH you intend to monitor. For reef tanks where the pH is normally 7.8-8.5 then you would want to use calibration solution 7.0 and 10.01. For calcium reactors on saltwater tanks where the pH is normally below 7.0, you would want to use 4.01 and 7.01 for calibration of the probe. 4.01 pH - The lower threshold reading your pH monitor or controller will require for use with calcium reactors for saltwater aquariums, solutions below 7.00 pH and also most freshwater aquariums. 7.01 pH - Neutral pH calibration packet. This is used by almost all pH monitors and controllers for calibration. 10.01 pH - The higher threshold reading your pH monitor or controller will require for use with saltwater aquariums or solutions above 7.00 pH
8.000 JD
-
Eheim Power supply 36W for classicLED
Eheim - Power supply 36W for classicLED
26.000 JD
-
Eheim Chiller climacontrol+ S Cooling & Heating
You can use EHEIM climacontrol+ to cool down the water temperature on hot days or warm it up on cold days, just as your aquarium inhabitants need it.EHEIM climacontrol+ is our new electronically controlled climate control device. You simply set the ideal water temperature wirelessly - via smartphone, tablet, or PC/MAC. If the water is too warm, the unit automatically cools down, and if it gets too cold it warms up. The unit monitors and controls everything.Also, it gives you advanced warning of any problems, such as if the required temperature is exceeded or undershot by 2 °C for more than 5 minutes, you receive a warning e-mail.High outdoor temperatures often cause the aquarium water to overheat in summer. This is extremely harmful to fish and all other living creatures. For example if the temperature is too high, corals die in the marine aquarium, and in freshwater aquariums, oxygen deficiency and algae proliferation occur quickly.EHEIM climacontrol+ is the optimal climate control device for aquariums. It has low energy consumption and works with environmentally friendly coolant.There are three climate control devices available: S, M and L - for aquariums up to 500, 1000 and 2000 litres and come with a 3-year warranty.Features of the EHEIM climacontrol+ Electronically controlled continuous flow climate control device with Wi-Fi functionality Temperature setting and control over WiFi via smartphone, tablet, or PC/MAC Cooling and heating mode Constant regulation of water temperature Temperature control of water in freshwater and marine aquariums Precise temperature detection from 5 °C up to 35 °C Switches on automatically above or below a set target temperature Warning e-mail if temperature exceeds or falls below 2 °C for more than 5 minutes Constantly displays the current water temperature when in operation Use in the ambient temperature range from 10 °C to 38 °C Very energy-efficient and environmentally friendly climate control devicewith ozone-friendly refrigerant (R290) To be operated exclusively with clean (filtered) water; i.e. for marine aquariums via separate pump with water from the filter tank or for freshwater aquariums position behind the external filter (alternatively via separate pump with pre-filter directly from the aquarium) There are three climate control devices: S, M and L - for aquariums up to 500, 1000 and 2000 litres Made of High quality parts and materials, and comes with 3 years warranty Important for marine water aquariums:Optimum temperature for corals between 24 and 26 °C; above 29.5 °C they die.Important for fresh water aquariums:The temperature should always be below 30 °C. Above this temperature there is a risk of oxygen deficiency, inhibited plant growth, algae proliferation.EHEIM climacontrol+ – the electronically controlled climate control devicewith WLAN function and many advantagesEHEIM climacontrol+ has the main task of cooling down the aquarium water when the temperature is too high. It provides both a cooling and a heating function.In summer, high outside temperatures often lead to overheating of the aquarium water - e.g. in a small room that heats up quickly, in an attic flat, in sunlight, etc. Even in basins that are closed at the top so that the warmth from the lighting cannot escape, there is occasionally a build-up of heat.EHEIM climacontrol+ offers WLAN function. The WiFi controller is used to set the optimum target temperature via smartphone, tablet or PC/MAC. As soon as the temperature exceeds or falls below the target value, the unit switches on and cools or heats the water until the target value is reached. The current water temperature is always displayed. If the set temperature is exceeded or undershot by 2 °C for more than 5 minutes, you will receive a warning e-mail.EHEIM climacontrol+ is a continuous flow unit and should only be operated with clean (filtered) water. For marine water aquariums, this means with water from the filter tank (with a separate pump). In freshwater aquariums by placing it behind the external filter. (Alternatively, operation via a separate pump - but with a pre-filter - directly from the aquarium is also possible here).EHEIM climacontrol+ works energy-efficiently and environmentally friendly. The refrigerant (R290) replaces ozone-depleting coolants and the global warming potential (GWP) is in the minimum range.When positioning the unit, make sure that the ventilation openings are always kept clear. The distance to walls etc. should be at least 50 mm. In the base cabinet of an aquarium combination, for example, appropriate recesses must be provided for fresh air supply and warm exhaust air (for more details, see the operating instructions).ATTENTION! The climate control device may only be stored, transported and operated in an upright position! Dimensions w x d x h: 310 x 310 x 447 For aquariums up to approx.: 500l Freshwater: Yes Hose Ø Suction side(inside): 16/22mm / 19/27mm Manufacturer guarantee: 3 Year(s) Noise level / 80 cm (cooling mode): ~47 – 50 dB Packing: 1 Part (s) Power consumption (cooling mode): 260W (230V) Power consumption (heating mode): 300W Sea water: Yes Water flow max.: 800l/h Water flow min.: 500l/h Weight: 17 WiFi: Yes
950.000 JD
-
Eheim Chiller climacontrol+ M Cooling & Heating
You can use EHEIM climacontrol+ to cool down the water temperature on hot days or warm it up on cold days, just as your aquarium inhabitants need it.EHEIM climacontrol+ is our new electronically controlled climate control device. You simply set the ideal water temperature wirelessly - via smartphone, tablet, or PC/MAC. If the water is too warm, the unit automatically cools down, and if it gets too cold it warms up. The unit monitors and controls everything.Also, it gives you advanced warning of any problems, such as if the required temperature is exceeded or undershot by 2 °C for more than 5 minutes, you receive a warning e-mail.High outdoor temperatures often cause the aquarium water to overheat in summer. This is extremely harmful to fish and all other living creatures. For example if the temperature is too high, corals die in the marine aquarium, and in freshwater aquariums, oxygen deficiency and algae proliferation occur quickly.EHEIM climacontrol+ is the optimal climate control device for aquariums. It has low energy consumption and works with environmentally friendly coolant.There are three climate control devices available: S, M and L - for aquariums up to 500, 1000 and 2000 litres and come with a 3-year warranty.Features of the EHEIM climacontrol+ Electronically controlled continuous flow climate control device with Wi-Fi functionality Temperature setting and control over WiFi via smartphone, tablet, or PC/MAC Cooling and heating mode Constant regulation of water temperature Temperature control of water in freshwater and marine aquariums Precise temperature detection from 5 °C up to 35 °C Switches on automatically above or below a set target temperature Warning e-mail if temperature exceeds or falls below 2 °C for more than 5 minutes Constantly displays the current water temperature when in operation Use in the ambient temperature range from 10 °C to 38 °C Very energy-efficient and environmentally friendly climate control devicewith ozone-friendly refrigerant (R290) To be operated exclusively with clean (filtered) water; i.e. for marine aquariums via separate pump with water from the filter tank or for freshwater aquariums position behind the external filter (alternatively via separate pump with pre-filter directly from the aquarium) There are three climate control devices: S, M and L - for aquariums up to 500, 1000 and 2000 litres Made of High quality parts and materials, and comes with 3 years warranty Important for marine water aquariums:Optimum temperature for corals between 24 and 26 °C; above 29.5 °C they die.Important for fresh water aquariums:The temperature should always be below 30 °C. Above this temperature there is a risk of oxygen deficiency, inhibited plant growth, algae proliferation.EHEIM climacontrol+ – the electronically controlled climate control devicewith WLAN function and many advantagesEHEIM climacontrol+ has the main task of cooling down the aquarium water when the temperature is too high. It provides both a cooling and a heating function.In summer, high outside temperatures often lead to overheating of the aquarium water - e.g. in a small room that heats up quickly, in an attic flat, in sunlight, etc. Even in basins that are closed at the top so that the warmth from the lighting cannot escape, there is occasionally a build-up of heat.EHEIM climacontrol+ offers WLAN function. The WiFi controller is used to set the optimum target temperature via smartphone, tablet or PC/MAC. As soon as the temperature exceeds or falls below the target value, the unit switches on and cools or heats the water until the target value is reached. The current water temperature is always displayed. If the set temperature is exceeded or undershot by 2 °C for more than 5 minutes, you will receive a warning e-mail.EHEIM climacontrol+ is a continuous flow unit and should only be operated with clean (filtered) water. For marine water aquariums, this means with water from the filter tank (with a separate pump). In freshwater aquariums by placing it behind the external filter. (Alternatively, operation via a separate pump - but with a pre-filter - directly from the aquarium is also possible here).EHEIM climacontrol+ works energy-efficiently and environmentally friendly. The refrigerant (R290) replaces ozone-depleting coolants and the global warming potential (GWP) is in the minimum range.When positioning the unit, make sure that the ventilation openings are always kept clear. The distance to walls etc. should be at least 50 mm. In the base cabinet of an aquarium combination, for example, appropriate recesses must be provided for fresh air supply and warm exhaust air (for more details, see the operating instructions).ATTENTION! The climate control device may only be stored, transported and operated in an upright position! Dimensions w x d x h: 310 x 310 x 489 For aquariums up to approx.: 1000l Freshwater: Yes Hose Ø Suction side(inside): 16/22mm / 19/27mm Manufacturer guarantee: 3 Year(s) Noise level / 80 cm (cooling mode): ~50 – 53 dB Packing: 1 Part (s) Power consumption (cooling mode): 300W (230V) Power consumption (heating mode): 300W Sea water: Yes Water flow max.: 800l/h Water flow min.: 500l/h Weight: 18,7 WiFi: Yes
1,250.000 JD
-
Eheim Chiller climacontrol+ L Cooling & Heating
You can use EHEIM climacontrol+ to cool down the water temperature on hot days or warm it up on cold days, just as your aquarium inhabitants need it.EHEIM climacontrol+ is our new electronically controlled climate control device. You simply set the ideal water temperature wirelessly - via smartphone, tablet, or PC/MAC. If the water is too warm, the unit automatically cools down, and if it gets too cold it warms up. The unit monitors and controls everything.Also, it gives you advanced warning of any problems, such as if the required temperature is exceeded or undershot by 2 °C for more than 5 minutes, you receive a warning e-mail.High outdoor temperatures often cause the aquarium water to overheat in summer. This is extremely harmful to fish and all other living creatures. For example if the temperature is too high, corals die in the marine aquarium, and in freshwater aquariums, oxygen deficiency and algae proliferation occur quickly.EHEIM climacontrol+ is the optimal climate control device for aquariums. It has low energy consumption and works with environmentally friendly coolant.There are three climate control devices available: S, M and L - for aquariums up to 500, 1000 and 2000 litres and come with a 3-year warranty.Features of the EHEIM climacontrol+ Electronically controlled continuous flow climate control device with Wi-Fi functionality Temperature setting and control over WiFi via smartphone, tablet, or PC/MAC Cooling and heating mode Constant regulation of water temperature Temperature control of water in freshwater and marine aquariums Precise temperature detection from 5 °C up to 35 °C Switches on automatically above or below a set target temperature Warning e-mail if temperature exceeds or falls below 2 °C for more than 5 minutes Constantly displays the current water temperature when in operation Use in the ambient temperature range from 10 °C to 38 °C Very energy-efficient and environmentally friendly climate control devicewith ozone-friendly refrigerant (R290) To be operated exclusively with clean (filtered) water; i.e. for marine aquariums via separate pump with water from the filter tank or for freshwater aquariums position behind the external filter (alternatively via separate pump with pre-filter directly from the aquarium) There are three climate control devices: S, M and L - for aquariums up to 500, 1000 and 2000 litres Made of High quality parts and materials, and comes with 3 years warranty Important for marine water aquariums:Optimum temperature for corals between 24 and 26 °C; above 29.5 °C they die.Important for fresh water aquariums:The temperature should always be below 30 °C. Above this temperature there is a risk of oxygen deficiency, inhibited plant growth, algae proliferation.EHEIM climacontrol+ – the electronically controlled climate control devicewith WLAN function and many advantagesEHEIM climacontrol+ has the main task of cooling down the aquarium water when the temperature is too high. It provides both a cooling and a heating function.In summer, high outside temperatures often lead to overheating of the aquarium water - e.g. in a small room that heats up quickly, in an attic flat, in sunlight, etc. Even in basins that are closed at the top so that the warmth from the lighting cannot escape, there is occasionally a build-up of heat.EHEIM climacontrol+ offers WLAN function. The WiFi controller is used to set the optimum target temperature via smartphone, tablet or PC/MAC. As soon as the temperature exceeds or falls below the target value, the unit switches on and cools or heats the water until the target value is reached. The current water temperature is always displayed. If the set temperature is exceeded or undershot by 2 °C for more than 5 minutes, you will receive a warning e-mail.EHEIM climacontrol+ is a continuous flow unit and should only be operated with clean (filtered) water. For marine water aquariums, this means with water from the filter tank (with a separate pump). In freshwater aquariums by placing it behind the external filter. (Alternatively, operation via a separate pump - but with a pre-filter - directly from the aquarium is also possible here).EHEIM climacontrol+ works energy-efficiently and environmentally friendly. The refrigerant (R290) replaces ozone-depleting coolants and the global warming potential (GWP) is in the minimum range.When positioning the unit, make sure that the ventilation openings are always kept clear. The distance to walls etc. should be at least 50 mm. In the base cabinet of an aquarium combination, for example, appropriate recesses must be provided for fresh air supply and warm exhaust air (for more details, see the operating instructions).ATTENTION! The climate control device may only be stored, transported and operated in an upright position! Dimensions w x d x h: 310 x 310 x 531 For aquariums up to approx.: 2000l Freshwater: Yes Hose Ø Suction side(inside): 16/22mm / 19/27mm Manufacturer guarantee: 3 Year(s) Noise level / 80 cm (cooling mode): ~51 – 54 dB Packing: 1 Part (s) Power consumption (cooling mode): 400W (230V) Power consumption (heating mode): 300W Sea water: Yes Water flow max.: 800l/h Water flow min.: 500l/h Weight: 19,7 WiFi: Yes
1,450.000 JD
-
Neptune Systems A3 Apex Jr Aquarium Controller System
A3 Apex Jr: Aquarium Monitoring for All Essential Monitoring of Temperature, pH, and Water Levels Leak Detection Sensor Included Expandable: Add on other Apex Modules to Expand Your System Built-In WiFi & Remote Access via Apex Fusion Notifications when Parameters Fall Outside Set Safe Zones Why Do I Need an Aquarium Monitor? An aquarium monitor is a valuable tool for any aquarist. It serves as your eyes and ears, continuously checking and reporting the vital parameters that ensure the health and stability of your aquarium. By keeping track of temperature, pH, water level, and potential leaks, an aquarium monitor: Prevents Disasters: Early detection of abnormal conditions, such as temperature, allows for immediate intervention, preventing potential damage and loss. Saves Time and Money: Automated monitoring reduces the need for frequent manual testing and can help avert costly repairs from unnoticed issues. Enhances Peace of Mind: With real-time alerts and remote access, you can be assured that your aquarium is functioning well, even when you're not home. Why Should I use the A3 Apex Jr. on my Aquarium? The A3 Apex Jr is an affordable, entry-level monitoring solution that keeps tabs on only your most essential tank needs. Track temperature and pH plus water level and leak detection to protect your aquarium and home. The A3 Apex Jr features two AquaBus ports that will allow you to connect additional modules and accessories to continue building out your control system. This gives you the option to add on what you need, when you need it. Want to add Salinity monitoring? Just connect a PM2 module and conductivity probe. How about control and monitoring of pumps, lights, and other equipment? Pick up an EB832 Power Bar. The Apex Fusion App - Apex Fusion is a free cloud-based service that allows you to connect to your Apex from anywhere in the world! This user-friendly platform allows effortless monitoring of your aquarium's vital parameters. With features like drag-and-drop customization, easy-to-use task functions to set up new equipment, and real-time alerts, Apex Fusion ensures that maintaining optimal conditions in your aquarium is hassle-free and efficient. What Else Do I get with the A3 Apex Jr? Aside from the A3 Apex Jr. itself, included in the box are four monitoring probes/sensors that give you temperature, pH, water level, and leak detection. Temperature Probe: If the temperature falls outside of the specified safe zone, you'll receive a notification so that you can correct the issue. Crucial for detecting malfunctioning heaters early, allowing you to fix the problem before it's too late. pH Probe: Knowing your aquarium's pH is helpful in a number of ways, but particularly useful if you're dosing two-part or kalkwasser to your aquarium. For example, the pH probe might help you detect a potential overdose due to a stuck dosing pump. Magnetic Optical Sensor (MOS): This low-profile level sensor can be used for a number of purposes such as a high or low level warning in your sump or dosing container. It can be mounted on any type of material up to 1/4" thick. LD-2 Leak Detection Sensor: Protect your floors by placing this sensor inside your aquarium stand or any other flat surface where an overflow may cause issues. If water ever touches the sensor, your A3 Apex Jr. can notify you so you can take action. What's Included? A3 Apex Jr Base Unit Power Supply Temperature Probe pH Probe MOS Magnetic Optical Sensor LD-2 Leak Detection Sensor Calibration Solutions (7 & 10) Mounting Screws Getting Started Card
300.000 JD
-
HM Digital HM Digital - Dual Inline TDS Meter DM-1
Using a RODI system without a TDS meter is like driving a car without a speedometer and gas gauge. At some point you will end up in trouble. With RODI systems it is TDS that you will want to monitor for performance and filter quality. By using a dual TDS meter it will allow you to see your TDS readings in two places. We will usually suggest putting one probe before the DI stage and one after the DI stage to show what your RO is producing for water quality and then how your DI is performing by removing all remaining TDS from the final product water. The DM-1 Dual Inline TDS Meter from HM Digital is one of the most important reverse osmosis accessories. This tool monitors the TDS of your reverse osmosis system in two places and lets you know exactly how the system is performing. Reef Amorous suggests: installing the dual TDS meter post membrane and post DI stage. These two readings will notify you when it's time to change the RO membrane and DI resin. This unit features a digital display and comes with two 1/4" GA Murdock Quick Connect Tee's with double o-rings to ensure a proper seal. As with all HM-Digital products, the DM-1 comes factory calibrated. Replacement Battery Type - LR44G
30.000 JD
-
Aquarium Munster Aquavital Bacto Groundboost 30 capsules
Aquarium Munster Aquavital Bacto Groundboost contains a balanced mixture of bacteria and active oxygen to care for the ecosystem inside the substrate of aquariums. The capsules are placed directly where they are needed: in the substrate. The inactive bacteria are only activated through contact with water immediately after introduction. The breakdown of mudd and waste materials is promoted by activating the biological cleaning forces in the substrate. Organic deposits are removed and active oxygen eliminates harmful gas compounds. Aquarium Munster Aquavital Bacto Groundboost activates the biology in the ground when setting up a new aquarium. Dosage Aquarium Munster Aquavital Bacto GroundboostPlace one capsule for each 20 l of aqaurium water directly in the gravel.
23.000 JD
-
Aquarium Munster Aquavital Bacto Groundboost 8 capsules
Aquarium Munster Aquavital Bacto Groundboost contains a balanced mixture of bacteria and active oxygen to care for the ecosystem inside the substrate of aquariums. The capsules are placed directly where they are needed: in the substrate. The inactive bacteria are only activated through contact with water immediately after introduction. The breakdown of mudd and waste materials is promoted by activating the biological cleaning forces in the substrate. Organic deposits are removed and active oxygen eliminates harmful gas compounds. Aquarium Munster Aquavital Bacto Groundboost activates the biology in the ground when setting up a new aquarium. Dosage Aquarium Munster Aquavital Bacto GroundboostPlace one capsule for each 20 l of aqaurium water directly in the gravel.
13.000 JD
-
Other Digital pH Meter
Digital pH meters for reef tanks offer precise, instantaneous, or continuous monitoring of aquarium water acidity (ideally 7.8–8.4 pH), allowing for faster coral growth and stable marine environments.
10.000 JD
-
Jebao Battery Air Pump BAP-1050
Rechargeable Air Pump – Jecod BAP Series The rechargeable air pump is an ideal solution during periods of severe global energy shortages, especially in regions with frequent summer power outages such as Vietnam, and also provides peace of mind during long-distance travel or time away from home. It serves as a reliable backup aeration system for aquarium hobbyists, particularly for ornamental fish and KOI keepers, in case of power failures or when transporting fish over long distances. Once fully charged, it can operate for up to 24 hours. The Jecod BAP Series (BAP1080 / BAP2050 / BAP2060) is a newly developed product line from JEBAO, a well-established and reputable brand in China. It features high air output, low power consumption, and fast charging capability, making it an excellent choice for aquarium enthusiasts—especially KOI ponds and live seafood holding systems in restaurants.
100.000 JD 90.000 JD
-
Jebao Battery Air Pump BAP-2050
Rechargeable Air Pump – Jecod BAP Series The rechargeable air pump is an ideal solution during periods of severe global energy shortages, especially in regions with frequent summer power outages such as Vietnam, and also provides peace of mind during long-distance travel or time away from home. It serves as a reliable backup aeration system for aquarium hobbyists, particularly for ornamental fish and KOI keepers, in case of power failures or when transporting fish over long distances. Once fully charged, it can operate for up to 24 hours. The Jecod BAP Series (BAP1080 / BAP2050 / BAP2060) is a newly developed product line from JEBAO, a well-established and reputable brand in China. It features high air output, low power consumption, and fast charging capability, making it an excellent choice for aquarium enthusiasts—especially KOI ponds and live seafood holding systems in restaurants.
145.000 JD 130.000 JD
-
Jebao DMP-20M Wave Maker
Jebao MDP Aquarium Pump – Smart, Silent, and Powerful The Jebao MDP pump is an advanced water circulation solution designed for aquariums, combining strong performance, smart control features, and ultra-quiet operation, making it suitable for both freshwater and marine tanks. Features WiFi & Bluetooth app control for easy management directly from your smartphoneSmart Master-Slave wireless system for synchronizing multiple pumps within the same setupExternal drive controller helps protect electronic components and extends pump lifespanSuper quiet four-pole motor ensures near-silent operation inside the aquarium environmentCompact design with strong performance, ideal for both freshwater and saltwater aquariums Important Note The WiFi version works only within the same home network (local control). It does NOT support remote access outside your home WiFi network.
120.000 JD 109.000 JD
-
Jebao DMP-30M Wave Maker
Jebao MDP Aquarium Pump – Smart, Silent, and Powerful The Jebao MDP pump is an advanced water circulation solution designed for aquariums, combining strong performance, smart control features, and ultra-quiet operation, making it suitable for both freshwater and marine tanks. Features WiFi & Bluetooth app control for easy management directly from your smartphoneSmart Master-Slave wireless system for synchronizing multiple pumps within the same setupExternal drive controller helps protect electronic components and extends pump lifespanSuper quiet four-pole motor ensures near-silent operation inside the aquarium environmentCompact design with strong performance, ideal for both freshwater and saltwater aquariums Important Note The WiFi version works only within the same home network (local control). It does NOT support remote access outside your home WiFi network.
140.000 JD 127.000 JD
-
Jebao DMP-40M Wave Maker
Jebao MDP Aquarium Pump – Smart, Silent, and Powerful The Jebao MDP pump is an advanced water circulation solution designed for aquariums, combining strong performance, smart control features, and ultra-quiet operation, making it suitable for both freshwater and marine tanks. Features WiFi & Bluetooth app control for easy management directly from your smartphoneSmart Master-Slave wireless system for synchronizing multiple pumps within the same setupExternal drive controller helps protect electronic components and extends pump lifespanSuper quiet four-pole motor ensures near-silent operation inside the aquarium environmentCompact design with strong performance, ideal for both freshwater and saltwater aquariums Important Note The WiFi version works only within the same home network (local control). It does NOT support remote access outside your home WiFi network.
170.000 JD 154.000 JD
-
Jebao ACF-300 Cooling Fan
Jebao Automatic Aquarium Cooling Fan is a silent fan for cooling the aquarium water. The system is equipped with a temperature controller that can be used to set the temperature above which the fan must start to cool. Modern cross-flow fan with wide airflow Cools aquarium by 2-4 degrees through evaporative cooling Clamp construction suitable for glass up to 20 mm thick Power: 4W, DC12V 1A Dimension: 2 Dia.x10.5 inch long
36.000 JD
-
IceCap IceCap - Fish Trap 15 x 8 x 9 cm
IceCap Fish Trap disassembles for space-saving storage and assembles in minutes. Bait with food and as soon as the desired fish is inside the trap simply release the mechanism to close the trap. Holds in place with two enhanced suction cups.
30.000 JD
-
IceCap IceCap - Fish Trap 25 x 20 x 20 cm
IceCap Fish Trap disassembles for space-saving storage and assembles in minutes. Bait with food and as soon as the desired fish is inside the trap simply release the mechanism to close the trap. Holds in place with two enhanced suction cups.
37.000 JD
You have seen 384 out of 437 products