The Dual Digital Temperature Controller is designed to allow precise control of the temperature in an aquarium and has 2 modes which allow control of both heating and cooling at the same time.
Double mains power socket – one power socket for heater control and the other for fan/chiller control.
Display with temperature sensor – used to set and display temperature and alarms and measure temperature.
The plastic coated temperature sensor is waterproof and suitable for use in a marine aquarium.
Features
Plug and play - no wiring required.
Heating/cooling can be set to within 0.3 deg C of target temperature e.g. Control Range of 24.7 - 25.3 deg C (with set temp of 25 deg C).
Audible and Visual Alarm Function e.g alarm sounds if temp below 24 deg C or above 26 deg C (with alarm set to 1 deg C).
2m long plastic coated temperature sensor with mounting suction cup.
Heating Control (resistive load, such as heater) max 1600W.
Cooling Control (inductive load, such as a chiller) max 600W.
Display: Back lit blue LCD – permanently lit.
Power off memory function
Specifications
Size:
Display panel size: 95mm x 50mm x 15mm
Control socket size: 160mm x 70mm x 45mm
Technical Parameters:
Temperature control range: 10 - 32 deg C
Temperature differential setting range 0.3 – 2.0 deg C
Alarm function range: 0.5 – 5 deg C of set point temperature
